Chemical and Thermal Methods for Removing Ammonia from Fly Ashes

[1] Zamorowski K., Aspekty dostosowania energetyki krajowej do standardów emisyjnych tlenków azotu – wpływ zastosowanych technologii na pracę kotła oraz koszty realizacji odazotowania spalin, „Energetyka” nr 6/2013,Search in Google Scholar

[2] Wadrak P., Proces inwestycyjny oraz Metody Redukcji NOx, SOx na przykładzie wybranych polskich obiektów energetycznych, Nowoczesna Energetyka Europy Środkowo-Wschodniej, 2015.Search in Google Scholar

[3] Directive 2010/75/EU of 24 November 2010 on industrial emissions (IED), The Minister of Environment of 22 April 2011. On emission standards from installations, OJ No. 95, item. 558.Search in Google Scholar

[4] Brendel G.F., Bonetti J.E. et al., Investigation of Ammonia Adsorption on Fly Ash Due to the Installation of Selective Catalytic Reduction Systems, Technical Report.,West Virginia University Research Corp., 2000Search in Google Scholar

[5] O’Connor, D., Behavior of Ammoniated Fly Ash: Effects of Ammonia on Fly Ash Handling, Disposal, and End-Use, EPRI, Palo Alto, CA: 2002, Technical report no. 1003981Search in Google Scholar

[6] Gąsiorowski S.A., Bittner J., Hrach F., Removing from Fly Ash, Separation Technologies, LLC 101 Hampton Avenue, Needham, Massachusetts, USA, 2015.Search in Google Scholar

[7] Gąsiorowski S.A., Hrach F.J., Method for Removing Ammonia from Ammonia Contaminated Fly Ash, Patent US6077494, 2000.Search in Google Scholar

[8] Szponder D., Badania wybranych właściwości popiołów lotnych z zastosowaniem analizy obrazu, PhD thesis, AGH, 2012.Search in Google Scholar

[9] Sikora T., Nowak P., Raport z inwentaryzacji popiołów lotnych, DBAA/13-901/3370, Research & Development Division, EDF Poland, September 2015[internal publication of EDF Polska].Search in Google Scholar

[10] O’Connor D., Ammonia Removal from Fly Ash: Process Review – Separation Technologies LLC (ST) – Ammonia Removal Process, EPRI, Palo Alto, CA: 2007: 1012697, www.epri.com (access: 28.06.2015).Search in Google Scholar

[11] Kulaots I., Gao Y-M., Hurt R.H., Suuberg E.M., Adsorption of Ammonia on Coal Fly Ash, International Ash Utilization Symposium, Center For Applied Energy Research, University of Kentucky, 2001.Search in Google Scholar

[12] Czekaj M., Czupryński P., Podsumowanie wiedzy w Grupie EDF Polska i EDF Polska R&D w zakresie zjawiska „poślizgu amoniaku” po instalacjach deNOx, DBAA/10-911/3301, Research & Development Division, EDF Poland, May 2014 [internal publication of EDF Polska].Search in Google Scholar

[13] Zhao Y-l., Yang W., Zhou J., et.al., Experimental study on ammonia adsorption by coal ashes, “Journal of Fuel Chemistry and Technology”, Vol. 43(3), 266–272.10.1016/S1872-5813(15)30006-2Search in Google Scholar

[14] Ma Z.B., Bai Z.Q., Bai Jet.al., Evolution of coal ashwith high Si/Al ratio under reducing atmosphere at hightemperature, “Journal of Fuel Chemistry andTechnology”, 40(3), 2012, 279–285.Search in Google Scholar

[15] Gao Y.M., Külaots I., Chen X., et.al., The effect of solid fuel type and combustion conditions onresidual carbon properties and fly ash quality, Proceedings of the Combustion Institute, 29(1), 2002, 475–483.10.1016/S1540-7489(02)80062-1Search in Google Scholar

[16] Gąsiorowski S.A., Bittner J., Hrach F., Removing from Fly Ash, International Ash Utilization Symposium, Center For Applied Energy Research, University of Kentucky, 2001.Search in Google Scholar

[17] Ziegler, SD., Bittner, J, Fly Ash Carbon Separation and Ammonia Removal in Florida, IEEE-IAS/PCA Cement Industry Technical Conference (CIC), 2013.10.1109/CITCON.2013.6525275Search in Google Scholar

[18] Ammonia Removal from Fly Ash: Process Review, Headwaters Ammonia Slip Mitigation (ASM™) Technology (www.epri.com), EPRI Project Manager D. O’Connor, Technical Update, 2005.Search in Google Scholar

