<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this paper, the experimental results of a detonation chamber fed by air from a centrifugal compressor are presented. The detonation chamber was equipped with many different sensors, mostly thermocouples, which were placed in 11 different positions. The distribution of temperature changes along the chamber and radial temperature profile at the outlet are provided. The results here confirm the existence of high mixture stratification. Such mixture stratifications and temperature profiles may be used as an additional chamber wall cooling method. The experiments performed, address key issues regarding the chamber choking problem caused by turbines. The relationship between the turbine performance and detonation chamber are crucial for proper control of turbine jet engine.</p>
</abstract>

In this paper, the experimental results of a detonation chamber fed by air from a centrifugal compressor are presented. The detonation chamber was equipped with many different sensors, mostly thermocouples, which were placed in 11 different positions. The distribution of temperature changes along the chamber and radial temperature profile at the outlet are provided. The results here confirm the existence of high mixture stratification. Such mixture stratifications and temperature profiles may be used as an additional chamber wall cooling method. The experiments performed, address key issues regarding the chamber choking problem caused by turbines. The relationship between the turbine performance and detonation chamber are crucial for proper control of turbine jet engine.

Temperature Measurements in the Detonation Chamber Supplied by Air from Centrifugal Compressor and Gaseous Hydrogen

Institute of Heat Engineering, Faculty of Power and Aeronautical Engineering

Transactions on Aerospace Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In this paper, the experimental results of a detonation chamber fed by air from a centrifugal compressor are presented. The detonation chamber was equipped...

Temperature Measurements in the Detonation Chamber Supplied by Air from Centrifugal Compressor and Gaseous Hydrogen

Publicado en línea: 31 may 2019

Páginas: 7 - 23

DOI: https://doi.org/10.2478/tar-2017-0019

Palabras clave
rotating detonation, RDE engine, temperature measurements

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Temperature Measurements in the Detonation Chamber Supplied by Air from Centrifugal Compressor and Gaseous Hydrogen

Publicado en línea: 31 may 2019

Páginas: 7 - 23

DOI: https://doi.org/10.2478/tar-2017-0019

Palabras claverotating detonation, RDE engine, temperature measurements

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
rotating detonation, RDE engine, temperature measurements