Thermal comfort assessment in the modern passenger car under actual operational conditions

Amanowicz, Ł., Wojtkowiak, J., 2021. Comparison of Single- and Multipipe Earth-to-Air Heat Exchangers in Terms of Energy Gains and Electricity Consumption: A Case Study for the Temperate Climate of Central Europe. Energies 14, 8217, DOI: 10.3390/en14248217 Open DOISearch in Google Scholar

Bielski, A., 2021. Mixing effects in the river downstream from pollution discharge point. Technical Transactions 118, art. e2021004, DOI: 10.37705/TechTrans/e2021004 Open DOISearch in Google Scholar

Cigarini, F., Fay, T-A., Artemenko, N., Göhlich, D., 2021. Modeling and Experimental Investigation of Thermal Comfort and Energy Consumption in a Battery Electric Bus. Word Electric Vehicle Journal, 12(1), art. 7, DOI: 10.3390/WEVJ12010007 Open DOISearch in Google Scholar

Czyczuła, W., Rochel, M., 2021. Operational problems of tramway infrastructure in sharp curves. Technical Transactions 118, art. e2021015. DOI: 10.37705/TechTrans/e2021015 Open DOISearch in Google Scholar

Dabek, L., Kapjor, A., Orman, L.J., 2019. Distilled water and ethyl alcohol boiling heat transfer on selected meshed surfaces. Mechanics&Industry, 20(7), art. 701, DOI: 10.1051/meca/2019068 Open DOISearch in Google Scholar

Danca, P.A., Nastase, I., Croitoru, C., Bode, F., Sandu, M., 2020. Thermal comfort evaluation inside a car parked under sun and shadow using a thermal manikin. IOP Conference Series: Earth and Environmental Science, 664(1), art. 012064, DOI: 10.1088/1755-1315/664/1/012064 Open DOISearch in Google Scholar

Danca, P., Vartires, A., Dogeanu, A., 2016. An overview of current methods for thermal comfort assessment in vehicle cabin. Energy Procedia, 85, 162-169, DOI: 10.1016/j.egypro.2015.12.322 Open DOISearch in Google Scholar

Danielewski, H, Skrzypczyk A, Zowczak W, Gontarski D, Płonecki L, Wiśniewski H, Soboń D, Kalinowski A, Bracha G, Borkowski K., 2021. Numerical analysis of laser-welded flange pipe joints in lap and fillet configurations. Technical Transactions 118, art. e2021030. DOI: 10.37705/TechTrans/e2021030 Open DOISearch in Google Scholar

Djoković, J.M., Nikolić, R.R., Bujnak, J., Hadzima, B., Pastorek, F., Dwornicka, R., Ulewicz, R., 2022. Selection of the Optimal Window Type and Orientation for the Two Cities in Serbia and One in Slovakia. Energies, 15, 323. DOI: 10.3390/en15010323 Open DOISearch in Google Scholar

Feng, J., Yan, T., Zhao, K., 2021. Thermal Comfort Analysis of Passenger Compartment of a Hybrid Vehicle, Journal of Physics: Conference Series, 1986, art. 012057, DOI: 10.1088/1742-6596/1986/1/012057 Open DOISearch in Google Scholar

Gazda, A., Pacana, A., Malindzak, D., 2013. Study on improving the quality of stretch film by Taguchi method. Przemysl Chemiczny, 92(6), 980-982. Search in Google Scholar

Giaconia, C., Orioli, A., Di Gangi, A., 2015. A correlation linking the predicted mean vote and the mean thermal vote based on an investigation on the human thermal comfort in short-haul domestic flights. Applied Ergo-nomics, 48, 202-213, DOI: 10.1016/j.apergo.2014.12.003 Open DOISearch in Google Scholar

Khatoon, S., Kim, M., H., 2020. Thermal Comfort in the Passenger Compartment Using a 3-D Numerical Analysis and Comparison with Fanger’s Comfort Models. Energies, 13(3), art. 690, DOI: 10.3390/en13030690 Open DOISearch in Google Scholar

Kosiński P., Skotnicka-Siepsiak A., 2022. Possibilities of Adapting the University Lecture Room to the Green University Standard in Terms of Thermal Comfort and Ventilation Accuracy. Energies, 15, 3735, DOI: 10.3390/en15103735 Open DOISearch in Google Scholar

Krawczyk, N., Dębska, L., Białek, A., 2021. Thermal Comfort in the Modern Car-Experimental Analysis and Verification of the Fanger Model. International Review of Mechanical Engineering, 15 (12), 609-614, DOI: 10.15866/ireme.v15i12.21473 Open DOISearch in Google Scholar

