Analysis of the highway tunnels monitoring using an optical fiber implemented into primary lining

[1] P. Lunardi, Design and Construction of Tunnels, 1st ed. Berlin Heidelberg: Springer-Verlag Berlin Heidelberg, 2008.Search in Google Scholar

[2] L. Uotinen, “Design of Shotcrete Rock Reinforcement Hard Rock according to Eurocode”, Seminar on Geoengineering, Espoo, Finland, 2011.Search in Google Scholar

[3] G. C. Cho, J. H. Lee, K. I. Song and S. R. Lee, Proceedings of the World Tunnel Congress, 2007.Search in Google Scholar

[4] J. Singer, H. Grafinger and K. Thuro, “Monitoring the Deformation of a Temporary Top Heading Invert using Time Domain Reflectometry”, Geomech. und Tunnelbau, vol. 2, no. 3, pp. 238–249, 2009.10.1002/geot.200900023Search in Google Scholar

[5] R. Farrell, R. Mair, A. Sciotti and A. Pigorini, “Building Response to Tunnelling”, Soils Found., vol. 54, no. 3, pp. 269–279, 2014.10.1016/j.sandf.2014.04.003Open DOISearch in Google Scholar

[6] Z. Sikora and R. Ossowski, “Geotechnical Aspects of Dike Construction using Soil-Ash Composites”, Procedia Engineering, 2013, vol. 57, pp. 1029–1035.10.1016/j.proeng.2013.04.130Search in Google Scholar

[7] E. Hrubesova, L. Duris, A. Melichar and M. Jaafar, “Determination of Tunnel Face Stabilizing Pressure using Numerical and Analytical Methods”, Advances and Trends Engineering Sciences and Technologies II - Proceedings of the 2nd International Conference on Engineering Sciences and Technologies, ESaT 2016, 2017, pp. 767–772.10.1201/9781315393827-130Search in Google Scholar

[8] E. Hrubesova, H. Lahuta, L. Duris and M. Jaafar, “Mathematical Modeling of Foundation-Subsoil Interaction”, International Multidisciplinary Scientific Geo Conference Surveying Geology and Mining Ecology Management, SGEM, 2015, vol. 2, no. 1, pp. 437–444.Search in Google Scholar

[9] S. Argyroudis, A. M. Kaynia and K. Pitilakis, “Development of Fragility Functions for Geotechnical Constructions: Application to Cantilever Retaining Walls”, Soil Dyn. Earthq. Eng., vol. 50, pp. 106–116, 2013.10.1016/j.soildyn.2013.02.014Search in Google Scholar

[10] A. F. Cabalar, A. Cevik and C. Gokceoglu, “Some Applications of Adaptive Neuro-Fuzzy Inference System (ANFIS) Geotechnical Engineering”, Comput. Geotech., vol. 40, pp. 14–33, 2012.10.1016/j.compgeo.2011.09.008Search in Google Scholar

[11] C. Kolat, R. Ulusay and M. L. Suzen, “Development of Geotechnical Microzonation Model for Yenisehir (Bursa, Turkey) Located at a Seismically Active Region”, Eng. Geol., vol. 127, pp. 36–53, 2012.10.1016/j.enggeo.2011.12.014Search in Google Scholar

[12] H. S. Kim, G. C. Cho, J. Y. Lee, and S. J. Kim, “Geotechnical and Geophysical Properties of Deep Marine Fine-Grained Sediments Recovered during the Second Ulleung Basin Gas Hydrate Expedition, East Sea, Korea”, Mar. Pet. Geol., vol. 47, pp. 56–65, 2013.10.1016/j.marpetgeo.2013.05.009Search in Google Scholar

[13] F. Shaaban, A. Ismail, U. Massoud, H. Mesbah, A. Lethy and A. M. Abbas, “Geotechnical Assessment of Ground Conditions Around a Tilted Building Cairo, Egypt using Geophysical Approaches”, Arab. J. Geosci., vol. 6, no. 12, pp. 4961–4972, 2013.Search in Google Scholar

[14] S. Jia, Y. Zhao and C. Zou, “Numerical Solution to Identification Problems of Material Parameters Geotechnical Engineering”, Procedia Engineering, 2012, vol. 28, pp. 61–65.10.1016/j.proeng.2012.01.683Search in Google Scholar

