<abstract xmlns="http://www.w3.org/1999/xhtml">

For more than a dozen or so years now, there has been growing interest in the use of modern laser scanning measurement methods in numerous mining operations engaged in underground excavation. However, the simple possession of a scanner does not guarantee satisfactory measurement results. This study sets out the results of scanning mine excavations in an active mine and describes the current guidelines on various aspects of the measurement process. These guidelines were developed on the basis of several hundred measurements carried out over the last dozen or so years.
This study also outlines the typical measurements errors observed over the course of many years. These errors, resulting partly from hardware limitations and partly from human error when planning or actually performing measurements, were an important factor behind the introduction of standards regulating underground measurements.
This study discusses in detail not only scanning that utilises traditional stationary laser scanners but also scanning based on mobile scanners. It also presents possible areas of future technological development in line with global trends.
</abstract>

For more than a dozen or so years now, there has been growing interest in the use of modern laser scanning measurement methods in numerous mining operations engaged in underground excavation. However, the simple possession of a scanner does not guarantee satisfactory measurement results. This study sets out the results of scanning mine excavations in an active mine and describes the current guidelines on various aspects of the measurement process. These guidelines were developed on the basis of several hundred measurements carried out over the last dozen or so years.
This study also outlines the typical measurements errors observed over the course of many years. These errors, resulting partly from hardware limitations and partly from human error when planning or actually performing measurements, were an important factor behind the introduction of standards regulating underground measurements.
This study discusses in detail not only scanning that utilises traditional stationary laser scanners but also scanning based on mobile scanners. It also presents possible areas of future technological development in line with global trends.

Practical Aspects of Using Modern Laser Scanning Techniques for Measuring Mine Excavations

Faculty of Geology, Geophysics and Environmental Protection

Studia Geotechnica et Mechanica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

For more than a dozen or so years now, there has been growing interest in the use of modern laser scanning measurement methods in numerous mining operations...

Practical Aspects of Using Modern Laser Scanning Techniques for Measuring Mine Excavations

Article Category: Original Study

Publicado en línea: 26 jun 2024

Páginas: -

Recibido: 30 mar 2024

Aceptado: 10 may 2024

DOI: https://doi.org/10.2478/sgem-2024-0011

Palabras clave
laser Scanning, excavation geometry, mine survey

© 2024 Adam Agatowski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Practical Aspects of Using Modern Laser Scanning Techniques for Measuring Mine Excavations

Article Category: Original Study

Publicado en línea: 26 jun 2024

Páginas: -

Recibido: 30 mar 2024

Aceptado: 10 may 2024

DOI: https://doi.org/10.2478/sgem-2024-0011

Palabras clavelaser Scanning, excavation geometry, mine survey

© 2024 Adam Agatowski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
laser Scanning, excavation geometry, mine survey