<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The article is a case study of the use of snapshot observation to analyse the factors causing time losses at selected laser burner stations, and to propose changes that will increase the effective utilization of working time. The purpose of this paper is to determine the best and worst utilization of working time at the examined workplaces, analyse the amount of time lost and identify the causes of losses, and propose solutions that will improve the utilization of working time. According to the snapshot observation, procedure 2 main - work and non-work - time fractions and 10 detailed time fractions in the working day were distinguished, and their percentage share for the analysed workstations was calculated. Analyses of the working day time utilization depending on the type of machines, days of observation, single shifts were done and selected results were averaged. The paper indicates that organizational and technical aspects, as well as the employees’ faults, were the main reasons for time losses. Research has shown that the generally examined group of workstations was characterized by a high utilization level of working time. An unfavourable phenomenon was the ratio of the main time to the auxiliary time, the high share of the maintenance time fraction of the workstations, and incorrect organization of the interoperation transport, low workers motivation, rush, and routine. It was found that further improvement of work efficiency and reduce time losses requires paying attention to the optimization of employees’ working conditions, training, motivation systems, and implementation of lean concept tools and MES/CMMS solutions into production.</p>
</abstract>

The article is a case study of the use of snapshot observation to analyse the factors causing time losses at selected laser burner stations, and to propose changes that will increase the effective utilization of working time. The purpose of this paper is to determine the best and worst utilization of working time at the examined workplaces, analyse the amount of time lost and identify the causes of losses, and propose solutions that will improve the utilization of working time. According to the snapshot observation, procedure 2 main - work and non-work - time fractions and 10 detailed time fractions in the working day were distinguished, and their percentage share for the analysed workstations was calculated. Analyses of the working day time utilization depending on the type of machines, days of observation, single shifts were done and selected results were averaged. The paper indicates that organizational and technical aspects, as well as the employees’ faults, were the main reasons for time losses. Research has shown that the generally examined group of workstations was characterized by a high utilization level of working time. An unfavourable phenomenon was the ratio of the main time to the auxiliary time, the high share of the maintenance time fraction of the workstations, and incorrect organization of the interoperation transport, low workers motivation, rush, and routine. It was found that further improvement of work efficiency and reduce time losses requires paying attention to the optimization of employees’ working conditions, training, motivation systems, and implementation of lean concept tools and MES/CMMS solutions into production.

Analysing the machines working time utilization for improvement purposes

Faculty of Management, Department of Production Engineering and Safety

Production Engineering Archives

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

{"article-title":"Analysing the machines working time utilization for improvement purposes"}

The article is a case study of the use of snapshot observation to analyse the factors causing time losses at selected laser burner stations, and to propose...

Analysing the machines working time utilization for improvement purposes

Publicado en línea: 12 jun 2021

Páginas: 137 - 147

Recibido: 21 abr 2021

Aceptado: 14 jun 2021

DOI: https://doi.org/10.30657/pea.2021.27.18

Palabras clave
work time management, work time study, work time method, snapshot observations, time losses, improvement

© 2021 Krzysztof Knop, published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Analysing the machines working time utilization for improvement purposes

Publicado en línea: 12 jun 2021

Páginas: 137 - 147

Recibido: 21 abr 2021

Aceptado: 14 jun 2021

DOI: https://doi.org/10.30657/pea.2021.27.18

Palabras clavework time management, work time study, work time method, snapshot observations, time losses, improvement

© 2021 Krzysztof Knop, published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Palabras clave
work time management, work time study, work time method, snapshot observations, time losses, improvement