<abstract xmlns="http://www.w3.org/1999/xhtml">This paper presents experimental results relevant to the thermal utilisation of rubber wastes. The investigation employed a laboratory-scale bubbling fluidised bed combustor, (BFBC) running on liquefied petroleum gas with quartz sand as the inert bed material. When rubber samples (tyre fragments) were added, the reactor temperature and flue gas concentrations of CO, VOC, SO2, NOx and HCl were monitored. Tests were performed with bed temperatures of 800-1000°C and two different masses of the bed. It has been found that the emitted quantities of NOx and CO were dependent not only on the sample mass but also on the mass (depth) and temperature of the fluidised bed and dropped whilst the bed depth was increased and its temperature was raised.</abstract>

This paper presents experimental results relevant to the thermal utilisation of rubber wastes. The investigation employed a laboratory-scale bubbling fluidised bed combustor, (BFBC) running on liquefied petroleum gas with quartz sand as the inert bed material. When rubber samples (tyre fragments) were added, the reactor temperature and flue gas concentrations of CO, VOC, SO2, NOx and HCl were monitored. Tests were performed with bed temperatures of 800-1000°C and two different masses of the bed. It has been found that the emitted quantities of NOx and CO were dependent not only on the sample mass but also on the mass (depth) and temperature of the fluidised bed and dropped whilst the bed depth was increased and its temperature was raised.

The co-combustion of rubber waste with LPG fuel in a fluidised bed reactor

Faculty of Chemical Engineering and Technology

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

{"article-title":"The co-combustion of rubber waste with LPG fuel in a fluidised bed reactor"}

This paper presents experimental results relevant to the thermal utilisation of rubber wastes. The investigation employed a laboratory-scale bubbling fluidised...

The co-combustion of rubber waste with LPG fuel in a fluidised bed reactor

Publicado en línea: 21 may 2020

Páginas: 73 - 85

Recibido: 27 jul 2018

DOI: https://doi.org/10.4467/2353737XCT.18.116.8891

Palabras clave
rubber composite materials, combustion, fluidisation, LPG fuel

© 2019 Przemysław Migas et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

The co-combustion of rubber waste with LPG fuel in a fluidised bed reactor

Publicado en línea: 21 may 2020

Páginas: 73 - 85

Recibido: 27 jul 2018

DOI: https://doi.org/10.4467/2353737XCT.18.116.8891

Palabras claverubber composite materials, combustion, fluidisation, LPG fuel

© 2019 Przemysław Migas et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Palabras clave
rubber composite materials, combustion, fluidisation, LPG fuel