<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The clearance of unexploded ordnance (UXO) and other explosive remnants of war (ERW) containing shaped charge warheads poses a particular technical hazard to consider for explosive ordnance disposal (EOD) personnel. The wide use of light anti-tank weapons, such as rocket propelled grenades and the scattering of sub-munitions in different conflict areas have made the clearance of shaped charge ammunition a frequent task. However, unlike other hazards, for shaped charges, EOD personnel lack adequate means for the establishment of the maximum hazardous area and for the design of measures for hazard confinement against the shaped charge effect.</p><p>In this article two different models are suggested, which together give guidance for protective measures during clearance of shaped charge ammunition. The development of these models is based on their military utility, by consideration of the limited information availability, the short time frames, the working methods and the technology level that are characteristic for EOD operations. The two suggested models are developed further into a complete set of design rules for protective measures, giving a versatile tool to replace today´s rough estimates and guesswork, in these safety-related decisions. </p></abstract>

The clearance of unexploded ordnance (UXO) and other explosive remnants of war (ERW) containing shaped charge warheads poses a particular technical hazard to consider for explosive ordnance disposal (EOD) personnel. The wide use of light anti-tank weapons, such as rocket propelled grenades and the scattering of sub-munitions in different conflict areas have made the clearance of shaped charge ammunition a frequent task. However, unlike other hazards, for shaped charges, EOD personnel lack adequate means for the establishment of the maximum hazardous area and for the design of measures for hazard confinement against the shaped charge effect.In this article two different models are suggested, which together give guidance for protective measures during clearance of shaped charge ammunition. The development of these models is based on their military utility, by consideration of the limited information availability, the short time frames, the working methods and the technology level that are characteristic for EOD operations. The two suggested models are developed further into a complete set of design rules for protective measures, giving a versatile tool to replace today´s rough estimates and guesswork, in these safety-related decisions.

Shaped Charge Calculation Models for Explosive Ordnance Disposal Operations

Army Major (OF-3), Swedish Explosive Ordnance Disposal and Demining Centre (SWEDEC),

Professor Em(eritus), National Defence College,

Journal of Military Studies

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Shaped Charge Calculation Models for Explosive Ordnance Disposal Operations"}

The clearance of unexploded ordnance (UXO) and other explosive remnants of war (ERW) containing shaped charge warheads poses a particular technical hazard to...

Shaped Charge Calculation Models for Explosive Ordnance Disposal Operations

Publié en ligne: 23 nov. 2016

Pages: 55 - 78

DOI: https://doi.org/10.1515/jms-2016-0183

Mots clés
shaped charge, jet penetration depth, hazardous area, explosive ordnance disposal, protective measures

© 2016

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Shaped Charge Calculation Models for Explosive Ordnance Disposal Operations

Publié en ligne: 23 nov. 2016

Pages: 55 - 78

DOI: https://doi.org/10.1515/jms-2016-0183

Mots clésshaped charge, jet penetration depth, hazardous area, explosive ordnance disposal, protective measures

© 2016

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
shaped charge, jet penetration depth, hazardous area, explosive ordnance disposal, protective measures