<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>A typical rack and pinion drive set is comprised of a rack and a pinion. There is an inter-tooth clearance between the mating teeth of the rack and the pinion, which has advantages and disadvantages. The disadvantage of this clearance is the errors that occur in the positioning of the machine tool during set-up. Elimination of clearance between teeth is possible by using a pinion drive with two pinions. This ensures continuous contact between the teeth, regardless of the direction of machine movement.</p>
<p>These are found on new machines, while older machines do not have such a solution. This paper presents a solution with two pinions, which can be used in such older machines and which makes it possible to achieve qualitative parameters that were not possible before.</p>
</abstract>

A typical rack and pinion drive set is comprised of a rack and a pinion. There is an inter-tooth clearance between the mating teeth of the rack and the pinion, which has advantages and disadvantages. The disadvantage of this clearance is the errors that occur in the positioning of the machine tool during set-up. Elimination of clearance between teeth is possible by using a pinion drive with two pinions. This ensures continuous contact between the teeth, regardless of the direction of machine movement.
These are found on new machines, while older machines do not have such a solution. This paper presents a solution with two pinions, which can be used in such older machines and which makes it possible to achieve qualitative parameters that were not possible before.

Improved rack and pinion drive

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

{"article-title":"Improved rack and pinion drive"}

A typical rack and pinion drive set is comprised of a rack and a pinion. There is an inter-tooth clearance between the mating teeth of the rack and the pinion,...

Improved rack and pinion drive

Publicado en línea: 04 sept 2021

Páginas: -

Recibido: 22 ene 2021

Aceptado: 30 ago 2021

DOI: https://doi.org/10.37705/TechTrans/e2021013

Palabras clave
rack-and-pinion, clearance-free-gear, clearance between teeth, pinion, rack, positioning

© 2021 Tadeusz Sawicki, published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Improved rack and pinion drive

Publicado en línea: 04 sept 2021

Páginas: -

Recibido: 22 ene 2021

Aceptado: 30 ago 2021

DOI: https://doi.org/10.37705/TechTrans/e2021013

Palabras claverack-and-pinion, clearance-free-gear, clearance between teeth, pinion, rack, positioning

© 2021 Tadeusz Sawicki, published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Palabras clave
rack-and-pinion, clearance-free-gear, clearance between teeth, pinion, rack, positioning