<abstract xmlns="http://www.w3.org/1999/xhtml">To determine the mass-moment-of-inertia properties of devices under test with particularly small mass moments of inertia (some 10−4 kg m2), two measurement set-ups based on different measurement principles were developed. One set-up is based on a physical pendulum, the second set-up incorporates a torsion pendulum. Both measurement set-ups and their measurement principles are described in detail, including the chosen data acquisition and analysis. Measurement uncertainty estimations according to the <italic>Guide to the Expression of Uncertainty in Measurement</italic> (GUM) were carried out for both set-ups by applying Monte Carlo simulations. Both set-ups were compared using the same three devices under test. For each measurement result, the measurement uncertainties were estimated. The measurement results are compared in terms of consistency and the resulting measurement uncertainties. For the given devices under test, the torsion pendulum set-up gave results with smaller measurement uncertainties compared to the set-up incorporating a physical pendulum.</abstract>

To determine the mass-moment-of-inertia properties of devices under test with particularly small mass moments of inertia (some 10−4 kg m2), two measurement set-ups based on different measurement principles were developed. One set-up is based on a physical pendulum, the second set-up incorporates a torsion pendulum. Both measurement set-ups and their measurement principles are described in detail, including the chosen data acquisition and analysis. Measurement uncertainty estimations according to the Guide to the Expression of Uncertainty in Measurement (GUM) were carried out for both set-ups by applying Monte Carlo simulations. Both set-ups were compared using the same three devices under test. For each measurement result, the measurement uncertainties were estimated. The measurement results are compared in terms of consistency and the resulting measurement uncertainties. For the given devices under test, the torsion pendulum set-up gave results with smaller measurement uncertainties compared to the set-up incorporating a physical pendulum.

Comparison of Two Experiments Based on a Physical and a Torsion Pendulum to Determine the Mass Moment of Inertia Including Measurement Uncertainties

Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100, 38116 Braunschweig,

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

To determine the mass-moment-of-inertia properties of devices under test with particularly small mass moments of inertia (some 10−4 kg m2), two measurement...

Comparison of Two Experiments Based on a Physical and a Torsion Pendulum to Determine the Mass Moment of Inertia Including Measurement Uncertainties

Publié en ligne: 23 févr. 2017

Pages: 9 - 18

Reçu: 19 oct. 2016

Accepté: 25 janv. 2017

DOI: https://doi.org/10.1515/msr-2017-0002

Mots clés
Torsional pendulum, calibration, measurement uncertainty evaluation

© 2017 Leonard Klaus, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Comparison of Two Experiments Based on a Physical and a Torsion Pendulum to Determine the Mass Moment of Inertia Including Measurement Uncertainties

Publié en ligne: 23 févr. 2017

Pages: 9 - 18

Reçu: 19 oct. 2016

Accepté: 25 janv. 2017

DOI: https://doi.org/10.1515/msr-2017-0002

Mots clésTorsional pendulum, calibration, measurement uncertainty evaluation

© 2017 Leonard Klaus, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
Torsional pendulum, calibration, measurement uncertainty evaluation