<abstract xmlns="http://www.w3.org/1999/xhtml"> Performance of organic light-emitting diodes was investigated depending on the electron-injection materials of metal carbonates (Li2CO3 and Cs2CO3 ); and number of layers. In order to improve the device efficiency, two types of devices were manufactured by using the hole-injection material (Teflon-amorphous fluoropolymer -AF) and electron-injection materials; one is a two-layer reference device ( ITO/Teflon-AF/Alq3/Al ) and the other is a three-layer device (ITO/Teflon-AF/Alq3/metal carbonate/Al). From the results of the efficiency for the devices with hole-injection layer and electron-injection layer, it was found that the electron-injection layer affects the electrical properties of the device more than the hole-injection layer. The external-quantum efficiency for the three-layer device with Li2CO3 and Cs2CO3 layer is improved by approximately six and eight times, respectively, compared with that of the two-layer reference device. It is thought that a use of electron-injection layer increases recombination rate of charge carriers by the active injection of electrons and the blocking of holes.</abstract>

Performance of organic light-emitting diodes was investigated depending on the electron-injection materials of metal carbonates (Li2CO3 and Cs2CO3 ); and number of layers. In order to improve the device efficiency, two types of devices were manufactured by using the hole-injection material (Teflon-amorphous fluoropolymer -AF) and electron-injection materials; one is a two-layer reference device ( ITO/Teflon-AF/Alq3/Al ) and the other is a three-layer device (ITO/Teflon-AF/Alq3/metal carbonate/Al). From the results of the efficiency for the devices with hole-injection layer and electron-injection layer, it was found that the electron-injection layer affects the electrical properties of the device more than the hole-injection layer. The external-quantum efficiency for the three-layer device with Li2CO3 and Cs2CO3 layer is improved by approximately six and eight times, respectively, compared with that of the two-layer reference device. It is thought that a use of electron-injection layer increases recombination rate of charge carriers by the active injection of electrons and the blocking of holes.

Performance Enhancement of Organic Light–Emitting Diodes Using Electron–Injection Materials of Metal Carbonates

Department of Car Mechatronics, Sahmyook University, Seoul 139-742, Korea

Department of Physics, Hongik University, Seoul 121-791, Korea

Department of Electrical Engineering, Kwangwoon University, Seoul 139-701, Korea

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Performance of organic light-emitting diodes was investigated depending on the electron-injection materials of metal carbonates (Li2CO3 and Cs2CO3 ); and...

Performance Enhancement of Organic Light–Emitting Diodes Using Electron–Injection Materials of Metal Carbonates

Publié en ligne: 28 juin 2016

Pages: 222 - 226

Reçu: 15 janv. 2016

DOI: https://doi.org/10.1515/jee-2016-0032

Mots clés
organic light-emitting diodes, electron-injection materials, metal carbonates, Li2CO3, Cs2CO3

© Faculty of Electrical Engineering and Information Technology, Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Performance Enhancement of Organic Light–Emitting Diodes Using Electron–Injection Materials of Metal Carbonates

Publié en ligne: 28 juin 2016

Pages: 222 - 226

Reçu: 15 janv. 2016

DOI: https://doi.org/10.1515/jee-2016-0032

Mots clésorganic light-emitting diodes, electron-injection materials, metal carbonates, Li2CO3, Cs2CO3

© Faculty of Electrical Engineering and Information Technology, Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
organic light-emitting diodes, electron-injection materials, metal carbonates, Li2CO3, Cs2CO3