Kubecki A, Śliwiński C, Śliwiński J, Lubach I, Bogdan L, Maliszewski W., 2021. Assessment of the technical condition of mines with mechanical fuses. Technical Transactions 118, art. e2021025, DOI: 10.37705/Tech-Trans/e2021025 Open DOISearch in Google Scholar

Kurp, P., Danielewski, H., 2022. Metal expansion joints manufacturing by a mechanically assisted laser forming hybrid method – concept. Technical Transactions 119, art. e2022008, DOI: 10.37705/TechTrans/e2022008 Open DOISearch in Google Scholar

Majewski, G., Orman, L.J., Telejko, M., Radek, N., Pietraszek, J., Dudek, A., 2020. Assessment of Thermal Comfort in the Intelligent Buildings in View of Providing High Quality Indoor Environment. Energies, 13(8), art. 1973, DOI:10.3390/en13081973 Open DOISearch in Google Scholar

Maltsevich, I., 2021. Technological structures in construction during the implementation of the National Strategy for Sustainable Development – 2035. Construction of Optimized Energy Potential, 10(2), 61-68, DOI: 10.17512/bozpe.2021.2.08 Open DOISearch in Google Scholar

Miletic, I., Ilic, A., Nikolic, R.R., Ulewicz, R., Ivanovic, L., Sczygiol, N., 2020. Analysis of selected properties of welded joints of the HSLA Steels. Materials, 13(6), art. 1301, DOI: 10.3390/ma13061301 Open DOISearch in Google Scholar

Orman, Ł,.J., 2014a. Boiling heat transfer on single phosphor bronze and copper mesh microstructures. EPJ Web of Conf., 67, art. 02087, DOI: 10.1051/epjconf/20146702087 Open DOISearch in Google Scholar

Orman, Ł.J., 2014b. Boiling heat transfer on meshed surfaces of different aperture. AIP Conference Proc., 1608, 169-172, DOI: 10.1063/1.4892728 Open DOISearch in Google Scholar

Orman, L.J., Radek, N., Pietraszek, J., Szczepaniak, M., 2020. Analysis of Enhanced Pool Boiling Heat Transfer on Laser-Textured Surfaces. Energies, 13(11), art. 2700, DOI: 10.3390/en13112700 Open DOISearch in Google Scholar

Pala, U., Oz, H., R., 2015. An investigation of thermal comfort inside a bus during heating period within a climatic chamber. Applied Ergonomics, 48, 164-176, DOI: 10.1016/j.apergo.2014.11.014 Open DOISearch in Google Scholar

Petrash, V., Khomenko, A., Polomannyy, O., Visotska, M., 2021. Integration of ground and ventilation air energy for heating buildings. Construction of Optimized Energy Potential, 10(1), 7-17, DOI: 10.17512/bozpe.2021.1.01 Open DOISearch in Google Scholar

Pietraszek, J., 2003. Response surface methodology at irregular grids based on Voronoi scheme with neural network approximator. In: Rutkowski, L., Kacprzyk, J. (eds.) Neural Networks and Soft Computing. Advances in Soft Computing, vol 19. Physica, Heidelberg, 250-255, DOI:10.1007/978-3-7908-1902-1_35 Open DOISearch in Google Scholar

Pietraszek, J., Gadek-Moszczak, A., Torunski, T., 2014. Modeling of Errors Counting System for PCB Soldered in the Wave Soldering Technology. Advanced Materials Research, 874, 139-143, DOI: 10.4028/www.scientific.net/AMR.874.139 Open DOISearch in Google Scholar

Pietraszek, J., Szczotok, A., Radek, N., 2017. The fixed-effects analysis of the relation between SDAS and carbides for the airfoil blade traces. Archives of Metallurgy and Materials, 62(1), 235-239, DOI: 10.1515/amm-2017-0035 Open DOISearch in Google Scholar

Radek, N., Dwornicka, R., 2020. Fire properties of intumescent coating systems for the rolling stock. Communications – Scientific Letters of the University of Žilina 22, 90-96, DOI: 10.26552/com.C.2020.4.90-96 Open DOISearch in Google Scholar

Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Archives of Metallurgy and Materials, 63, 809-816, DOI: 10.24425/122407 Open DOISearch in Google Scholar

Radzajewski P., 2021. Calculation of brake-force distribution on three-axle agricultural trailers using simulation methods. Technical Transactions 118, art. e2021029, DOI: 10.37705/TechTrans/e2021029 Open DOISearch in Google Scholar

