<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The problem of measuring road vehicle’s weight-in-motion (WIM) is important for overload enforcement, road maintenance planning and cargo fleet managing, control of the legal use of the transport infrastructure, road surface protection from the early destruction and for the safety on the roads. The fibre-optic sensors (FOS) functionality is based on the changes in the parameters of the optical signal due to the deformation of the optical fibre under the weight of the crossing vehicle. A fibre-optic sensor responds to the deformation, therefore for WIM measurements it is necessary to estimate the impact area of a wheel on the working surface of the sensor called tyre footprint. This information is used further for the estimation of the vehicle wheel’s speed, contact width, length, and, finally, axle’s weight while in motion. Recorded signals from a truck passing over a group of FOS with various speeds and known weight are used as an input data. The results of the several laboratory and field experiments with FOS, e.g. load characteristics according to the temperature, contact surface width and loading speed impact, are provided here. The method of initial signal deconvolution on symmetric and asymmetric components provides the chance to approximate geometric size of tyre surface footprint as well as calculate weight on each wheel separately. The examples of the estimation of a truck speed, tyre contact surface footprint parameters using FOS signals are discussed in this article.</p></abstract>

The problem of measuring road vehicle’s weight-in-motion (WIM) is important for overload enforcement, road maintenance planning and cargo fleet managing, control of the legal use of the transport infrastructure, road surface protection from the early destruction and for the safety on the roads. The fibre-optic sensors (FOS) functionality is based on the changes in the parameters of the optical signal due to the deformation of the optical fibre under the weight of the crossing vehicle. A fibre-optic sensor responds to the deformation, therefore for WIM measurements it is necessary to estimate the impact area of a wheel on the working surface of the sensor called tyre footprint. This information is used further for the estimation of the vehicle wheel’s speed, contact width, length, and, finally, axle’s weight while in motion. Recorded signals from a truck passing over a group of FOS with various speeds and known weight are used as an input data. The results of the several laboratory and field experiments with FOS, e.g. load characteristics according to the temperature, contact surface width and loading speed impact, are provided here. The method of initial signal deconvolution on symmetric and asymmetric components provides the chance to approximate geometric size of tyre surface footprint as well as calculate weight on each wheel separately. The examples of the estimation of a truck speed, tyre contact surface footprint parameters using FOS signals are discussed in this article.

Weight-in-Motion Estimation Based on Reconstruction of Tyre Footprint’s Geometry by Group of Fibre Optic Sensors

Transport and Telecommunication Institute Lomonosova 1, Riga, LV-1019, Latvia Phone: +371 67100654. Fax: +371 67100535

Transport and Telecommunication Journal

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

The problem of measuring road vehicle’s weight-in-motion (WIM) is important for overload enforcement, road maintenance planning and cargo fleet managing,...

Weight-in-Motion Estimation Based on Reconstruction of Tyre Footprint’s Geometry by Group of Fibre Optic Sensors

Publicado en línea: 25 abr 2014

Páginas: 97 - 110

DOI: https://doi.org/10.2478/ttj-2014-0009

© Transport and Telecommunication Institute

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.