<abstract xmlns="http://www.w3.org/1999/xhtml">This paper presents research on the impact of printing speed on the strength of a manufactured object and is the next stage of the author's research on the impact of technological parameters of 3D printing on the strength of printed models. The tested universal specimens were printed using the FDM (Fused Deposition Modeling) method from PLA (polylactic acid, polylactide). The paper presents the maximum breaking force of the samples and the time of printing samples depending on the printing speed, which varied from 20 mm·s−1 to 100 mm·s−1. The research indicates that the strength of samples decreases with increasing speed. In the range of 50-80 mm·s−1, the strength of the specimens remined at a similar level, however, above 80 mm·s−1, it decreased significantly.</abstract>

This paper presents research on the impact of printing speed on the strength of a manufactured object and is the next stage of the author's research on the impact of technological parameters of 3D printing on the strength of printed models. The tested universal specimens were printed using the FDM (Fused Deposition Modeling) method from PLA (polylactic acid, polylactide). The paper presents the maximum breaking force of the samples and the time of printing samples depending on the printing speed, which varied from 20 mm·s−1 to 100 mm·s−1. The research indicates that the strength of samples decreases with increasing speed. In the range of 50-80 mm·s−1, the strength of the specimens remined at a similar level, however, above 80 mm·s−1, it decreased significantly.

Impact of Print Speed on Strength of Samples Printed in FDM Technology

Department of Mechanical Engineering and Fundamentals of Machine Design

University of Warmia and Mazury in Olsztyn

Agricultural Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Impact of Print Speed on Strength of Samples Printed in FDM Technology"}

This paper presents research on the impact of printing speed on the strength of a manufactured object and is the next stage of the author's research on the...

Impact of Print Speed on Strength of Samples Printed in FDM Technology

Publié en ligne: 09 sept. 2019

Pages: 33 - 38

Reçu: 01 avr. 2019

Accepté: 01 juin 2019

DOI: https://doi.org/10.1515/agriceng-2019-0014

Mots clés
material engineering, rapid prototyping, 3D printing, PLA, FDM

© 2019 Łukasz Miazio, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Impact of Print Speed on Strength of Samples Printed in FDM Technology

Publié en ligne: 09 sept. 2019

Pages: 33 - 38

Reçu: 01 avr. 2019

Accepté: 01 juin 2019

DOI: https://doi.org/10.1515/agriceng-2019-0014

Mots clésmaterial engineering, rapid prototyping, 3D printing, PLA, FDM

© 2019 Łukasz Miazio, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
material engineering, rapid prototyping, 3D printing, PLA, FDM