Dynamic Stiffness Determination of the Rubber Bushing Fem Modelwith Viscoelastic Material Behaviour

[1] Gent, A, N. “Engineering with Rubber: How to Design Rubber Componets”, (Third Edition), Hanser, 2012. ISBN 978344642764810.3139/9783446428713 Search in Google Scholar

[2] ALBERS, A., FISCHER, J., BEHRENDT, M., et al. “Measurement and Interpretation of the Transfer Path of an Acoustic Phenomenon in the Drivetrain of an Electric Vehicle”, ATZ Worldwide 116, pp. 48 – 55, 2014. DOI: 10.1007/s38311-014-0154-7 Abierto DOISearch in Google Scholar

[3] Marbjerg, G. “Noise from Electric Vehicle – Literature Survey Nr. 535”, Vejdirektoratet, 2014. ISBN 978-87-93184-60-2 Search in Google Scholar

[4] “MSC Software Corporation, MSC Marc - Online Help” [online] Available at: https://help.mscsoftware.com/ [Accessed: date (25 3 2022)]. Search in Google Scholar

[5] Popardovský, V. “Optimization of Vehicle Suspension Neural Model”, Proc. of the 22nd International Scientific Conference Transport Means 2018, ISSN 1822-296X, Trakai, Lithuania, pp.1361 – 1364, 2018. Search in Google Scholar

[6] Popardovský, V., Popardovská, E. “Vehicle Suspension Control Based on PID Controller Adapted by Feed-Forward Neural Network”, In: Zeszyty Naukowe Instytutu Pojazdów, Warsaw University of Technology, ISSN 1642-347X, pp.99 – 107, 2017. Search in Google Scholar

[7] Danko, J., Bucha, J., Milesich, T., Magdolen, L., Kevický, I., Minárik, M., Mišković, Z., Mitrović, R. “Dynamic Properties Modeling Analysis of the Rubber-Metal Elements for Electric Drive”, Strojnícky časopis – Journal of Mechanical Engineering 71 (1), pp. 19 – 26, 2021. DOI: 10.2478/scjme-2021-0002 Abierto DOISearch in Google Scholar

[8] Magdolen, L., Danko, J., Milesich, T., Nemec T., Sloboda, K., Bucha, J. “Dual Mass Flywheel Parameter Identification”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 167 – 178, 2021. DOI: 10.2478/scjme-2021-0027 Abierto DOISearch in Google Scholar

[9] Sandell, V. “Extraction of Material Parameters for Static and Dynamic Modeling of Carbon Black Filled Natural Rubbers“, Master Thesis in Material Engineering. Luea University of Technology, pp 111, 2017. Search in Google Scholar

• Conditions for Loss of Stability of an Autonomous Vehicle During a Cornering Manoeuvre
• Experimental Research of Vibrational Properties of a Single-Axle Trailer when Crossing an Individual Road Obstacle
• Test of Oil Filters on Laboratory Test Device
• Measuring the Operating Parameters of Electric Vehicles
• LIII. International Scientific Conference KoKa 2022 September 7 – 9, 2022, Kočovce, Slovak Republic
• Dynamic Stiffness Determination of the Rubber Bushing Fem Modelwith Viscoelastic Material Behaviour
• Influence of Synthesis Gas Composition on Internal Combustion Engine Parameters
• Emission Problems of Vehicles and Advanced Fuels Application
• The Working Cycle of the Motoring Internal Combustion Engine by a New Method with Cylinder Pressures as in Real Engine Operation
• Four-Lobe Blower Performance Assessment
• Prediction of Pulsating Turbine Operation Using 1-D - 3-D Co-Simulation
• Complex Evaluation of Heavy-Duty Truck Hybridization and Electrification Options
• Performance Study of a Developed Rule-Based Control Strategy with Use of an ECMS Optimization Control Algorithm on a Plug-In Hybrid Electric Vehicle
• Investigating the Effect of Rotor Design Changes on Mechanical Losses Due to Rotor-Fluid Interaction