[19] Shilong He, ChangbinZhang, Min Yang, YuZhang, WenqingXu, Nan Cao, Hong He, “Separation and Purification Technology” 58, 2007, 173–178.10.1016/j.seppur.2007.07.015Search in Google Scholar

[20] Chmielarz L., Węgrzyn A.,Wojciechowska M., Witkowski S., Michalik M., Selective Catalytic Oxidation (SCO) of Ammonia to Nitrogen over Hydrotalcite Originated Mg–Cu–Fe Mixed Metal Oxides, Catalysis Letters, 141(9), 09/2011, 1345–1354.10.1007/s10562-011-0653-8Search in Google Scholar

[21] Shresthaa S., Harolda M.P., Kamasamudramb K., Kumarb A, Olssonc L., Leistnerc K., Selective oxidation of ammonia to nitrogen on bi-functional Cu–SSZ-13 and Pt/Al2O3 monolith catalyst, “Catalysis Today” 267, 2016, 130–144.10.1016/j.cattod.2015.11.035Search in Google Scholar

[22] Kastner R.J., Catalytic ozonation of ammonia using biomass char and wood fly ash, “Chemosphere” 75, 2009, 739–744.10.1016/j.chemosphere.2009.01.03519232426Search in Google Scholar

[23] Mehta A.K., Hurt R.H., Gao Y., Chen X., Suuberg E.M., Dry and Semi-dry methods for removal of ammonia from fly ash, Patent US6746654 B2, 2004Search in Google Scholar

[24] Wang H., Ban H., Golden D., Ladwig K., Ammonia release characteristic from coal combustion fly ash, “Fuel Chemistry Division Preprints”, 47(2), 2002, 810.Search in Google Scholar

[25] Cardone C., Kim A., Schroeder K., Release of ammonia from SCR/SNCR fly ashes, World of Coal Ash (WOCA), April 11–15, 2005.Search in Google Scholar

[26] Keppeler J.G., Carbon Burn-Out, Commercialization and Experience Update, http://www.pmiash.com/cbo/acaa01paper.html, 2009 (access: 30.06.2016).Search in Google Scholar

[27] Kirkconnell S.F., P.E. and J.G. Keppeler, P.E., Carbon Burn-Out™ – A State of the Art in Commercial Ash Beneficiation, PMI Ash Technologies SVP named new American Coal Ash Association Chair, May 2007.Search in Google Scholar

[28] Czekaj M., Kulesz E., Jura K., Zawartość amoniaku w popiele – analiza ryzyka związanego z zastosowaniem popiołów oraz wskazanie możliwości modyfikacji instalacji odpopielania, Report DBAA/10-911/3002, Research & Development Division, EDF Poland, October 2012 [internal publication of EDF Polska].Search in Google Scholar

[29] Górecka T., Określanie kinetyki uwalniania się amoniaku z popiołów lotnych po uruchomieniu instalacji odazotowania, Report no 271/703/12, ZWP Emitor, July-September, 2012.Search in Google Scholar

[30] Rubel A.M., Forms of ammonia on SCR, SNCR and FGC combustion ashes, “Fuel Chemistry Division Preprints”, 47(2), 834, 2002.Search in Google Scholar

[31] Y.M. Gao, X. Chen, G. Fujisaki, A. Mehta, E.M. Suuberg and R.H. Hurt, Dry and SemiDry Methods for Removal of Ammonia from Pulverized Fuel Combustion Fly Ash,“Energy and Fuels” 16, 2002, 1398–1404.10.1021/ef020018qSearch in Google Scholar

[32] Rubel A.M., Rathbone R.F., Stencel J.M., Thermal Characteristics of Ammonia Release from Combustion Ash, International Ash Utilization Symposium, Center for Applied Energy Research, University of Kentucky, 2001.Search in Google Scholar

[33] Conn R., Sarubac N., Levy E., Removing ammonia from fly ash, “Lehigh energy update”, Vol. 19(2), June 2001, http://www.lehigh.edu/~inenr/leu/leu_28.pdf%5D. (access: 10.09.2015).Search in Google Scholar

[34] Lawton K.B, Ammonia removal from fly ash using a continuously operating acoustically assisted fluidized bed, Theses and Dissertations, Lehigh University, 2002, 733.Search in Google Scholar

[35] Lawton K.B., ERC Completes development of technique for removing ammonia fr om fly ash, Lehigh energy update, Vol. 20(1), 2002, http://www.lehigh.edu/energy/leu/leu_32.pdf (access: 10.09.2015).Search in Google Scholar