<abstract><title style='display:none'>Abstract</title>Dipole-dipole electrical resistivity tomographic method was applied to investigate the subsurface cavities at Staff Welfare Hospital &amp; School Quetta. A total of 890-meter profile line was covered along five smaller profile lines and fracture zones with maximum 21 meters interval. The cavity system along profile line-1 and 2 was very restricted and had no direct impact on infrastructure while major cavity beneath the building was traced at profile line-3 and line-4 thus constituting a ~20m wide cavity system with 3-4 small interconnected cavities between depths of 7 to 21 meters. This system was also traced at profile line-4 at a depth of 10 meters having a reduced width of 10m. At profile line-5, a few other cavities were detected that proved imperceptible due to limitations in data acquisition. To conclude, the cavity systems traced in profile line-3 and profile line-4 were the most perilous ones and are commonly the foremost reason for building collapse.</abstract>

Subsurface Cavity Detection Using Electrical Resistivity Tomography (Ert); A Case Study from Southern Quetta, Pakistan

<abstract><title style='display:none'>Abstract</title>Water is indispensable for human life and without water, life cannot exist on earth. Every person required 33 to 35-gallon water per day for drinking and demotic purpose. But due to lack of quality, inefficient water supply designs, intermixing of sewage water and unlined sewage water system, quality of water is deteriorated specially in recent decades and affecting a number of people. In present study, it was inevitable to design a water supply system for selected area to provide safe water supply design for a small community. For this purpose, a study area was selected named as chak.no. 253 RB, Samundri Road Faisalabad. The existing water supply system of the village was built 30 years ago with the problems of leaky pipes, mixing of sewerage water with drinking water was causing water-borne diseases like Diarrhea, Cholera, Giardiasis, Typhoid fever, Schistosomiasis. A computer software abbreviated as EPANET (Environment protection agency network) was used to design a water supply system of the area providing input parameters to the software. For this a profiling survey was conducted to determine the length of pipes and the elevation of each junction. The other input parameters such as the diameter of pipes, pipe network map, head losses were provided. Conclusively, EPANET gave a detailed water supply system plan for specific design period. By adopting this design provided by detailed surveys of the area and EPANET will help to control intermixing of sewage water which ultimately improves the quality of water. The new design is based on technology by using modern techniques (Software). It will provide save and continue supply of water to community. It will also reduce the cost of water billing, leakage, decrease the diseases rate and improve the life standard of people’s lives in that area.</abstract>

Water Supply Scheme System Design for Peri Urban Areas of Punjab using EPANET

<abstract><title style='display:none'>Abstract</title>The underground city beneath the Nevşehir Castle located in the middle of Cappadocia region in Turkey with approximately cone shape is investigated by jointly utilizing the modern geophysical techniques of seismic surface waves and electrical resistivity. The systematic void structure under the Nevşehir Castle of Cappadocia, which is known to have widespread underground cities, is studied by the use of 33 separate two-dimensional profiles ~4-km long where electrical resistivities and seismic surface waves are concurrently measured. Seismic surface wave measurements are inverted to establish the shear-wave velocity distribution while resistivity measurements are inverted to resolve the resistivity distribution. Several high-resistivity anomalies with a depth range 8-20 m point to a systematic void structure beneath the Nevşehir Castle. We were able to effectively isolate the void structure from the embedding structure since the currently employed resistivity instrument has provided us high resolution quality measurements. Associated with the high resistivity anomalies there exist low-velocity depth zones acquired from the surface wave inversions also pointing to a systematic void structure where three-dimensional visualization techniques are used to show the extension of the void structure under the studied area.</abstract>

Nevşehir Castle Region in Turkey Interpreted by the Use of Seismic Surface Wave and Electrical Resistance Measurements Together

<abstract><title style='display:none'>Abstract</title>Integrated well dataset and seismics delineated the PGS field onshore Niger Delta for reservoir identification. Gamma ray, resistivity, Neutron and density Logs identified four lithologies: sandstone, shaly sandstone, shaly sand and shale. They consist of sand-shale intercalation with the traces of shale sometimes found within the sand Formation. Petrophysical parameters of the reservoirs showed varying degree of lower density, low gamma ray, high porosity and resistivity response with prolific hydrocarbon reservoir G due to its shale volume and the clean sand mapped as a probable hydrocarbon reservoir. 3D seismic data located both seismic scale and sub-seismic scale structural and stratigraphic elements. Risk reduction in dry hole drilling due fault missing in conventional seismic attribute analysis and interpretation, have to be integrated into the Oil companies standard practice.</abstract>

Integration of Well Logs and Seismic Attribute Analysis in Reservoir Identification on PGS Field Onshore Niger Delta, Nigeria