[15] I. Papaioannou and D. Straub, “Reliability Updating Geotechnical Engineering Including Spatial Variability of Soil”, Comput. Geotech., vol. 42, pp. 44–51, 2012.10.1016/j.compgeo.2011.12.004Open DOISearch in Google Scholar

[16] M. Ghorbani, M. Sharifzadeh, S. Yasrobi and D. M. aiyan, “Geotechnical, Structural and Geodetic Measurements for Conventional Tunnelling Hazards Urban Areas – the Case of Niayesh Road Tunnel Project”, Tunn. Undergr. Sp. Technol., vol. 31, pp. 1–8, 2012.10.1016/j.tust.2012.02.009Search in Google Scholar

[17] M. Al-Mukhtar, S. Khattab and J.-F. Alcover, “Microstructure and Geotechnical Properties of Lime-Treated Expansive Clayey Soil”, Eng. Geol., vol. 139-140, pp. 17–27, 2012.10.1016/j.enggeo.2012.04.004Search in Google Scholar

[18] G. Song, W. Li, B. Wang and S. C. M. Ho, “A Review of Rock Bolt Monitoring using Smart Sensors”, vol. 17, no. 4. MDPI AG, 05-Apr-2017.10.3390/s17040776Search in Google Scholar

[19] S. C. M. Ho, W. Li, B. Wang and G. Song, “A Load Measuring Anchor Plate for Rock Bolt using Fiber Optic Sensor”, vol. 26, no. 5, April 2017.10.1088/1361-665X/aa6ae8Search in Google Scholar

[20] T. M. Do and Y. S. Kim, “Prediction of Load Transfer Depth for Cost-Effective Design of Ground Anchors using FBG Sensors Embedded Tendon and Numerical Analysis”, vol. 10, no. 6, pp. 737–755, June 2016.10.12989/gae.2016.10.6.737Search in Google Scholar

[21] W. Moorman, L. Taerwe, W. De Waele, J. Degrieck, and J. Himpe, “Measuring Ground Anchor Forces of a Quay Wall with Bragg Sensors”, vol. 131, no. 2, pp. 322–328, February 2005.10.1061/(ASCE)0733-9445(2005)131:2(322)Search in Google Scholar

[22] M. Schroeck, W. Ecke, and A. Graupner, “Strain Monitoring Steel Rock Bolts using FBG Sensor Arrays”, vol. 4074, pp. 298–304, 2000.Search in Google Scholar

[23] X. Weng, H. Ma, and J. Wang, “Stress Monitoring for Anchor Rods System Subway Tunnel using FBG Technology”, vol. 2015, 1.2.2015.10.1155/2015/480184Search in Google Scholar

[24] S. Li, J. Ma, and J. Hu, “Rockfall hazard alarm strategy based on FBG smart passive net structure”, vol. 5, no. 1, pp. 19–23, Mar 2015.10.1007/s13320-014-0203-2Search in Google Scholar

[25] Q. Jiang, Q. M. Sui, Q. S. Zhang, and X. Z. Cui, “Technology Study of Optical Fiber Bragg Grating Anchor Bar Sensor Tunnel Strain Monitoring”, vol. 27, SUPPL., pp. 315–318, Oct 2006.Search in Google Scholar

[26] Y. Guan et al “Monitoring Research of Fiber Bragg Grating Strain Sensors Embedded Tunnel Secondary Lining”, Guangxue Jishu/Optical Tech., vol. 40, no. 6, pp. 547–550, 2014.10.3788/GXJS20144006.0547Search in Google Scholar

[27] T. Nishino, “Measurement of Tunnel-Ceiling and Side-Wall Displacements using Arc-Shaped Beam and Fiber Bragg Grating Sensors Hiroshi Naruse, Shinya Furukaw1”, 2012, vol. 8421.Search in Google Scholar

[28] M. Fajkus et al “Mathematical Model of Optimized Design of Multi-Point Sensoric Measurement with Bragg Gratings using Wavelength Divison Multiplex”, Proceedings of SPIE – The International Society for Optical Engineering, 2016, vol. 9889.10.1117/12.2239551Search in Google Scholar