Ravindra, K., Agarwal, N., Mor, S., 2021. Assessment of thermal comfort parameters in various car models and mitigation strategies for extreme heat-health risks in the tropical climate. Journal of Environmental Management, 267, art. 110655, DOI: 10.1016/j.jenvman.2020.110655 Open DOISearch in Google Scholar

Regulski, P, Abramek, K., 2022. The application of neural networks for the life-cycle analysis of road and rail rolling stock during the operational phase. Technical Transactions 119, art. e2022002. DOI: 10.37705/Tech-Trans/e2022002 Open DOISearch in Google Scholar

Rolle, A., Schmandt, B., Guinet, C., Bengler, K., 2021. Assessment of Thermal Comfort in Different Vehicle-Classes – The Suitability of ISO 14505-2:2006-12, LNNS, 221, 806-813, DOI: 10.1007/978-3-030-74608-7_99 Open DOISearch in Google Scholar

Saleel, C.,A., Mujeebu, M.,A., Algarni, C., 2019. Coconut oil as phase change material to maintain thermal comfort in passenger vehicles. Journal of Thermal Analysis and Calorimetry, 136, 629-636, DOI: 10.1007/s10973-018-7676-y Open DOISearch in Google Scholar

Simion, M., Socaciu, L., Unguresan, P., 2016. Factors which Influence the Thermal Comfort Inside of Vehicles. Energy Procedia, 85, 470-480, DOI: 10.1016/j.egypro.2015.12.229 Open DOISearch in Google Scholar

Siwiec, D., Dwornicka, R., Pacana, A., 2020. Improving the non-destructive test by initiating the quality management techniques on an example of the turbine nozzle outlet. Materials Research Proceedings, 17, 16-22, DOI: 10.21741/9781644901038-3 Open DOISearch in Google Scholar

Szczotok, A., Chmiela, B., 2014. Effect of heat treatment on chemical segregation in CMSX-4 nickel-base superalloy. Journal of Materials Engineering and Performance, 23(8), 2739-2747, DOI: 10.1007/s11665-013-0843-1 Open DOISearch in Google Scholar

Szczotok, A., Pietraszek, J., Radek, N., 2017. Metallographic study and repeatability analysis of gamma ' phase precipitates in cored, thin-walled castings made from IN713C superalloy. Archives of Metallurgy and Materials, 62(2), 595-601, DOI: 10.1515/amm-2017-0088 Open DOISearch in Google Scholar

Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018 27^th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1264-1269. Search in Google Scholar

Ujma, A., Jura, J., 2021. Thermal emissivity of tent fabric and its influence on the thermal insulation of tent walls. Construction of Optimized Energy Potential, 10(2), 15-22, DOI: 10.17512/bozpe.2021.2.02 Open DOISearch in Google Scholar

Ulewicz, R., Mazur, M., Knop, K., Dwornicka, R., 2020. Logistic controlling processes and quality issues in a cast iron foundry. Materials Research Proceedings, 17, 65-71, DOI:10.21741/9781644901038-10 Open DOISearch in Google Scholar

Vink, P., Bazley, C., Kamp, I., Blok, M., 2021. Possibilities to improve the aircraft interior comfort experience. Applied Ergonomics, 43, 354-359, DOI: 10.1016/j.apergo.2011.06.011 Open DOISearch in Google Scholar

Wójcicka, K., 2021. The efficiency of municipal sewage treatment plants inspiration for water recovery. Technical Transactions 118, art. e2021023, DOI: 10.37705/TechTrans/e2021023 Open DOISearch in Google Scholar

Wysoczański, A, Kamyk Z, Yvinec Y., 2021. Analysis of the possibility of employing 3D printing technology in crisis situations. Technical Transactions 118, art. e2021008, DOI: 10.37705/TechTrans/e2021008 Open DOISearch in Google Scholar

Zhou, X., Lai, D., Chen, Q., 2019. Experimental investigation of thermal comfort in a passenger car under driving conditions. Building and Environment, 149, 109-119, DOI: 10.1016/j.buildenv.2018.12.022 Open DOISearch in Google Scholar

Zhou, X., Lai, D., Chen, Q., 2020 Thermal sensation model for driver in a passenger car with changing solar radiation. Building & Environment, 183, art. 107219, DOI: 10.1016/j.buildenv.2020.107219 Open DOISearch in Google Scholar

Zhou, X., Liu, Y., Luo, M., Zheng, S.,Yang, R., Zhang, X., 2022. Overall and thermal comfort under different temperature. noise, and vibration exposures. Indoor Air, 32, art. e12915, DOI: 10.1111/ina.12915 Open DOISearch in Google Scholar