<abstract><title style='display:none'>Abstract</title>This paper focuses on the review of electrical geophysical methods such as electrical resistivity and induced polarization as a technique for mineral exploration. It highlights the general fundamental principles of the electrical methods and result from other investigations. Most rock – forming minerals are insulators, and electrical current is carried through rocks mainly by the passage of ions in pore waters. In light of this, most rocks conduct electricity by electrolytic rather than electronic processes. Since metals and most metallic sulphides conduct electricity efficiently by the flow of electrons, electrical method is efficient and important in environmental investigation especially in areas where metallic objects are the targets and also in the search for sulphide ores. The results from various research showed the applicability of these geophysical ground methods, specially the Induce Polarization method, as a support tool in the identification and selection of exploration targets for test drilling.</abstract>

A Review of Electrical Methods as A Worthy Tool for Mineral Exploration

<abstract><title style='display:none'>Abstract</title>The present research describes a method of combining geostatistical analysis with geophysical inversion of electrical resistivity data conducted in Pakhli Plain, northwestern Himalayas, Pakistan. The raw data has been collected from the Technical Report VII-I on Ground Water Resources in Pakhli Plain, Mansehra District. Subsequently, the data has been deciphered and broadened from one dimensional resistivity data into a 2D model that can be entirely visualized and deduced in a spatial sense. Interpretation and calibration of the electrical resistivity curves with the lithologies and geophysical logs of boreholes suggests possible identification of distinctive sedimentary accumulations occurring within the Pakhli Plain. The 2D and 3D gridding and visualization is imperative to map the extents of the alluvial deposits within the Pakhli Plain formed during the periods of extreme tectonic activity. The coarser sediments are associated with lower levels of resistivity as measured in the electrical surveys, whereas the finer sediments exhibit characteristically lower resistivities. Therefore, the zones of low and high resistivity values are indicative of particles associated with coarser and finer sediments, respectively. It has been mentioned that the Pakhli Plain has remained a lacustrine zone during some time in the geological past as indicated by low resistivities representing finer sediments in the middle of the Plain. Consequently, the overall transmissivity of the sediments is low, which imply poor conditions for commercial groundwater production in the Pakhli Plain. Moreover, high resistivity zones of coarse material could be further investigated for groundwater potential areas. In particular, the prime objectives of the present study include 3D modeling of underground resistivity and its exploration in terms of groundwater potential on the basis of distribution of low resistivity zones.</abstract>

3D Interpretation of Resistivity Data for Groundwater Potential Assessment of Pakhli Plain, Mansehra District, Pakistan

<abstract><title style='display:none'>Abstract</title>Both Airborne Magnetic and Radiometric datasets were employed to interpret the geology and geological structures that serve as host to gold and associated minerals within the Bida and Zungeru, Niger State, Nigeria. An area of 55 by 110km2, contained within the cretaceous sediments of Bida Basin and the meta-sediments of Zungeru-sarkin-pawa schist belt. Data interpretation involve the application of a mathematical algorithm for data enhancing such as, Reduce to the Equator, Analytical signal, First Vertical Derivative, and Centre for Exploration Targeting (CET) to the magnetic data, and Ternary imaging to the radiometric data, with a sole aim of mapping geological structures such as faults fracture folds joints and geological boundaries and possible gold mineralization veins that arise from hydrothermally altered zones. Two major geological units inhibit the study area, the cretaceous sediment, and the meta-sediments, major feature identifies within the Cretaceous sediment are the folds majority of which are located within the contacts. The result of the 1VD display is the vivid picture of the observed structural features such as faults fractures folds’ contacts labeled F1 to F8 both within the high region of magnetic susceptibility (in red) and low regions (in blue) geology contacts (yellow), folds (bold yellow) all across the field. Prominently at the North-Western corner of the study area are sets of linear structure that trend NE-SW, located within the contacts between the mylonites and the amphibolites and the belt-type meta-sediments located around Katakwo, Gindei, Kwange, Gabas and Akusu villages. Equallyworth mentioning are sets of lineament (in blue) trend E-W all across the mid-region of the study area, precisely at the Eastern corner within and below the Federal University of Technology Minna around Kata-eregi, Sabon-Dagan, Kakaki down Minkwoigi, Sunbwagi, Kakagi, Sabon dagga, and Bobo-shiri towns, where the majority of volcanic activities must have been recorded. The airborne radiometric show mobilization of the immobile thorium Th, concentration, and this also indicated hydrothermally altered zones. The increase in potassium concentration and decrease in K/Th relation observed from radiometric interpretation are very pinpointing of hydrothermal activities within the study area. The gold mineralisations are found within this vein and in the adjacent, highly deformed host rock located below the Federal University of Technology Minna Campus. The deformation seems to comprise principally of pebbly schist, amphibolites along fine-grained and magnetite.</abstract>

Delineating and Interpreting the Gold Veins Within Bida and Zungeru Area, Niger State Nigeria, Using Aeromagnetic and Radiometric Data