[29] M. Fajkus et al “Capacity of Wavelength and Time Division Multiplexing for Quasi-Distributed Measurement using Fiber Bragg Gratings”, Adv. Electr. Electron. Eng., vol. 13, no. 5, 2015.10.15598/aeee.v13i5.1508Search in Google Scholar

[30] M. Papes et al “Concrete Deflection Measurement using Fiber Optic Distributed Strain System”, Proceedings of SPIE – The International Society for Optical Engineering, 2015, vol. 9659.10.1117/12.2196203Search in Google Scholar

[31] M. Fajkus et al “Effect of the Geometric Deformations on the Brillouin Scattering the Standard Single-Mode Optical Fiber”, Proceedings of SPIE – The International Society for Optical Engineering, 2016, vol. 9889.10.1117/12.2239550Search in Google Scholar

[32] M. Fajkus, J. Nedoma, L. Bednarek, J. Frnda and V. Vasinek, “Analysis of the Applicability of Singlemode Optical Fibers for Measurement of Deformation with Distributed Systems BOTDR“ Adv. Electr. Electron. Eng., vol. 14, no. 4Special, 2016.10.15598/aeee.v14i4.1785Search in Google Scholar

[33] F. Wang, H. Huang, D. Zhang, W. Zhang and R. Xu, “Deformation Sensing Mehod of Shield Tunnel based on Optical Fiber Sensing Technology of BOTDA”, vol. 32, no. 9, pp. 1901–1908, Sep 2013.Search in Google Scholar

[34] S. Song, Z. Wu, C. Yang, C. Wan and S. Shen, “Deformation Monitoring of Shield Tunnel based on Distributed Optical Fiber Strain Sensing Technology”, 2011, vol. 2, pp. 2058–2066.Search in Google Scholar

[35] H. T. Qiu, C. Li, H. L. Cui, D. Zhang and Y. Ding, “Stain Monitoring for Tunnel using Distributed Optical Fiber BOTDR Sensors”, 2008, pp. 27–30.10.1201/9780203883204.ch6Search in Google Scholar

[36] R. A. Mo at, J. F. Beltran and R. Herrera “Applications of BOTDR Fiber Optics to the Monitoring of Underground Structures”, vol. 9, no. 3, pp. 397–414, Sep 2015.10.12989/gae.2015.9.3.397Search in Google Scholar

[37] B. Shi et al “Study on BOTDR-based Distributed Optical Fiber Strain Measurement for Tunnel Health Diagnosis”, vol. 24, no. 15, pp. 2622–2628, Aug 2005.Search in Google Scholar

[38] J. Ching and K.-K. Phoon, “Quantile Value Method versus Design Value Method for Calibration of Reliability-Based Geotechnical Codes”, Struct. Saf., vol. 44, pp. 47–58, 2013.10.1016/j.strusafe.2013.04.003Search in Google Scholar

[39] M. Ghayoomi, S. Dashti and J. S. McCartney, “Performance of a Transparent Flexible Shear Beam Container for Geotechnical Centrifuge Modeling of Dynamic Problems”, Soil Dyn. Earthq. Eng., vol. 53, pp. 230–239, 2013.10.1016/j.soildyn.2013.07.007Search in Google Scholar

[40] C. H. Juang and L. Wang, “Reliability-Based Robust Geotechnical Design of Spread Foundations using Multi-Objective Genetic Algorithm”, Comput. Geotech., vol. 48, pp. 96–106, 2013.10.1016/j.compgeo.2012.10.003Open DOISearch in Google Scholar

[41] T. Horiguchi, K. Shimizu, T. Kurashima, M. Tateda and Y. Koyamada, “Development of a Distributed Sensing Technique using Brillouin Scattering”, Journal of Lightwave Technology, vol. 13, no. 7, pp. 1296–1302, July 1995.10.1109/50.400684Open DOISearch in Google Scholar

[42] Z. Xiaofei, H. Wenjie, Z. Qing, S. Yanxin, M. Xianwei and H. Yongwen, “Development of Optical Fiber Strain Monitoring System based on BOTDR”, IEEE 2011 10th International Conference on Electronic Measurement Instruments, 2011, vol. 4, pp. 38–41.Search in Google Scholar