<abstract xmlns="http://www.w3.org/1999/xhtml"> In this study, sonochemical-assisted magnesium borate synthesis is studied from different boron sources. Various reaction parameters are successfully applied by a simple and green method. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and Raman spectroscopies are used to characterize the synthesized magnesium borates on the other hand surface morphologies are investigated by using scanning electron microscope (SEM). The XRD analyses showed that the products were admontite [MgO(B2O3)3 · 7(H2O)] with JCPDS (Joint Committee on Powder Diffraction Standards) no. of 01-076-0540 and mcallisterite [Mg2(B6O7(OH)6)2 · 9(H2O)] with JCPDS no. of 01-070-1902. The results that found in the spectroscopic studies were in a good agreement with characteristic magnesium borate bands in both regions of infra-red and visible. According to SEM results, obtained borates were in micro and sub-micro scales. By the use of ultrasonication, reaction yields were found between 84.2 and 97.9%. As a result, it is concluded that the sonochemical approach is a practicable synthesis method to get high efficiency and high crystallinity in the synthesis magnesium borate compounds.</abstract>

In this study, sonochemical-assisted magnesium borate synthesis is studied from different boron sources. Various reaction parameters are successfully applied by a simple and green method. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and Raman spectroscopies are used to characterize the synthesized magnesium borates on the other hand surface morphologies are investigated by using scanning electron microscope (SEM). The XRD analyses showed that the products were admontite [MgO(B2O3)3 · 7(H2O)] with JCPDS (Joint Committee on Powder Diffraction Standards) no. of 01-076-0540 and mcallisterite [Mg2(B6O7(OH)6)2 · 9(H2O)] with JCPDS no. of 01-070-1902. The results that found in the spectroscopic studies were in a good agreement with characteristic magnesium borate bands in both regions of infra-red and visible. According to SEM results, obtained borates were in micro and sub-micro scales. By the use of ultrasonication, reaction yields were found between 84.2 and 97.9%. As a result, it is concluded that the sonochemical approach is a practicable synthesis method to get high efficiency and high crystallinity in the synthesis magnesium borate compounds.

Sonochemical-assisted magnesium borate synthesis from different boron sources

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Sonochemical-assisted magnesium borate synthesis from different boron sources"}

In this study, sonochemical-assisted magnesium borate synthesis is studied from different boron sources. Various reaction parameters are successfully applied...

Sonochemical-assisted magnesium borate synthesis from different boron sources

Publié en ligne: 11 mai 2017

Pages: 81 - 88

DOI: https://doi.org/10.1515/pjct-2017-0012

Mots clés
magnesium borate, sonochemistry, spectroscopic analysis, ultrasonification, XRD

© by Azmi Seyhun Kipcak

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Sonochemical-assisted magnesium borate synthesis from different boron sources

Publié en ligne: 11 mai 2017

Pages: 81 - 88

DOI: https://doi.org/10.1515/pjct-2017-0012

Mots clésmagnesium borate, sonochemistry, spectroscopic analysis, ultrasonification, XRD

© by Azmi Seyhun Kipcak

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
magnesium borate, sonochemistry, spectroscopic analysis, ultrasonification, XRD