<abstract><title style='display:none'>Abstract</title>Forecasting and monitoring the parameters of a drinking water network such as flow, pressure and quality are essential issues for the operator in order to guarantee a compliant distribution at all times. Water leaks are the main problem in the management of drinking water networks, so a drinking water network must be reliable and sustainable to meet the needs of subscribers. The modeling of a network allows, among other things, to determine distribution strategies in order to guarantee continuous quality of service. The EPANET modeling software, developed by the US Environmental Protection Agency, enables the hydraulic and quality behavior of a water distribution network to be simulated on the basis of its parameters. Our work consists of simulating an existing network in the new city of Guelma in order to check all the necessary elements of the network, namely pressure, speed, flow and water quality. The results obtained verified that the pressure at all junctions and the flow rates with their velocities at all mains is sufficiently feasible to supply adequate water to the network in the study area. These results will help to better understand the pipeline network in the Study Area and allow the Study Area to be studied in the future.</abstract>

Analysis of The Simulation of The Water Supply Network of The New City of Guelma by Epanet

<abstract><title style='display:none'>Abstract</title>The Zhob Ophiolite is divided into Naweoba, Omzha and Ali Khanzai blocks. Ali Khanzai Block is further divided into ultramafic, mafic, and lava units which are surrounded by sedimentary rocks successions. The ultramafic unit contains ultramafic tectonic and ultramafic cumulate, mafic rock unit consists of foliated and layered gabbros and mafic dykes are doleritic in composition. Volcanic–volcaniclastic–pelagic rocks unit consists of thick volcanic pillow basalt, hyaloclastite, bedded chert, pelagic limestone and hemipelagic mudstone. The metamorphic sole rocks are tectonically high distorted and dismembered, comprising of amphibolite and greenschist facies. They might have formed through the process of early intra-oceanic obduction of the ophiolite. All units make thrusted contacts and are highly deformed. Petrography and geochemical studies divide the Ali Khanzai Block into rock types such as gabbro, olivine gabbro, dolerite, basalt, basaltic andesite and basaltic trachy-andesite, chert, mudstone, and limestone, dunite, serpentinite, harzburgite, and wehrlite. Mafic dyke intrusions crosscut mantle rocks of block. The mantle rocks are altered, deformed, and deeply weathered, maybe residual melting of enriched mantle peridotite. The contact relationship of dolerite dykes with peridotite indicta that they are late magmatic intrusions. The Crustal gabbros are partially chloritic and sericitic and occur within mantle peridotite,, they may have formed from fractional crystallization in a magma chamber. The volcanic-volcaniclastic-pelagic sediments surround mantle and crustal rock units. It might be a mélange in nature is much like that of the Bagh Complex found beneath the Muslim Bagh Ophiolite, and other ophiolites around the world.</abstract>

Geology of Ali Khanzai Block of Zhob Ophiolite, Balochistan, Pakistan

<abstract><title style='display:none'>Abstract</title>The quality of groundwater from twenty (20) hand-dug wells around the Mando and Rigasa areas, Northwestern Nigeria was evaluated in this study. Physico-chemical parameters like pH, EC, TDS, temperature, Na+, Ca2+, K+, Mg2+, Fe2+, Cl-, HCO3-, NO3-, SO42- and faecal coliform count were analysed. The degree of compliance of the various parameters with international guidelines for drinking water quality were determined and the groundwater classified. Comparison of the results of physico-chemical analysis with the NSDWQ and WHO guidelines revealed that most of the parameters in the groundwater had 100 % compliance except for pH, Mg2+, NO3-, K+ and Fe2+ with percentage compliance of 80, 90, 75, 70 and 40, respectively. This indicates that some of the groundwater samples are not suitable for drinking purpose. Groundwater quality map based on the Water Quality Index values for the various groundwater sample showed that most parts of the study area have excellent groundwater quality. The faecal coliform bacteria count ranged from 0 CFU/100 ml to too numerous to count. Only two (2) groundwater samples (10%) complied with the 0 CFU/100 ml guidelines of the NSDWQ and WHO, while the rest eighteen (18) groundwater samples (90 %) have faecal coliform bacteria count above the recommended value. Most of the groundwater samples are not suitable for drinking based on the faecal coliform count. The groundwater samples are suitable for agricultural purposes based on the SAR, RSC and PI classifications. The groundwater in the study area is dominated by Na-Cl and CaHCO3- type facies water.</abstract>

Groundwater Quality Evaluation in Mando and Rigasa Areas, Kaduna, Northwestern Nigeria

