[Sapozhnikova, K., Taymanov, R. (2010). Improvement of traceability of widely-defined measurements in the field of humanities. Measurement Science Review, 10 (3), 78-88.10.2478/v10048-010-0014-6]Search in Google Scholar
[Laghrouche, M., Haddab, S., Lotmani, S. Mekdoud, K., Ameur, S. (2010). Low-cost embedded oximeter. Measurement Science Review, 10 (5), 176-179.10.2478/v10048-010-0030-6]Search in Google Scholar
[Hreha, P., Hloch, S., Magurova, D., Valicek, J., Kozak, D., Harnicarova, M., Rakin, M. (2010). Water jet technology used in medicine. Tehnički Vjesnik - Technical Gazette, 17 (2), 237-240.]Search in Google Scholar
[Jevremovic, D., Puskar, T., Budak, I., Vukelic, D., Kojic, V., Egbeer, D., Williams, R. (2012). An RE/RM approach to the design and manufacture of removable partial dentures with a biocompatibility analysis of the F75 Co-Cr SLM alloy. Materiali in Tehnologije - Materials and Technologies, 46 (2), 41-47.]Search in Google Scholar
[Pilipovic, A., Raos, P., Sercer, M. (2011). Experimental testing of quality of polymer parts produced by Laminated Object Manufacturing - LOM. Tehnički Vjesnik - Technical Gazette, 18 (2), 253-260.]Search in Google Scholar
[Todorovic, A., Radovic, K., Grbovic, A., Rudolf, R., Maksimovic, I., Stamenkovic, D. (2010). Stress analysis of a unilateral complex partial denture using the finite-element method. Materiali in Tehnologije - Materials and Technologies, 44 (1), 41-47.]Search in Google Scholar
[Levin, G.G., Vishnyakov, G.N., Loshchilov, K.E., Ibragimov, T.I., Lebedenko I.Y., Tsalikova, N.A. (2010). Modern dental CAD/CAM systems with intraoral 3D profilometers. Measurement Techniques, 53 (3), 321-324.10.1007/s11018-010-9503-0]Search in Google Scholar
[Witkowski, S., Komine, F., Gerds, T. (2006). Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques. Journal of Prosthetic Dentistry, 96 (1), 47-52.10.1016/j.prosdent.2006.05.013]Search in Google Scholar
[Sorensen, J.A. (1990). A standardized method for determination of crown margin fidelity. Journal of Prosthetic Dentistry, 64 (1), 18-24.10.1016/0022-3913(90)90147-5]Search in Google Scholar
[Holmes, J.R., Bayne, S.C., Holland, G.A., Sulik, W.D. (1989). Considerations in measurement of marginal fit. Journal of Prosthetic Dentistry, 62 (4), 405-408.10.1016/0022-3913(89)90170-4]Search in Google Scholar
[Sulaiman, F., Chai, J., Jamelson, L., Wozniak, W. (1997). A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns. International Journal of Prosthodontics, 10 (5), 478-484.]Search in Google Scholar
[Quante, K., Ludwig, K., Kern, M. (2008). Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology. Dental Materials, 24 (10), 1311-1315.10.1016/j.dental.2008.02.011]Search in Google Scholar
[Fonseca, J.C., Henriques, G.E., Sobrinho, L.C., de Goes, M.F. (2003). Stress-relieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium aluminum vanadium copings. Dental Materials, 19 (7), 686-691.10.1016/S0109-5641(03)00014-9]Search in Google Scholar
[Bindl, A., Mormann, W.H. (2003). Clinical and SEM evaluation of all-ceramic chair-side CAD/CAM generated pertial crowns. European Journal of Oral Sciences, 111 (2), 163-169.10.1034/j.1600-0722.2003.00022.x12648269]Search in Google Scholar
[Jevremovic, D.P., Ajdukovic, Z.R., Stankovic, S.D., Radosavljevic, R.D. (2012). Profilometric and SEM analyses of composite surfaces after excess cement removal. Hemijska Industrija, 66 (1), 59-66.10.2298/HEMIND110406069J]Search in Google Scholar
[Reich, S., Wichmann, M., Nkenke, E., Proeschel P. (2005). Clinical fit of all - ceramic three - unit fixed partial dentures, generated with three different CAD/CAM systems. European Journal of Oral Sciences, 113 (2), 174-179.10.1111/j.1600-0722.2004.00197.x]Search in Google Scholar
[Kokubo, Y., Nagayama, Y., Tsunita, M., Ohkubo, C., Fukushima, S., Steyren, P.V. (2005). Clinical marginal and internal gaps of In-Ceram crowns fabricated using the GN- I system. Journal of Oral Rehabilitation, 32 (10), 753-758.10.1111/j.1365-2842.2005.01506.x]Search in Google Scholar
