<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The evaluation of wind effect on the regular shape and simple diaphragm buildings and structures due to wind load has been calculated by several international codes and standards where wind gust nature and dynamic effect could not capture. Bangladesh National Building Code (BNBC) provides the tools for engineers to calculate the wind pressures for the design of a regular-shaped structure with a height to width ratio of less than 5.0, a simple diaphragm, and no unusual geometrical irregularity. If these conditions do not satisfy a wind tunnel testing is required. In this study, a comparative study between two codes in Bangladesh (BNBC-2006 and BNBC-2020), and wind tunnel test results are conducted. An investigation is carried out on four typical buildings with variable heights located within Dhaka, Bangladesh. A computational fluid dynamics (CFD) program RWIND is used to calculate the wind loads on buildings and are compared with those obtained by Bangladesh National Building Codes. Storey shear of four different building models is compared. Between BNBC-2006 and BNBC-2020, there is up to a 53% difference in storey shear. Whereas, up to 30% variation in storey shear is observed between the numerical wind tunnel test data and the data calculated using the BNBC-2020 equations. Finally, this study will help in improving BNBC code provisions for wind load calculations.</p>
</abstract>

The evaluation of wind effect on the regular shape and simple diaphragm buildings and structures due to wind load has been calculated by several international codes and standards where wind gust nature and dynamic effect could not capture. Bangladesh National Building Code (BNBC) provides the tools for engineers to calculate the wind pressures for the design of a regular-shaped structure with a height to width ratio of less than 5.0, a simple diaphragm, and no unusual geometrical irregularity. If these conditions do not satisfy a wind tunnel testing is required. In this study, a comparative study between two codes in Bangladesh (BNBC-2006 and BNBC-2020), and wind tunnel test results are conducted. An investigation is carried out on four typical buildings with variable heights located within Dhaka, Bangladesh. A computational fluid dynamics (CFD) program RWIND is used to calculate the wind loads on buildings and are compared with those obtained by Bangladesh National Building Codes. Storey shear of four different building models is compared. Between BNBC-2006 and BNBC-2020, there is up to a 53% difference in storey shear. Whereas, up to 30% variation in storey shear is observed between the numerical wind tunnel test data and the data calculated using the BNBC-2020 equations. Finally, this study will help in improving BNBC code provisions for wind load calculations.

Evaluation of Wind Effects on Buildings Using Design Codes and Numerical Wind Tunnel Tests

Structure and Environment

This work is licensed under the Creative Commons Attribution 3.0 Public License.

The evaluation of wind effect on the regular shape and simple diaphragm buildings and structures due to wind load has been calculated by several international...

Evaluation of Wind Effects on Buildings Using Design Codes and Numerical Wind Tunnel Tests

Publicado en línea: 26 jul 2023

Páginas: 73 - 81

DOI: https://doi.org/10.30540/sae-2023-007

Palabras clave
wind load analysis, wind tunnel test, wind simulation, reinforced cement concrete structure, computational fluid dynamics, Bangladesh National Building Code

© 2023 Imam Hossain et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 3.0 Public License.

Evaluation of Wind Effects on Buildings Using Design Codes and Numerical Wind Tunnel Tests

Publicado en línea: 26 jul 2023

Páginas: 73 - 81

DOI: https://doi.org/10.30540/sae-2023-007

Palabras clavewind load analysis, wind tunnel test, wind simulation, reinforced cement concrete structure, computational fluid dynamics, Bangladesh National Building Code

© 2023 Imam Hossain et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 3.0 Public License.

Palabras clave
wind load analysis, wind tunnel test, wind simulation, reinforced cement concrete structure, computational fluid dynamics, Bangladesh National Building Code