<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The aim of this study was to highlight the interest of using CFD technique as a diagnostic tool of a malfunctioning Solid Oxide Fuel Cells. Hydrogen starvation of a SOFC due to nitrogen dilution is one of the cell dysfunctions and can lead to its degradation. Identification of the starvation point allows to improve cell performance and establish the best conditions for degradation tests. To illustrate a potential of the CFD tool, several simulations of a single planar SOFC and its behaviour under hydrogen starvation were performed and analysed. The results showed that at lower cell voltage values of 0.3 and 0.5 V significant gradients in the electric current were noticed due to a local reduction in hydrogen concentration. The CFD analysis allowed defining desirable mass flow rate of hydrogen to SOFCs to avoid fuel starvation. The model constitutes a helpful tool for optimizing cell design and operational conditions.</p></abstract>

The aim of this study was to highlight the interest of using CFD technique as a diagnostic tool of a malfunctioning Solid Oxide Fuel Cells. Hydrogen starvation of a SOFC due to nitrogen dilution is one of the cell dysfunctions and can lead to its degradation. Identification of the starvation point allows to improve cell performance and establish the best conditions for degradation tests. To illustrate a potential of the CFD tool, several simulations of a single planar SOFC and its behaviour under hydrogen starvation were performed and analysed. The results showed that at lower cell voltage values of 0.3 and 0.5 V significant gradients in the electric current were noticed due to a local reduction in hydrogen concentration. The CFD analysis allowed defining desirable mass flow rate of hydrogen to SOFCs to avoid fuel starvation. The model constitutes a helpful tool for optimizing cell design and operational conditions.

CFD modelling of hydrogen starvation conditions in a planar Solid Oxide Fuel Cell

Institute of Chemical Engineering and Environmental Protection Processes, Faculty of Chemical Technology and Engineering

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The aim of this study was to highlight the interest of using CFD technique as a diagnostic tool of a malfunctioning Solid Oxide Fuel Cells. Hydrogen starvation...

CFD modelling of hydrogen starvation conditions in a planar Solid Oxide Fuel Cell

Publié en ligne: 08 juil. 2017

Pages: 16 - 25

DOI: https://doi.org/10.1515/pjct-2017-0022

Mots clés
planar Solid Oxide Fuel Cell, fuel starvation, current density, CFD modelling

© 2017 Paulina Pianko-Oprych et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

CFD modelling of hydrogen starvation conditions in a planar Solid Oxide Fuel Cell

Publié en ligne: 08 juil. 2017

Pages: 16 - 25

DOI: https://doi.org/10.1515/pjct-2017-0022

Mots clésplanar Solid Oxide Fuel Cell, fuel starvation, current density, CFD modelling

© 2017 Paulina Pianko-Oprych et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
planar Solid Oxide Fuel Cell, fuel starvation, current density, CFD modelling