<abstract xmlns="http://www.w3.org/1999/xhtml"><p> Synthesis of indium tin oxide (ITO) nanoparticles by reflux method without chlorine contamination at different pHs, temperatures, solvents and concentrations has been studied. Indium chloride, tin chloride, water, ethanol and Triton X-100 were used as starting materials. Structure, size, surface morphology and transparency of indium tin oxide nanoparticles were studied by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and UV-Vis spectrophotometry. XRD patterns showed that 400 °C is the lowest temperature for synthesis of ITO nanoparticles because metal hydroxide does not transform to metal oxide in lower temperature. FT-IR results showed the transformation of hydroxyl groups to oxide. SEM images showed that pH is the most important factor affecting the nanoparticles size. The smallest nanoparticles (40 nm) were obtained at pH = 8.8. The size of crystallites was decreased by lowering of concentration (0.025 M). </p></abstract>

Synthesis of indium tin oxide (ITO) nanoparticles by reflux method without chlorine contamination at different pHs, temperatures, solvents and concentrations has been studied. Indium chloride, tin chloride, water, ethanol and Triton X-100 were used as starting materials. Structure, size, surface morphology and transparency of indium tin oxide nanoparticles were studied by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and UV-Vis spectrophotometry. XRD patterns showed that 400 °C is the lowest temperature for synthesis of ITO nanoparticles because metal hydroxide does not transform to metal oxide in lower temperature. FT-IR results showed the transformation of hydroxyl groups to oxide. SEM images showed that pH is the most important factor affecting the nanoparticles size. The smallest nanoparticles (40 nm) were obtained at pH = 8.8. The size of crystallites was decreased by lowering of concentration (0.025 M).

Synthesis and characterization of indium tin oxide nanoparticles via reflux method

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Synthesis of indium tin oxide (ITO) nanoparticles by reflux method without chlorine contamination at different pHs, temperatures, solvents and concentrations...

Synthesis and characterization of indium tin oxide nanoparticles via reflux method

Publié en ligne: 21 mars 2018

Pages: 799 - 805

Reçu: 05 mars 2017

Accepté: 22 janv. 2018

DOI: https://doi.org/10.1515/msp-2018-0008

Mots clés
reflux method, indium tin oxide, resistivity, transparency

© 2018

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Synthesis and characterization of indium tin oxide nanoparticles via reflux method

Publié en ligne: 21 mars 2018

Pages: 799 - 805

Reçu: 05 mars 2017

Accepté: 22 janv. 2018

DOI: https://doi.org/10.1515/msp-2018-0008

Mots clésreflux method, indium tin oxide, resistivity, transparency

© 2018

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
reflux method, indium tin oxide, resistivity, transparency