[
Abahri, K., Belarbi, R., Trabelsi, A., 2011. Contribution to analytical and numerical study of combined heat and moisture transfers in porous building materials, Building and environment. 46 (7), 1354–1360, DOI: 10.1016/j.buildenv.2010.12.02010.1016/j.buildenv.2010.12.020
]Search in Google Scholar
[
Alshboul, A.A., Alkurdi, N.Y., 2019. Enhancing the Strategies of Climate Responsive Architecture. The Study of Solar Accessibility for Buildings Standing on Sloped Sites. Modern Applied Science, 13 (1), 69-84, DOI: 10. 5539/mas.v13n1p6910.5539/mas.v13n1p69
]Search in Google Scholar
[
Aksamija, A., 2015., Design methods for sustainable, high-performance building facades. Advances in Building Energy Research, 10(2), 1-23, DOI: 10.5539/mas.v13n1p6910.5539/mas.v13n1p69
]Search in Google Scholar
[
Albatayneh, A., Alterman D., Page A., Moghtaderi B., 2018. The significance of building design for the climate. Environmental and Climate Technologies, 22, 165-178, DOI: 10.2478/rtuect-2018-001110.2478/rtuect-2018-0011
]Search in Google Scholar
[
Albatayneh, A., 2021. Optimising the parameters of a building envelope in the east mediterranean Saharan, cool climate zone. Buildings, 11, 43, DOI: 10.3390/buildings1102004310.3390/buildings11020043
]Search in Google Scholar
[
Alexandrovsky, S.V., 1966. Calculation of concrete and reinforced concrete structures for temperature and humidity effects. Stroyizdat, Moskow, Russian.
]Search in Google Scholar
[
Al-Sanea, S.A., Zedan, M.F., Al-Hussain, S.N., 2012. Effect of thermal mass on performance of insulated building walls and the concept of energy savings potential. Applied Energy, Elsevier Ltd, 89, 430-442.10.1016/j.apenergy.2011.08.009
]Search in Google Scholar
[
Arvind, R. 2016. Investigation of cracks in buildings. “Forensic Structural Engineering” a National conference in VIT Chennai, campus, 1.
]Search in Google Scholar
[
Aste, N., Leonforte, F., Manfren. M., Mazzon M., 2015. Thermal inertia and energy efficiency – parametric simulation assessment on a calibrated case study. Appl Energy, 145, 111-123, DOI: 10.1016/j.apenergy.2015.01.08410.1016/j.apenergy.2015.01.084
]Search in Google Scholar
[
Boley, B., Weiner, J., 2013. Theory of Thermal Stresses. Dover Publications, Incorporated, New York
]Search in Google Scholar
[
Barashkov, V.N., Smolina, I.Yu., Puteeva L.E., Pestsov, D.N., 2012. Foundations of the theory of elasticity. Publishing house of TGASU, Tomsk, Russian.
]Search in Google Scholar
[
Basok, B., Davydenko, B., Goncharuk, S., 2013. Different variants of thermorenovation of enclosing constructions of floor part in the existing office building and monitoring of heat losses during its protracted exploitation. Science and Innovations, 9(2), 18-21, Ukrainian, DOI: 10.15407/scin9.02.01810.15407/scin9.02.018
]Search in Google Scholar
[
Basok, B., Davydenko, B., Timoshchenko, A., Goncharuk, S., 2016. Temperature and humidity conditions of wall construction with layer of insulation in the winter period. Industrial Heat Engineering, 38(6), 38-46, Ukrainian, DOI: 10.31472/ihe.6.2016.0610.31472/ihe.6.2016.06
]Search in Google Scholar
[
Costanzo, G., Iacovella, S., Ruelens, F., Leurs, T., Claessens, B., 2016. Experimental analysis of data-driven control for a building heating system. Sustainable Energy, Grids and Networks, Elsevier, 6, 81–90, arXiv: 1507.0363810.1016/j.segan.2016.02.002
]Search in Google Scholar
[
Harkouss, F., Fardoun, F., Biwole, P.H., 2018. Passive design optimization of low energy buildings in different climates. Energy, Elsevier, 165(PA), 591-613, DOI: 10.1016/j.energy.2018.09.01910.1016/j.energy.2018.09.019
]Search in Google Scholar
[
Hemsath, T.L, Bandhosseini, K.A., 2015. Sensitivity analysis evaluating basic building geometry’s effect on energy use. Renewable Energy, 76, 526-38, DOI: 10.1016/j.renene.2014.11.04410.1016/j.renene.2014.11.044
