<abstract xmlns="http://www.w3.org/1999/xhtml">

The article presents the alternative use of termite mound soils (TMSs) as full replacement for clay soils in brick production. TMSs from two localities, Jawaj and Sene, in Ethiopia were investigated for bricks production. The TMSs samples contained high SiO2 and Al2O3. The TMSs bricks were fired at different temperatures from 500 to 1,000°C. The obtained mean compressive strengths (σ), 18 and 14 MPa, were observed for bricks made from TMSs from Jawaj and Sene, respectively, at the optimum firing temperature of 700°C. The σ of TMSs bricks decreased as the firing temperature increased above 700°C, while for conventional clay soil brick, the σ increased with temperature beyond 700°C. The water absorptions and saturation coefficients of fired TMSs bricks decreased with increased firing temperature. The TMSs bricks meet the standard specification of dimension tolerance only along the height. All the TMSs bricks made from the two localities were not efflorescent. TMSs from Jawaj and Sene sites can be used as a raw material to replace the long-used clay soils for bricks production as a construction material for houses construction in rural and urban areas.
</abstract>

The article presents the alternative use of termite mound soils (TMSs) as full replacement for clay soils in brick production. TMSs from two localities, Jawaj and Sene, in Ethiopia were investigated for bricks production. The TMSs samples contained high SiO2 and Al2O3. The TMSs bricks were fired at different temperatures from 500 to 1,000°C. The obtained mean compressive strengths (σ), 18 and 14 MPa, were observed for bricks made from TMSs from Jawaj and Sene, respectively, at the optimum firing temperature of 700°C. The σ of TMSs bricks decreased as the firing temperature increased above 700°C, while for conventional clay soil brick, the σ increased with temperature beyond 700°C. The water absorptions and saturation coefficients of fired TMSs bricks decreased with increased firing temperature. The TMSs bricks meet the standard specification of dimension tolerance only along the height. All the TMSs bricks made from the two localities were not efflorescent. TMSs from Jawaj and Sene sites can be used as a raw material to replace the long-used clay soils for bricks production as a construction material for houses construction in rural and urban areas.

Termite Mound Soils for Sustainable Production of Bricks

Wroclaw University of Science and Technology

Studia Geotechnica et Mechanica

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Termite Mound Soils for Sustainable Production of Bricks"}

The article presents the alternative use of termite mound soils (TMSs) as full replacement for clay soils in brick production. TMSs from two localities, Jawaj...

Termite Mound Soils for Sustainable Production of Bricks

Article Category: Original Study

Publicado en línea: 30 jun 2021

Páginas: 142 - 154

Recibido: 22 oct 2020

Aceptado: 09 mar 2021

DOI: https://doi.org/10.2478/sgem-2021-0006

Palabras clave
compressive strengths, chemical composition, firing temperature, sustainable production, termite mound soil

© 2021 Alemu Mosisa Legese et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Termite Mound Soils for Sustainable Production of Bricks

Article Category: Original Study

Publicado en línea: 30 jun 2021

Páginas: 142 - 154

Recibido: 22 oct 2020

Aceptado: 09 mar 2021

DOI: https://doi.org/10.2478/sgem-2021-0006

Palabras clavecompressive strengths, chemical composition, firing temperature, sustainable production, termite mound soil

© 2021 Alemu Mosisa Legese et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Palabras clave
compressive strengths, chemical composition, firing temperature, sustainable production, termite mound soil