<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This paper presents a new high speed induction motor drive based on the core advantage of field orientation control (FOC) and hysteresis current comparison (HCC). A complete closed loop speed-controlled induction motor drive system is developed consisting of an outer speed and an inner HCC algorithm which are optimised to obtain fast and stable speed response with effective current and torque tracking, both during transient and steady states. The developed model, being speed-controlled, was examined with step and ramp speed references and excellent performances obtained under full load stress. A speed response comparison of the model with the standard AC3 (Field-Oriented Control Induction Motor Drive) of MATLAB Simpower systems shows that the model achieved a rise time of 0.0762 seconds compared to 0.2930 seconds achieved by the AC3. Also, a settle time of 0.0775 seconds was obtained with the developed model while that of the AC3 model is 0.2986 seconds confirming, therefore, the superiority of the developed model over the AC3 model which, hitherto, served as a reference standard.</p></abstract>

This paper presents a new high speed induction motor drive based on the core advantage of field orientation control (FOC) and hysteresis current comparison (HCC). A complete closed loop speed-controlled induction motor drive system is developed consisting of an outer speed and an inner HCC algorithm which are optimised to obtain fast and stable speed response with effective current and torque tracking, both during transient and steady states. The developed model, being speed-controlled, was examined with step and ramp speed references and excellent performances obtained under full load stress. A speed response comparison of the model with the standard AC3 (Field-Oriented Control Induction Motor Drive) of MATLAB Simpower systems shows that the model achieved a rise time of 0.0762 seconds compared to 0.2930 seconds achieved by the AC3. Also, a settle time of 0.0775 seconds was obtained with the developed model while that of the AC3 model is 0.2986 seconds confirming, therefore, the superiority of the developed model over the AC3 model which, hitherto, served as a reference standard.

A New High Speed Induction Motor Drive based on Field Orientation and Hysteresis Current Comparison

Department of Electrical Engineering, University of Nigeria, Nsukka,

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

This paper presents a new high speed induction motor drive based on the core advantage of field orientation control (FOC) and hysteresis current comparison...

A New High Speed Induction Motor Drive based on Field Orientation and Hysteresis Current Comparison

Publié en ligne: 02 nov. 2016

Pages: 334 - 342

Reçu: 20 avr. 2016

DOI: https://doi.org/10.1515/jee-2016-0048

Mots clés
induction motor drive, hysteresis current control, field orientation, vector control

© 2016 Faculty of Electrical Engineering and Information Technology, Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

A New High Speed Induction Motor Drive based on Field Orientation and Hysteresis Current Comparison

Publié en ligne: 02 nov. 2016

Pages: 334 - 342

Reçu: 20 avr. 2016

DOI: https://doi.org/10.1515/jee-2016-0048

Mots clésinduction motor drive, hysteresis current control, field orientation, vector control

© 2016 Faculty of Electrical Engineering and Information Technology, Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
induction motor drive, hysteresis current control, field orientation, vector control