<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The research described in this article was carried out for the purpose of developing a quantitative marker for defining the average edge chipping rate of milled granite surfaces and for testing and proving whether this quantitative marker can effectively be applied. Another aim of the research was to test the applicability of the developed measurement method and the precision of the body representing the volume loss caused by chipping. The surface edges of the milled specimens were digitised using a laser scanner and chipped volumes were defined on the basis of a body generated with the help of a point cloud, and then the errors of the volumes produced by the evaluation-purpose software were examined using a digital microscope. The investigations proved that the proposed measurement method is accurate and that the replacement body defined through measurements appropriately approximates the volume of chippings in the case of milled granite surfaces.</p></abstract>

The research described in this article was carried out for the purpose of developing a quantitative marker for defining the average edge chipping rate of milled granite surfaces and for testing and proving whether this quantitative marker can effectively be applied. Another aim of the research was to test the applicability of the developed measurement method and the precision of the body representing the volume loss caused by chipping. The surface edges of the milled specimens were digitised using a laser scanner and chipped volumes were defined on the basis of a body generated with the help of a point cloud, and then the errors of the volumes produced by the evaluation-purpose software were examined using a digital microscope. The investigations proved that the proposed measurement method is accurate and that the replacement body defined through measurements appropriately approximates the volume of chippings in the case of milled granite surfaces.

Examination of the Average Chipping Rate on the Edges of Milled Granite Surfaces

Department on Manufacturing Science and Technology, Budapest University of Technology and Economics, 3 Muegyetem rakpart, H-1111, Budapest, Hungary

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Examination of the Average Chipping Rate on the Edges of Milled Granite Surfaces"}

The research described in this article was carried out for the purpose of developing a quantitative marker for defining the average edge chipping rate of...

Examination of the Average Chipping Rate on the Edges of Milled Granite Surfaces

Publié en ligne: 11 mars 2015

Pages: 1 - 8

Reçu: 04 sept. 2014

Accepté: 24 janv. 2015

DOI: https://doi.org/10.1515/msr-2015-0001

Mots clés
Granite, qualification, quantitative marker, edge chippings, milling

© István Gábor Gyurika, Tibor Szalay

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Examination of the Average Chipping Rate on the Edges of Milled Granite Surfaces

Publié en ligne: 11 mars 2015

Pages: 1 - 8

Reçu: 04 sept. 2014

Accepté: 24 janv. 2015

DOI: https://doi.org/10.1515/msr-2015-0001

Mots clésGranite, qualification, quantitative marker, edge chippings, milling

© István Gábor Gyurika, Tibor Szalay

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
Granite, qualification, quantitative marker, edge chippings, milling