<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The study investigates the behaviour of an electrical interface incorporated in a MR damper-based vibration reduction system powered with energy recovered from vibration. The interface, comprising the R, L and C elements, is connected in between the coil in an electromagnetic electric generator and the control coil in the MR damper and its function is to convert the output voltage from the generator. The interface model was formulated and computer simulations were performed to find out how the parameters of the interface should influence the frequency responses of the vibration reduction system.</p></abstract>

The study investigates the behaviour of an electrical interface incorporated in a MR damper-based vibration reduction system powered with energy recovered from vibration. The interface, comprising the R, L and C elements, is connected in between the coil in an electromagnetic electric generator and the control coil in the MR damper and its function is to convert the output voltage from the generator. The interface model was formulated and computer simulations were performed to find out how the parameters of the interface should influence the frequency responses of the vibration reduction system.

Electrical Interface for a Self-Powered MR Damper-Based Vibration Reduction System

Mechanical Engineering and Robotics, Department of Process Control, University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The study investigates the behaviour of an electrical interface incorporated in a MR damper-based vibration reduction system powered with energy recovered from...

Electrical Interface for a Self-Powered MR Damper-Based Vibration Reduction System

Publié en ligne: 06 août 2016

Pages: 165 - 172

Reçu: 31 mars 2016

Accepté: 11 juil. 2016

DOI: https://doi.org/10.1515/ama-2016-0025

Mots clés
vibration, electrical interface, MR damper, energy harvesting

© 2016 Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Electrical Interface for a Self-Powered MR Damper-Based Vibration Reduction System

Publié en ligne: 06 août 2016

Pages: 165 - 172

Reçu: 31 mars 2016

Accepté: 11 juil. 2016

DOI: https://doi.org/10.1515/ama-2016-0025

Mots clésvibration, electrical interface, MR damper, energy harvesting

© 2016 Bialystok University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
vibration, electrical interface, MR damper, energy harvesting