<abstract><title style='display:none'>Abstract</title>Aeromagnetic data acquired over part of the Anambra Basin is analyzed to determine the structural pattern and sedimentary thickness of the basin. The study area is covered by high resolution aeromagnetic data on sheets 301 (Udi), 302 (Nkalagu), 312 (Okigwe) and 313 (Afikpo), and lies between latitudes 5o30’0’‘-6o30’0’‘ and longitudes 7o0’0”-8o0’0”. The whole area was divided into 25 overlapping blocks of 37.2km2 each and a 2D energy spectral analysis was carried out. Total magnetic intensity data was subjected to filtering and analytical techniques to determine the structural pattern, mineralization potential, depth to the basement, variation in the sedimentary thickness. The structural map generated using the vertical derivatives shows that the major structural orientation of the area is in the ENE-WSW trend and the minor trend is the NW to SE direction widespread all over the area. These structures are as a result of the various near-surface magnetic intrusion within the study area. The spectral analysis result shows two depth layers, the deep and the shallow depth, the depth to magnetic basement for the deep anomalous source ranges from 3.3km to 4.8 4km with an average depth of 3.99km, while the depth to shallow magnetic sources ranges between 0.46km to 0.67km and an average of 0.56km within the area. The mineralization pattern in this area follows the ENE-WSW direction.</abstract>

Estimation of The Structural Pattern and Sedimentary Thickness Over Part Of Anambra Basin, Nigeria Using Aeromagnetic Data

<abstract><title style='display:none'>Abstract</title>Walat Formation is equivalent to Bayah Formation. This formation is the beginning of Bogor basin deposition. In this case, age and environment of this formation have been analyzed by previous researchers, but the results of age and environment interpretations have different ranges, especially from its palynological aspect which until now Walat Formation is rarely analyzed using this aspect. This research was conducted to identify the age and depositional environment of Walat Formation in Sukabumi region by using pollen and spores to confirm different interpretations of previous studies. Measure section was carried out in sampling and chemical treatment method was carried out to see palynomorph content in the rock. Furthermore, data analysis was carried out with range of interval zones and pollen grouping based on their environment.The results show that Walat Formation has Late Eocene age based on the interval zone between first occurrence of <italic>Verrucatosporites usmensis</italic> and <italic>Meyeripollis naharkotensis,</italic> and <italic>the last occurence of Proxapertites operculatus, Proxapertites cursus, and Cicatricosisporites eocenicus</italic>. Walat Formation has fluvial depositional environment characterized by the dominance of <italic>Proxapertites operculatus</italic> and <italic>Proxapertites cursus</italic>. The results of this study confirm that the Walat Formation has an Eocene age and a fluvial depositional environment from a palinological aspect.</abstract>

Age and Depositional Environment of Walat Formation Based on Palynological Analysis in Sukabumi Regency, West Java, Indonesia

<abstract><title style='display:none'>Abstract</title>The Revised Universal Soil Loss Equation (RUSLE) was used to study the soil erosion processes in Edda-Afikpo mesas, Lower Cross River watersheds,Nigeria. The mesas occupy an area estimated at 60km2 on a surface relief of about 284m. DEM data, satellite images and basemap of the area were used. Remotely sensed data were ground-truthed through extensive field works. The results show that the process is facilitated by the Trifecta of hill slope hydrology, geology and land use practices. Steep hill Slope of values 78 % at the major hot spots, very fragile, dry and non-plastic sandy soils all aid sediment detachment. Analysis of the index properties which include Liquid Limit(LL) of 25-30,moisture content(w%) of 5.9-7.4,permeability of 1.541x10-3 – 1.636x10-3 cm/s and shear strength of 36-42 KN/m2 predispose the sediments to detachment and erosion. Based on the analysis, the amount of soil loss in the project area is about 1373.79 ton per year. Soil erosivity factor is high at the mesas(5023.83 MJ mm ha−1 h−1 yr−1 - 5069.51 MJ mm ha−1 h−1 yr−1) The sandy layer attain thickness of 50m-60m in places and with high pore pressure development, slope failure are triggered during intense storm events. In terms of vulnerability level in erosion risk, high to very high constitute 4.1% of the watershed which translate to 5.05km2 of the 59km2. The various processes occur simultaneously and are exacerbated by human factors through seasonal bush burning and development along drainage lines. The study reveals that 18.8% of the available land for development is at high to very high risk of erosion. The soil loss model has been validated and the hotspots from the map coincide with the gully sites. The results of this research can therefore be used for conservation and adaptation purposes.</abstract>

A Study of the Dynamics of Soil Erosion Using Rusle2 Modelling and Geospatial Tool in Edda-Afikpo Mesas, South Eastern Nigeria

Author Guidelines

Pakistan Journal of Geology

 The Indian subcontinent is well respected for its growing research activity in the geosciences, particularly in circum-Himalayan earth science. The Pakistan Journal of Geology...

 The Indian subcontinent is well respected for its growing research activity in the geosciences, particularly in circum-Himalayan earth...