Accès libre

Patterns of Acoustic Emission Changes with Alterations in the Damage Area of a Composite Material According to the Mises Criterion

Sergii Filonenko

Sergii Filonenko

Department of Computerized Electrical Systems and Technologies, National Aviation UniversityKyiv, Ukraine
Recherchez cet auteur sur
Sciendo|Google Scholar
Filonenko, Sergii
 et 
Anzhelika Stakhova

Anzhelika Stakhova

Department of Structural Mechanics, Slovak University of Technology in BratislavaBratislava, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Stakhova, Anzhelika
  
26 juin 2025
Patterns of Acoustic Emission Changes with Alterations in the Damage Area of a Composite Material According to the Mises Criterion's Cover Image
À propos de cet article
Article précédent
Article suivant
Citez
Télécharger la couverture
Publié en ligne: 26 juin 2025
Pages: 50 - 58
Reçu: 02 août 2024
Accepté: 01 déc. 2024
DOI: https://doi.org/10.14313/jamris-2025-014
Mots clés
© 2025 Sergii Filonenko et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Figure 1.

Dependence in the variation of equivalent stress over time, according to expression (1), during the failure of CM based on the Mises criterion. The deformation rate is set to α˜=20
Dependence in the variation of equivalent stress over time, according to expression (1), during the failure of CM based on the Mises criterion. The deformation rate is set to α˜=20

Figure 2.

Graphs of the variation in AE signal amplitudes over time in relative units during the failure of CM under transverse force, based on the Mises criterion, with varying numbers of CM elements. Simulation parameter values: v˜0=100000 ; α˜=20 ; r˜=10000 ;t˜0=0.0001 . Number of CM elements: 1 − N0; 2 − 2 · N0; 3 − 3 · N0; 4 − 4 · N0; 5 − 5 · N0
Graphs of the variation in AE signal amplitudes over time in relative units during the failure of CM under transverse force, based on the Mises criterion, with varying numbers of CM elements. Simulation parameter values: v˜0=100000 ; α˜=20 ; r˜=10000 ;t˜0=0.0001 . Number of CM elements: 1 − N0; 2 − 2 · N0; 3 − 3 · N0; 4 − 4 · N0; 5 − 5 · N0

Figure 3.

Dependencies of the maximum amplitude of the AE signal (a) and the duration of the AE signal (b) on the increasing damage area (number of elements) in CM under transverse force, based on the Mises criterion
Dependencies of the maximum amplitude of the AE signal (a) and the duration of the AE signal (b) on the increasing damage area (number of elements) in CM under transverse force, based on the Mises criterion

Figure 4.

Dependence of the area under the AE signal curve on increasing damage area (number of elements) in CM under transverse force based on the Mises criterion
Dependence of the area under the AE signal curve on increasing damage area (number of elements) in CM under transverse force based on the Mises criterion

Figure 5.

Dependencies of the percentage increase in maximum amplitude (1), area under the signal curve (2), and duration (3) of the AE signal on the increasing number of elements (damage area) in CM
Dependencies of the percentage increase in maximum amplitude (1), area under the signal curve (2), and duration (3) of the AE signal on the increasing number of elements (damage area) in CM
Langue:
Anglais
Périodicité:
4 fois par an
Sujets de la revue:
Informatique, Intelligence artificielle, Ingénierie, Ingénierie électrique, Ingénierie de contrôle, métrologie et essais, Génie mécanique, Fondamentaux du génie mécanique
RSS Feed de la revue