<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this article, one of the possible, effective methods of assessing the technical state of mining machinery and devices has been presented. The article's main goal is to show the possible methods and ways of measuring temperature, oscillations, and vibrations generated during the operation of mining equipment and machines’ gears, which are possible in underground conditions. Devices measuring temperatures without coming into contact with the given object are built based on different types of infrared radiation detectors or matrixes of such detectors. Thermal imaging devices picture the temperature distribution on the entire surface instead of pyrometers, which measure temperatures at a given point. However, vibrations and oscillations generated by the work of gears of devices and machinery have been made using a vibrometer pen and a machine condition tester, after which the obtained measurements were used to diagnose the degradation of individual elements of those machines. Such an assessment of the degradation of individual elements of machines in production conditions has been applied with positive results in one of the mines of the Polish Mining Group (Polska Grupa Górnicza – PGG).</p>
</abstract>

In this article, one of the possible, effective methods of assessing the technical state of mining machinery and devices has been presented. The article's main goal is to show the possible methods and ways of measuring temperature, oscillations, and vibrations generated during the operation of mining equipment and machines’ gears, which are possible in underground conditions. Devices measuring temperatures without coming into contact with the given object are built based on different types of infrared radiation detectors or matrixes of such detectors. Thermal imaging devices picture the temperature distribution on the entire surface instead of pyrometers, which measure temperatures at a given point. However, vibrations and oscillations generated by the work of gears of devices and machinery have been made using a vibrometer pen and a machine condition tester, after which the obtained measurements were used to diagnose the degradation of individual elements of those machines. Such an assessment of the degradation of individual elements of machines in production conditions has been applied with positive results in one of the mines of the Polish Mining Group (Polska Grupa Górnicza – PGG).

Assessment of the technical state of mining machinery and devices with the use of diagnostic methods

Production Engineering Archives

This work is licensed under the Creative Commons Attribution 4.0 International License.

In this article, one of the possible, effective methods of assessing the technical state of mining machinery and devices has been presented. The article's main...

Assessment of the technical state of mining machinery and devices with the use of diagnostic methods

Publicado en línea: 26 may 2024

Páginas: 266 - 272

Recibido: 01 mar 2024

Aceptado: 06 abr 2024

DOI: https://doi.org/10.30657/pea.2024.30.26

Palabras clave
machines, mining devices, vibration measurements, vibrations, diagnoses

© 2024 Witold Biały, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Assessment of the technical state of mining machinery and devices with the use of diagnostic methods

Publicado en línea: 26 may 2024

Páginas: 266 - 272

Recibido: 01 mar 2024

Aceptado: 06 abr 2024

DOI: https://doi.org/10.30657/pea.2024.30.26

Palabras clavemachines, mining devices, vibration measurements, vibrations, diagnoses

© 2024 Witold Biały, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Palabras clave
machines, mining devices, vibration measurements, vibrations, diagnoses