<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This study presents the results of calculations of the of thermo consolidation process of porous medium with the rheological Kelvin-Voigt skeleton, obtained numerically with the use of Flex.PDE. It is a continuation of the discussion on the phenomenon of thermal consolidation. A 3D problem considered boils down to solving the problem of the porous column filled with a liquid and treated by applying uniaxial compression load through a porous plate, allowing free flow of liquid from the center. To the sample affected by external lateral pressure. Numerical solution assumes compressing the sample at properly defined boundary conditions. The aim of this study was to describe the influence of external load and temperature gradient in the deformation tests for the case when the lateral surface is a good conductor of heat, and where the lateral surface of the sample does not conduct heat. The results obtained, in the context of further research, can also be used to determine the influence of other parameters of the state and model parameters on the process of thermo poroelasticity of the Biot model with rheological skeleton.</p></abstract>

This study presents the results of calculations of the of thermo consolidation process of porous medium with the rheological Kelvin-Voigt skeleton, obtained numerically with the use of Flex.PDE. It is a continuation of the discussion on the phenomenon of thermal consolidation. A 3D problem considered boils down to solving the problem of the porous column filled with a liquid and treated by applying uniaxial compression load through a porous plate, allowing free flow of liquid from the center. To the sample affected by external lateral pressure. Numerical solution assumes compressing the sample at properly defined boundary conditions. The aim of this study was to describe the influence of external load and temperature gradient in the deformation tests for the case when the lateral surface is a good conductor of heat, and where the lateral surface of the sample does not conduct heat. The results obtained, in the context of further research, can also be used to determine the influence of other parameters of the state and model parameters on the process of thermo poroelasticity of the Biot model with rheological skeleton.

NUMERICAL CALCULATION OF DEFORMATION OF THREE DIMENSIONAL SAMPLE IN TRIAXIAL APPARATUS UNDER EXTERNAL LOAD AND TEMPERATURE FIELD

Institute of Mining, Wrocław University of Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland

Institute of Geotechnics and Hydrotechnics, Wrocław University of Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland

Studia Geotechnica et Mechanica

This study presents the results of calculations of the of thermo consolidation process of porous medium with the rheological Kelvin-Voigt skeleton, obtained...

NUMERICAL CALCULATION OF DEFORMATION OF THREE DIMENSIONAL SAMPLE IN TRIAXIAL APPARATUS UNDER EXTERNAL LOAD AND TEMPERATURE FIELD

Publicado en línea: 14 feb 2014

Páginas: 27 - 39

DOI: https://doi.org/10.2478/sgem-2013-0003

This content is open access.