Cite

[1] Zhao, D., Lu, Z., Zhao, H., Li, X. Y., Wang, B., Liu, P. “A review of active control approaches in stabilizing combustion systems in aerospace industry”, Progress in Aerospace Sciences, 97, pp.35 – 60, 2018. DOI: 10.1016/j.paerosci.2018.01.002Search in Google Scholar

[2] Andrej, C.,Marián, P. Matej, M. “Use of Methane-Free Synthesis Gases as Fuel in an Spark Ignition Combustion Engine”, Strojnícky časopis – Journal of Mechanical Engineering 70(2), pp. 37 – 48, 2020. DOI: 10.2478/scjme-2020-0018Search in Google Scholar

[3] Fougnie, A., Schmitt, T., Ducruix, S. “Analysis and low order modeling of the acoustic damping for high-frequency combustion instabilities prediction in liquid rocket engines”, in space propulsion, 2022. Available at: https://hal.archives-ouvertes.fr/hal-03676560 /document. [Accessed: date (20/08/2022)]Search in Google Scholar

[4] Olgac, N., Zalluhoglu, U., Kammer, A. S. “A new perspective in designing delayed feedback control for thermo-acoustic instabilities (TAI) ”, Combustion Science and Technology 187(5), pp.697 – 720, 2015. DOI: 10.1080/00102202.2014.960924Search in Google Scholar

[5] Zalluhoglu, U., Kammer, A. S., Olgac, N. “Delayed feedback control laws for Rijke tube thermoacoustic instability, synthesis, and experimental validation”, IEEE Transactions on Control Systems Technology 24(5), pp. 1861 – 1868, 2016. DOI: 10.1109/tcst.2015.2512938Search in Google Scholar

[6] Illingworth, S. J., Morgans, A. S. “Adaptive feedback control of combustion instability in annular combustors”, Combustion science and technology 182(2), pp. 143 – 164, 2010. DOI: 10.1080/00102200903258773Search in Google Scholar

[7] Paredes, J. A., Ramesh, R., Obidov, S., Gamba, M., Bernstein, D. “Experimental Investigation of Adaptive Feedback Control on a Dual-Swirl-Stabilized Gas Turbine Model Combustor”, In: AIAA SCITECH 2022 Forum, San Diego, CA & Virtual, pp. 2022 – 2058, 2022. DOI: 10.2514/6.2022-2058.Search in Google Scholar

[8] Machesa, M. G. K., Tartibu, L. K., Tekweme, F. K., Okwu, M. O. “Prediction of oscillatory heat transfer coefficient in heat exchangers of thermo-acoustic systems”, In: ASME International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, USA, pp.59452, p. V008T09A043, 2019.Search in Google Scholar

[9] Ngcukayitobi, M., Sibutha, S., Tartibu, L. K., Bannwart, F. C. “Performance analysis of a two-stage travelling-wave thermo-acoustic engine using Artificial Neural Network”, In : MATEC Web of Conferences 347, EDP Sciences, 2021. DOI: 10.1051 /matecconf/202134700023Search in Google Scholar

[10] Milesich, T., Danko, J., Bucha, J. “Neural Networks-A Way to Increase the Fuel Efficiency of Vehicles”, Strojnícky časopis – Journal of Mechanical Engineering 68(1), pp. 81 – 88, 2018. DOI: 10.2478/scjme-2018-0008Search in Google Scholar

[11] Niederberger, A. S., Fritsche, D., Boulouchos, K., Guzzella, L. “Thermoacoustic Instability Suppression by Gain-Delay and H∞ Controllers Designed for Secondary Fuel Injection”, IEEE transactions on control systems technology 17(5), pp. 1028 – 1042, 2009. DOI: 10.1109/TCST.2008.2004809Search in Google Scholar

[12] Feng, S., Li, J. “H∞ loop-shaping control of azimuthal combustion instabilities in annular combustors. Journal of Low Frequency Noise”, Vibration and Active Control, 40(1), pp.395-412, 2021. DOI: 10.1177/1461348419873455Search in Google Scholar

[13] Yuan, X. C., Glover, K. “Model-based control of thermoacoustic instabilities in partially premixed lean combustion–a design case study”, International Journal of Control 86(11), pp. 2052 – 2066, 2013. DOI: 10.1080/00207179.2013.830337Search in Google Scholar

