<abstract xmlns="http://www.w3.org/1999/xhtml">Electrical conductivity of NaF-AlF3 melts with an addition of 2 wt % Al2O3 and/or 5 wt % CaF2 was measured using a pyrolytic boron nitride tube-type cell with a constant distance of electrodes. The molar cryolite ratios MR = n(NaF)/n(AlF3) were 1.8 and 1.6, and the temperature was varied from 865 °C to 1005 °C. <italic>Ac-</italic>techniques with a sine wave signal with small amplitude in the high frequency range were applied. Electrolyte resistance was obtained from nonlinear regression analysis according to equivalent circuit. Experimental data were used to describe the dependence of the electrical conductivity in fluoride melts with lower temperature on the amount of various additions and temperature.</abstract>

Electrical conductivity of NaF-AlF3 melts with an addition of 2 wt % Al2O3 and/or 5 wt % CaF2 was measured using a pyrolytic boron nitride tube-type cell with a constant distance of electrodes. The molar cryolite ratios MR = n(NaF)/n(AlF3) were 1.8 and 1.6, and the temperature was varied from 865 °C to 1005 °C. Ac-techniques with a sine wave signal with small amplitude in the high frequency range were applied. Electrolyte resistance was obtained from nonlinear regression analysis according to equivalent circuit. Experimental data were used to describe the dependence of the electrical conductivity in fluoride melts with lower temperature on the amount of various additions and temperature.

Electrical conductivity of molten fluoride-oxide melts with high addition of aluminium fluoride

Institute of Inorganic Chemistry, Technology and Materials, Faculty of Chemical and Food Technology STU in Bratislava, Radlinského 9, 812 37 Bratislava,

Acta Chimica Slovaca

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Electrical conductivity of NaF-AlF3 melts with an addition of 2 wt % Al2O3 and/or 5 wt % CaF2 was measured using a pyrolytic boron nitride tube-type cell with...

Electrical conductivity of molten fluoride-oxide melts with high addition of aluminium fluoride

Publié en ligne: 08 déc. 2016

Pages: 141 - 145

DOI: https://doi.org/10.1515/acs-2016-0024

Mots clés
electrical conductivity, cryolite based melts, boron nitride, tube-type cell

© 2016 Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Electrical conductivity of molten fluoride-oxide melts with high addition of aluminium fluoride

Publié en ligne: 08 déc. 2016

Pages: 141 - 145

DOI: https://doi.org/10.1515/acs-2016-0024

Mots cléselectrical conductivity, cryolite based melts, boron nitride, tube-type cell

© 2016 Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
electrical conductivity, cryolite based melts, boron nitride, tube-type cell