<abstract xmlns="http://www.w3.org/1999/xhtml"><p><italic>Water-lubricated bearings have been applied to support ship screw shafts for over a hundered years.</italic><italic>Development of plastic materials has caused that novel sliding polymers appeared available on the market</italic><italic>and being approved by classification institutions, possible to be applied in shipbuilding. However in the</italic><italic>subject - matter literature there is no reference to application of bearings fitted with metal or ceramic</italic><italic>bushes in shipbuilding. Nevertheless they have important merits such as low resistance to motion, long</italic><italic>service life or stability of form. But some doubts are evoked by their large value of shape elasticity module</italic><italic>which can lead to local stress concentration at the bush edges in the case of non-axiality of bush and shaft</italic><italic>axes. Hence this work has been aimed at the testing of a bearing made of bronze-graphite silter. In the</italic><italic>work is presented a comparison of measurement results of resistance to motion , hydrodynamic pressure</italic><italic>distributions in lubricating film as well as shaft axis trajectories of the bearing, with those made for a typical</italic><italic>elastic polymer bearing. The measurement results have showed high quality of the tested material. In the</italic><italic>opinion of these authors it could be applicable to bearing ship propeller shafts.</italic></p></abstract>

Water-lubricated bearings have been applied to support ship screw shafts for over a hundered years.Development of plastic materials has caused that novel sliding polymers appeared available on the marketand being approved by classification institutions, possible to be applied in shipbuilding. However in thesubject - matter literature there is no reference to application of bearings fitted with metal or ceramicbushes in shipbuilding. Nevertheless they have important merits such as low resistance to motion, longservice life or stability of form. But some doubts are evoked by their large value of shape elasticity modulewhich can lead to local stress concentration at the bush edges in the case of non-axiality of bush and shaftaxes. Hence this work has been aimed at the testing of a bearing made of bronze-graphite silter. In thework is presented a comparison of measurement results of resistance to motion , hydrodynamic pressuredistributions in lubricating film as well as shaft axis trajectories of the bearing, with those made for a typicalelastic polymer bearing. The measurement results have showed high quality of the tested material. In theopinion of these authors it could be applicable to bearing ship propeller shafts.

Assessment of possible application of waterlubricated sintered brass slide bearing for marine propeller shaft

Polish Maritime Research

Water-lubricated bearings have been applied to support ship screw shafts for over a hundered years.Development of plastic materials has caused that novel...

Assessment of possible application of waterlubricated sintered brass slide bearing for marine propeller shaft

Publicado en línea: 26 ene 2013

Páginas: 54 - 61

DOI: https://doi.org/10.2478/v10012-012-0040-4

Palabras clave
bearing, bearing of ship propeller shafts, tribology, water-lubricated bearings

This content is open access.

Assessment of possible application of waterlubricated sintered brass slide bearing for marine propeller shaft

Publicado en línea: 26 ene 2013

Páginas: 54 - 61

DOI: https://doi.org/10.2478/v10012-012-0040-4

Palabras clavebearing, bearing of ship propeller shafts, tribology, water-lubricated bearings

This content is open access.

Palabras clave
bearing, bearing of ship propeller shafts, tribology, water-lubricated bearings