[14] Norouzi, A., Heidarifar, H., Shahbakhti, M., Koch, C., R.; Borhan, H. “Model Predictive Control of Internal Combustion Engines: A Review and Future Directions ”, Energies 14, pp. 6251, 2022. DOI: 10.3390/en14196251Search in Google Scholar

[15] Yazar, I., Caliskan, F., & Vepa, R. “Model Predictive Control and Controller Parameter Optimisation of Combustion Instabilities”, International Journal of Turbo & Jet-Engines 36(2), pp. 185 – 194, 2019. DOI: 10.1515/tjj-2017-0062Search in Google Scholar

[16] Alsuwian, T., Tayyeb, M., Amin, A. A., Qadir, M. B., Almasabi, S., Jalalah, M. “Design of a Hybrid Fault-Tolerant Control System for Air–Fuel Ratio Control of Internal Combustion Engines Using Genetic Algorithm and Higher-Order Sliding Mode Control”, Energies 15(15), pp. 5666, 2022. DOI: 10.3390/en15155666Search in Google Scholar

[17] Debbah, A., Kherfane, H., Klaiaia, R. “Gas Turbine Aerodynamics Improvement Via a Design of Intelligent Fractional Control”, Strojnícky časopis – Journal of Mechanical Engineering 71(2), pp. 85 – 100, 2021. DOI: 10.2478/scjme-2021-0020Search in Google Scholar

[18] Debbah, A., Kherfane, H. “GA/PSO robust sliding mode control of aerodynamics in gas turbine”, Acta Universitatis Sapientiae, Electrical and Mechanical Engineering 10(1), pp. 42 – 66, 2018. DOI: 10.2478/auseme-2018-0003Search in Google Scholar

[19] Procházka, R., Dittrich, A., Beroun, S., Zvolský, T., Voženílek, R. “The Working Cycle of the Motoring Internal Combustion Engine by a New Method with Cylinder Pressures as in Real Engine Operation”, Strojnícky časopis – Journal of Mechanical Engineering 72(3), pp. 41 – 52, 2022. DOI: 10.2478/scjme-2022-0039Search in Google Scholar

[20] Han, J., Jeong, J. Cho, K., Yu, S. “A Real-Time Combustion Instability Simulation with Comprehensive Thermo-Acoustic Dynamic Model”, Energies 11(4), pp. 883 – 904, 2018. DOI: 10.3390/en11040883Search in Google Scholar

[21] Yang, D., Laera, D., Morgans, A. S. “A systematic study of nonlinear coupling of thermoacoustic modes in annular combustors”, Journal of Sound and Vibration 456, pp. 137 – 161, 2019. DOI: 10.1016/j.jsv.2019.04.025Search in Google Scholar

[22] Euldji, R., al. “Optimal ANFIS-FOPID with back-stepping Controller design for wheeled Mobile Robot control”, Journal of Control Engineering and Applied Informatics 24(2), pp. 57 – 68, 2022. DOI: 10.18280/jesa.550110Search in Google Scholar

[23] Kumar, A., Dharmender, K., Jarial, S. K."A review on artificial bee colony algorithms and their applications to data clustering”, Cybernetics and Information Technologies, 17(3), pp. 3 – 28, 2017. DOI: 10.1515/cait-2017-0027Search in Google Scholar

[24] Han, X., Li, J., Morgans, A. S. “Prediction of combustion instability limit cycle oscillations by combining flame describing function simulations with a thermoacoustic network model”, Combustion and Flame 162(10), pp. 3632 – 3647, 2015. DOI: 10.1016/j.combustflame.2015.06.020Search in Google Scholar

[25] Chribik, A., Minárik, M., Polóni, M. “Effect of Selected Components on Combustion of Methane” Strojnícky časopis – Journal of Mechanical Engineering 71(2), pp. 61 – 68, 2021. DOI: 10.2478/scjme-2021-0018Search in Google Scholar

eISSN:
2450-5471
Idioma:
Inglés
Calendario de la edición:
2 veces al año
Temas de la revista:
Engineering, Mechanical Engineering, Fundamentals of Mechanical Engineering, Mechanics