]Search in Google Scholar
[
Isachenko, V.P., Osipova, V.A., Sukomel, A.S., 1975. Heat transfer, Energiya Moscow, Russian
]Search in Google Scholar
[
Kalema, T., Johannesson, G., Pylsy, P., Hagengran, P., 2008. Accuracy of energy analysis of buildings: a comparison of a monthly energy balance method and simulation methods in calculating the energy consumption and the effect of thermal mass. Journal of Building Physics, 32, 101-130, DOI: 10.1177/174425910809392010.1177/1744259108093920
]Search in Google Scholar
[
Kamal, M.A., 2020. Technological interventions in building facade system: energy efficiency and environmental sustainability, Architecture research, 10(2), 45-53, DOI: 10.5923/j.arch.20201002.01
]Search in Google Scholar
[
Kovalenko, A.D., 1970. Fundamentals of thermoelasticity. Naukova Dumka, Kiev, Ukraine
]Search in Google Scholar
[
Krichevskii, A.P., 1984. Calculation of reinforced concrete engineering structures for temperature effects, Stroyizdat, Moscow
]Search in Google Scholar
[
Kossecka, E., Kosny, J., 2002. Influence of insulation configuration on heating and cooling loads in a continuously used building. 2002, Energy and buildings, 34, 321-331, DOI:10.1016/S0378-7788(01)00121-910.1016/S0378-7788(01)00121-9
]Search in Google Scholar
[
Kylili, A., Fokaides, P.A., 2015. Numerical simulation of phase change materials for building applications: A review. Advances in building energy research, 11, 1-25, DOI: 10.1080/17512549.2015.111646510.1080/17512549.2015.1116465
]Search in Google Scholar
[
Kontoleon, K.J., Eumorfopoulou, E.A., 2008. The influence of wall orientation and exterior surface solar absorptivity on time lag and decrement factor in the Greek region. Renewable Energy, 33, 1652-1664, DOI: 10.1016/j.renene.2007.09.00810.1016/j.renene.2007.09.008
]Search in Google Scholar
[
Lechner, N., 2014. Heating, Cooling, Lighting: Sustainable Design Methods for Architects. John, Wiley & Sons, New York, United States
]Search in Google Scholar
[
Paruta, V., 2012. Theoretical premises for optimizing the formulation and technological parameters of plaster mortars for walls made of aerated concrete blocks. Civil Engineering Journal, 30-36, DOI: 10.5862/MCE.34.410.5862/MCE.34.4
]Search in Google Scholar
[
Reynders, G.T., 2013. Potential of structural thermal mass for demand-side management in dwellings. Building and environment, Elsevier Science, 64, 187-199, DOI: 10.1016/j.buildenv.2013.03.01010.1016/j.buildenv.2013.03.010
]Search in Google Scholar
[
Snegirev, A.I., Alkhimenko, A.I., 2008. Influence of the short circuit temperature during erection on stresses in load-bearing structures, Engineering and construction journal, Russian, 2, 8-16, https://engstroy.spbstu.ru/userfiles/files/2008/1(2)/01.pdf
]Search in Google Scholar
[
Tariku, F., Kumaran, K., Fazio, P., 2010. Integrated analysis of whole building heat, air and moisture transfer. International Journal of Heat and Mass Transfer, 53(15-16), 3111-3120, DOI: 10.1016/j.ijheatmasstransfer.2010.03.01610.1016/j.ijheatmasstransfer.2010.03.016
]Search in Google Scholar
[
Umnyakova, N.P., 2013. Durability of three-layer walls with brick cladding with a high level of thermal protection. Vestnik MGSU, Russian, 94-100.10.22227/1997-0935.2013.1.94-100
]Search in Google Scholar
[
Viot, H., Sempey, A., Pauly, M., Mora, L., 2015. Comparison of different methods for calculating thermal bridges: Application to wood-frame buildings. Building and environment, Elsevier Science, 93, 339-348, DOI 10.1016/j.buildenv.2015.07.01710.1016/j.buildenv.2015.07.017
]Search in Google Scholar
[
Zhang, Z.L., Wachenfeldt, B.J., 2009. Numerical study on the heat storing capacity of concrete walls with air cavities. Energy and Buildings, Elsevier, 41, 769-773, DOI: 10.1016/j.enbuild.2009.02.01210.1016/j.enbuild.2009.02.012
]Search in Google Scholar
