[
[1] Paulech, J., Kutiš, V., Gálik, G., Jakubec, J., Sedlár, T. “Thermo-Hydraulic Behaviour of Coolant in Nuclear Reactor VVER-440 Under Refuelling Conditions”, Strojnícky časopis – Journal of Mechanical Engineering 67 (1), pp. 87 – 92, 2017. DOI: 10.1515/scjme-2017-000910.1515/scjme-2017-0009
]Search in Google Scholar
[
[2] Gužela, Š., Dzianik, F., Juriga, M., Kabát, J. “Shell and Tube Heat Exchanger – the Heat Transfer Area Design Process”, Strojnícky časopis – Journal of Mechanical Engineering 67 (2), pp. 13 – 24, 2017. DOI: 10.1515/scjme-2017-001410.1515/scjme-2017-0014
]Search in Google Scholar
[
[3] Jelemenský, K., Šesták, J., Žitný, R. “Tepelné pochody”, 2. edition, Vydavateľstvo STU v Bratislave, 2004. ISBN 80-227-2109-3 (in Slovak)
]Search in Google Scholar
[
[4] Kumar, R., Kishore, P. S. “Experimental Study of Condensation in a Shell and Tube Heat Exchanger in the Presence of a Noncondensable Gas”, Heat Transfer - Asian Research 46, pp. 511 – 531, 2017. DOI: 10.1002/htj.2122810.1002/htj.21228
]Search in Google Scholar
[
[5] Míka, V. “Základy chemického inženýrství”, SNTL/ALFA, 1981. Číslo 04-605-81, p. 872 (in Slovak)
]Search in Google Scholar
[
[6] Sejč, P., Világoš, T. “Fem Simulation of Thermal Cycles During Laser Welding of Aluminium”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 89 – 94, 2018. DOI: 10.2478/scjme-2018-000910.2478/scjme-2018-0009
]Search in Google Scholar
[
[7] Madlo, V. “Teoretické základy odboru”, Vydavateľstvo STU v Bratislave, 1994, ISBN-80-227-0663-9, p. 313. (in Slovak)
]Search in Google Scholar
[
[8] “VDI Heat Atlas”, Second Edition, Springer-Verlag Berlin Heidelberg, 2010. ISBN 978-3-540-77876-9
]Search in Google Scholar
[
[9] Kupka, D., Koloničný, J. “Mathematical Model of Film-Wise Condensation for Evaluation of Heat Transfer Coefficient”, Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní 56 (2), p. 99 – 107, 2010. ISSN 1210-0471, http://transactions.fs.vsb.cz/2010-2/1787.pdf
]Search in Google Scholar
[
[10] Sola Cervera, J. L., Daniel, A., Hoffmann, K. “Optimization of a Cooling - Condensation Tower”, Chemical Engineering Transactions 69, pp. 865 – 870, 2018. ISBN 978-88-95608-66-2, ISSN 2283-9216, DOI: 10.3303/CET1869145
]Search in Google Scholar
[
[11] Raczka, P., Wójs, K. “Methods of Thermal Calculations for a Condensing Waste-Heat Exchanger”, Chemical and Process Engineering 4, p. 447 – 461, 2014. ISSN 0208-6425, DOI: 10.2478/cpe-2014-003410.2478/cpe-2014-0034
]Search in Google Scholar
[
[12] Romsy, T., Zacha, P., Safarik, P, Frybort, O. “Water evaporation–Condensation cooling system design for Pb-Li17 cold trap”, Fusion Engineering and Design 123, pp. 124 – 128, 2017. DOI: 10.1016/j.fusengdes.2017.04.07410.1016/j.fusengdes.2017.04.074
]Search in Google Scholar
[
[13] Kapilan, N., Manjunath Gowda, M., Manjunath, H. N. “Computational Fluid Dynamics Analysis of an Evaporative Cooling System”, Strojnícky časopis – Journal of Mechanical Engineering 66 (2), pp. 117 – 124, 2016. DOI: 10.1515/scjme-2016-002610.1515/scjme-2016-0026
]Search in Google Scholar
[
[14] Bird, R. B., Stewart, W. E., Lightfoot, E. N. “Transport Phenomena”, John Wile & Sons, Inc., 2002. ISBN-0-471-41077-2, p. 895
]Search in Google Scholar
[
[15] Ditl, P. “Difúzně separační pochody”, Vydavatelství ČVUT, 1996. ISBN-80-01-01439-8, p. 226. (in Czech)
]Search in Google Scholar
[
[16] Šesták, J. “Přenosové jevy II. – Přenos hmoty”, Vydavatelství ČVUT, 1976. Číslo publikace 401-2193, p. 222 (in Czech)
]Search in Google Scholar
[
[17] Šesták, J., Rieger, F. “Přenosové jevy I. – Přenos impulse a tepla”, Vydavatelství ČVUT, 1974. Číslo publikace 401-1868, p. 242 (in Czech)
]Search in Google Scholar
[
[18] Gužela, Š., Dzianik, F. “Correction Factors for Determining the Mass Transfer Coefficients”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 109 – 120, 2021. DOI: 10.2478/scjme-2021-002210.2478/scjme-2021-0022
]Search in Google Scholar
