<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>The main disadvantage of horn spark gaps resulting from the blow-out of hot ionised gases in case of lightning impulse and follow currents is discussed for modern and compact DIN rail mounted arresters. The technical problems of fully encapsulated horn spark gaps are revealed. Based on technical specifications, basic calculations for the required arc voltages and the thermal loads were made in advance for dimensioning the arc splitter chamber and the arc area of the spark gap. A method to fully encapsulate such spark gaps is proposed and its efficiency is described based on experiments with different arrangements and loads.</p></abstract>

The main disadvantage of horn spark gaps resulting from the blow-out of hot ionised gases in case of lightning impulse and follow currents is discussed for modern and compact DIN rail mounted arresters. The technical problems of fully encapsulated horn spark gaps are revealed. Based on technical specifications, basic calculations for the required arc voltages and the thermal loads were made in advance for dimensioning the arc splitter chamber and the arc area of the spark gap. A method to fully encapsulate such spark gaps is proposed and its efficiency is described based on experiments with different arrangements and loads.

Basic Problems and Solution of the Encapsulation of a Low-Voltage Spark Gap with Arc Splitter Chamber

Faculty of Electrical Engineering and Information Technology, Slovak University of Technology in Bratislava, Ilkovičova 3, 812 19 Bratislava 1, Slovak Republic

Dehn + Söhne GmbH + Co.KG, Hans-Dehn-Straße 1, D-92318 Neumarkt

Ilmenau University of Technology, Gustav-Kirchhoff-Straße 1, D-98693 Ilmenau

Journal of Electrical Engineering

The main disadvantage of horn spark gaps resulting from the blow-out of hot ionised gases in case of lightning impulse and follow currents is discussed for...

Basic Problems and Solution of the Encapsulation of a Low-Voltage Spark Gap with Arc Splitter Chamber

Publicado en línea: 20 abr 2012

Páginas: 103 - 108

DOI: https://doi.org/10.2478/v10187-012-0015-9

Palabras clave
horn spark gap, arc splitter chamber, extinguisher, methods for encapsulation, follow current limitation

This content is open access.

Basic Problems and Solution of the Encapsulation of a Low-Voltage Spark Gap with Arc Splitter Chamber

Publicado en línea: 20 abr 2012

Páginas: 103 - 108

DOI: https://doi.org/10.2478/v10187-012-0015-9

Palabras clavehorn spark gap, arc splitter chamber, extinguisher, methods for encapsulation, follow current limitation

This content is open access.

Palabras clave
horn spark gap, arc splitter chamber, extinguisher, methods for encapsulation, follow current limitation