Influence of the drill bit tip geometry on the rotary drilling process performed with a hand-held hydraulic drill

1Beste, U., Jacobson, S., 2008. A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons. Wear 264, 1129–1141. DOI: 10.1016/j.wear.2007.01.030Search in Google Scholar

2Biały, W., 2015. Innovative solutions applied in tools for determining coal mechanical proprerties. Management Systems in Production Engineering 202–209. DOI: 10.12914/MSPE-02-04-2015Search in Google Scholar

3Bołoz, Ł., 2020. Interpretation of the results of mechanical rock properties testing with respect to mining methods. AMS 25, 81–93. DOI: 10.46544/AMS.v25i1.8Search in Google Scholar

4Bołoz, Ł., Midor, K., 2019. The procedure of choosing an optimal offer for a conical pick as an element of realizing the sustainable development concept in mining enterprises. AMS 24, 140–150.Search in Google Scholar

5Feito, N., Díaz-Álvarez, J., Díaz-Álvarez, A., Cantero, J., Miguélez, M., 2014. Experimental Analysis of the Influence of Drill Point Angle and Wear on the Drilling of Woven CFRPs. Materials 7, 4258–4271. DOI: 10.3390/ma7064258Search in Google Scholar

6Gupta, A., Chattopadhyaya, S., Hloch, S., 2013. Critical Investigation of Wear Behaviour of WC Drill Bit Buttons. Rock Mech Rock Eng 46, 169–177. DOI: 10.1007/s00603-012-0255-9Search in Google Scholar

7Hamzaban, M.-T., Rostami, J., Dahl, F., Macias, F.J., Jakobsen, P.D., 2023. Wear of Cutting Tools in Hard Rock Excavation Process: A Critical Review of Rock Abrasiveness Testing Methods. Rock Mech Rock Eng 56, 1843–1882. DOI: 10.1007/s00603-022-03187-xSearch in Google Scholar

8Kahraman, S., Fener, M., Kasling, H., Thuro, K., 2018. Investigating the effect of strength on the LCPC abrasivity of igneous rocks. Geomechanics and Engineering 15, 805–810. DOI: 10.12989/GAE.2018.15.2.805 Search in Google Scholar

9Kessai, I., Benammar, S., Doghmane, M.Z., Tee, K.F., 2020. Drill Bit Deformations in Rotary Drilling Systems under Large-Amplitude Stick-Slip Vibrations. Applied Sciences 10, 6523. DOI: 10.3390/app10186523 Search in Google Scholar

10Krauze, K., Bołoz, Ł., Wydro, T., 2015. Parametric Factors for the Tangential-Rotary Picks Quality Assessment. Archives of Mining Sciences 60, 265–281. DOI: 10.1515/amsc-2015-0018 Search in Google Scholar

11Krauze, K., Bołoz, Ł., Wydro, T., Mucha, K., 2019. Investigations into the wear rate of conical picks with abrasion-resistant coatings in laboratory conditions. IOP Conf. Ser.: Mater. Sci. Eng. 679, 012012. DOI: 10.1088/1757-899X/679/1/012012Search in Google Scholar

12Liu, W., Deng, K., Li, R., Li, L., Zhu, X., Gong, S., 2022. The Performance and Failure Mechanism of Drill Bit in Granite Formation Drilling. Arab J Sci Eng. DOI: 10.1007/s13369-022-07578-8Search in Google Scholar

13Midor, K., Wilkowski, G., 2021. Recertification of a Quality Management System based on ISO 9001 - is it a must for a modern manufacturing company? Production Engineering Archives 27, 217–222. DOI: 10.30657/pea.2021.27.29Search in Google Scholar

14Plinninger, R., Spaun, G., Thuro, K., 2002. Predicting tool wear in drill and blast. Tunnels and Tunnelling International 34.Search in Google Scholar

15Riane, R., Kidouche, M., Illoul, R., Doghmane, M.Z., 2022. Unknown Resistive Torque Estimation of a Rotary Drilling System Based on Kalman Filter. IETE Journal of Research 68, 2640–2651. DOI: 10.1080/03772063.2020.1724834Search in Google Scholar

16Saad, A.M., Youness, F., 2023. Towards Improved Management Within the Cottage Industry: Product Lifecycle Management Case. Management Systems in Production Engineering 31, 102–110. DOI: 10.2478/mspe-2023-0013Search in Google Scholar

17Saai, A., Bjørge, R., Dahl, F., Antonov, M., Kane, A., Diop, J.-B., Ojala, N., 2020. Adaptation of Laboratory tests for the assessment of wear resistance of drill-bit inserts for rotary-percussive drilling of hard rocks. Wear 456–457, 203366. DOI: 10.1016/j.wear.2020.203366Search in Google Scholar

18Sakiz, U., Aydin, H., Yarali, O., 2022. Investigation of the rock drilling performance of rotary core drilling. Bulletin of Engineering Geology and The Environment 81. DOI: 10.1007/s10064-021-02534-6Search in Google Scholar

19Shankar, V.K., Kunar, B.M., Murthy, C.S., Ramesh, M.R., 2020. Measurement of bit-rock interface temperature and wear rate of the tungsten car-bide drill bit during rotary drilling. Friction 8, 1073–1082. DOI: 10.1007/s40544-019-0330-2Search in Google Scholar

20Siwiec, D., Pacana, A., 2021. Method of improve the level of product quality. Production Engineering Archives 27, 1–7. DOI: 10.30657/pea.2021.27.1Search in Google Scholar

21Skowron, A., 2015. Tool Lifecycle Management In Industrial Practice. Management Systems in Production Engineering 69–75. DOI: 10.12914/MSPE-04-02-2015 Search in Google Scholar