<abstract xmlns="http://www.w3.org/1999/xhtml"><p> This article was focused on the evaluation of neutral salt spray test effect (according to ISO 9124), procedure E4, on mechanical properties of load-bearing adhesive joints. The study also comprises the influence of substrate material (mild steel, aluminum alloys) and substrate surface roughness (verified by optical confocal microscopy). The experimental program contained acrylate-based adhesive and hybrid silicone polyurethane based adhesive which were applied in double lap joints loaded by shear.</p></abstract>

This article was focused on the evaluation of neutral salt spray test effect (according to ISO 9124), procedure E4, on mechanical properties of load-bearing adhesive joints. The study also comprises the influence of substrate material (mild steel, aluminum alloys) and substrate surface roughness (verified by optical confocal microscopy). The experimental program contained acrylate-based adhesive and hybrid silicone polyurethane based adhesive which were applied in double lap joints loaded by shear.

Influence of the adhesive type and metal substrate on adhesion of bonded joints after salt spray test

KOM – Corrosion and Material Protection Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

This article was focused on the evaluation of neutral salt spray test effect (according to ISO 9124), procedure E4, on mechanical properties of load-bearing...

Influence of the adhesive type and metal substrate on adhesion of bonded joints after salt spray test

Publié en ligne: 12 juin 2018

Pages: 54 - 64

DOI: https://doi.org/10.1515/kom-2018-0006

© 2018 Klara Machalická, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.