<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Coal ash is a geomaterial with a metastable structure. This type of geomaterial is significantly susceptible to liquefaction as a result of seismic loads. An investigation of ash that is susceptible to liquefaction due to a seismic load can use the CPT penetration test. This method of investigating liquefaction was developed based on numerous penetration tests of sandy or silty–sandy soils and was developed at the Workshop on the Evaluation of Soil Liquefaction Resistance, NCEER, Salk Lake City, Utah, USA, 1996. In the present article, the results of the CPT penetration test conducted at the Rosina ash tailings pond in Žilina in Slovakia, are analyzed using the NCEER methodology. The safety factor for ash liquefaction was expressed based on the penetration resistance values measured in the CPT tests using the ‘LiquefyPro’ software. The safety factor in the liquefaction of the ash sediment was expressed by changing the level of seeping water in the body of the tailings pond, the unit weight of coal ash, and the seismic acceleration.</p>
</abstract>

Coal ash is a geomaterial with a metastable structure. This type of geomaterial is significantly susceptible to liquefaction as a result of seismic loads. An investigation of ash that is susceptible to liquefaction due to a seismic load can use the CPT penetration test. This method of investigating liquefaction was developed based on numerous penetration tests of sandy or silty–sandy soils and was developed at the Workshop on the Evaluation of Soil Liquefaction Resistance, NCEER, Salk Lake City, Utah, USA, 1996. In the present article, the results of the CPT penetration test conducted at the Rosina ash tailings pond in Žilina in Slovakia, are analyzed using the NCEER methodology. The safety factor for ash liquefaction was expressed based on the penetration resistance values measured in the CPT tests using the ‘LiquefyPro’ software. The safety factor in the liquefaction of the ash sediment was expressed by changing the level of seeping water in the body of the tailings pond, the unit weight of coal ash, and the seismic acceleration.

Investigation of the Liquefaction Potential of Coal Ash Due to Seismic Loading

Department of Geotechnics, Slovak University of Technology, Faculty of Civil Engineering

Slovak Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Investigation of the Liquefaction Potential of Coal Ash Due to Seismic Loading"}

Coal ash is a geomaterial with a metastable structure. This type of geomaterial is significantly susceptible to liquefaction as a result of seismic loads. An...

Investigation of the Liquefaction Potential of Coal Ash Due to Seismic Loading

Publicado en línea: 12 jul 2022

Páginas: 38 - 46

DOI: https://doi.org/10.2478/sjce-2022-0013

Palabras clave
Coal ash, Seismic load, Liquefaction, CPT cone penetration test, Safety factor

© 2022 Ivan Slávik, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Investigation of the Liquefaction Potential of Coal Ash Due to Seismic Loading

Publicado en línea: 12 jul 2022

Páginas: 38 - 46

DOI: https://doi.org/10.2478/sjce-2022-0013

Palabras claveCoal ash, Seismic load, Liquefaction, CPT cone penetration test, Safety factor

© 2022 Ivan Slávik, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Coal ash, Seismic load, Liquefaction, CPT cone penetration test, Safety factor