[Mitchell, C.A., Pintado, M.R., Douglas, W.H. (2001). Nondestructive in vitro quantification of crown margins. Journal of Prosthetic Dentistry, 85 (6), 575-584.10.1067/mpr.2001.114268]Search in Google Scholar
[Quintas, A.F., Oliveira, F., Bottino, M.A. (2004). Vertical marginal discrepancy of ceramic copings with different ceramic materials, finis lines, and luting agents: an in vitro evaluation. Journal of Prosthetic Dentistry, 92 (3), 250-257.10.1016/j.prosdent.2004.06.023]Search in Google Scholar
[Nakamura, T., Dei, N., Kojim, T., Wakabayashi, K. (2003). Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crown. International Journal of Prosthodontics, 16 (3), 244-248.]Search in Google Scholar
[Bindl, A., Mormann, W.H. (2005). Marginal and internal fit of all-ceramic CAD/CAM crown-copings on cheamfer preparations. Journal of Oral Rehabilitation, 32 (6), 441-417.10.1111/j.1365-2842.2005.01446.x]Search in Google Scholar
[Nakamura, T., Nonaka, M., Maruyama, T. (2000). In vitro fitting accuracy of copy-milled alumina cores and all-ceramic crowns. International Journal of Prosthodontics, 13 (3), 189-193.]Search in Google Scholar
[Wolfart, S., Wegner, S.M., Al-Halabu, A., Kern, M. (2003). Clinical evaluation of marginal fit of a new experimental all-ceramic system before and after cementation. International Journal of Prosthodontics, 16 (6), 587-592.]Search in Google Scholar
[Ryge, G., Snyder, M. (1973). Evaluating the clinical quality of restorations. Journal of the American Dental Association, 87 (2), 369-377.10.14219/jada.archive.1973.0421]Search in Google Scholar
[Wettstein, F., Sailer, I., Roos, M., Hammerle, C.H.F. (2008). Clinical study of the internal gaps of zirconia and metal frameworks for fixed partial dentures. European Journal of Oral Sciences, 116 (3), 272-279.10.1111/j.1600-0722.2008.00527.x]Search in Google Scholar
[Coli, P., Karlsson, S. (2004). Fit of a new pressure-sintered zirconium dioxide coping. International Journal of Prosthodontics, 17 (1), 59-64.]Search in Google Scholar
[Tinschert, J., Natt, G., Mautsch, W., Spiekermann, H., Anusavice, K.J. (2001). Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system. Operative Dentistry, 26 (4), 367-374.]Search in Google Scholar
[Behr, M., Rosentritt, M., Latzel, D., Kreisler, T. (2001). Comparison of three types of fiber-reinforced composite molar crowns on their fracture resistance and marginal adaptation. Journal of Dentistry, 29 (3), 187-196.10.1016/S0300-5712(01)00007-0]Search in Google Scholar
[Laurent, M., Scheer, P., Dejou, J., Laborde, G. (2008). Clinical evaluation of the marginal fit of cast crowns - validation of the silicone replica method. Journal of Oral Rehabilitation, 35 (2), 116-122.10.1111/j.1365-2842.2003.01203.x18197844]Search in Google Scholar
[Rahme, H.Y., Tehini, G.E., Adib, S.M., Ardo, A.S., Rifai, K.T. (2008). In vitro evaluation of the "replica technique" in the measurement of the fit of Procera crowns. Journal of Contemporary Dental Practice, 9 (2), 25-32.]Search in Google Scholar
[Groten, M., Girthofer, S., Probster, L. (1997). Marginal fit consistency of copy-milled all ceramic crowns during fabrication by light- and scanning-electron-microscopic analysis in vitro. Journal of Oral Rehabilitation, 24 (12), 871-881.10.1046/j.1365-2842.1997.00592.x9467987]Search in Google Scholar
[Todorovic, A., Trifkovic, B., Stamenkovic, D. (2010). Accuracy of ceramic crowns made by optical scanning methods of Cerec® 3D system. Acta Stomatologica Naissi, 26 (62), 977-986.]Search in Google Scholar
[Pelekanos, S., Koumanou, M., Koutayas, S., Zinelis, S., Eliades, G. (2009). Micro-CT evaluation of the marginal fit of different In-Ceram aluminna copings. European Journal of Esthetic Dentistry, 4 (3), 278-292.]Search in Google Scholar