[
[1] Karpash, M. O., Oliynyk, A. P., Kogut, G. M., Klyun, A. M. “Implications of New Standards on Technical Dianostics and Conrol Implentation on Gas Transmission System Efficiency”, Science and Innovation 15 (6), pp. 73 – 82, 2019. DOI: 10.15407/scine15.06.07510.15407/scine15.06.075
]Search in Google Scholar
[
[2] Aung, N., Yuwono, T. “Computational fluid dynamics simulations of gas-liquid two-phase flow characteristics through a vertical to horizontal right angled elbow”, ASEAN Journal on Science and Technology for Development 30 (1&2), pp. 1 – 16, 2013. DOI: 10.29037/ajstd.34410.29037/ajstd.344
]Search in Google Scholar
[
[3] Toda, M., Kamori, N., Saito, S., Maeda S. “Hydraulic conveying of solids through pipe bends”, J. Chem. Eng. Jpn. 5, pp. 4 – 13, 1972.10.1252/jcej.5.4
]Search in Google Scholar
[
[4] Wood, R., Jones, T., Miles, N., Ganeshalingam, J. “Upstream swirl-induction for reduction of erosion damage from slurries in pipeline bends”, Wear 250 (1-12), pp. 770 – 778, 2001. DOI: 10.1016/S0043-1648(01)00715-310.1016/S0043-1648(01)00715-3
]Search in Google Scholar
[
[5] Smart, J. “Movement of Black powder in gas pipeline”, Pipeline and Gas Journal 10, pp. 82 – 85, 2007.
]Search in Google Scholar
[
[6] Volovetskyi, V. B., Uhrynovskyi, A. V., Doroshenko, Ya. V., Shchyrba, O. M., Stakhmych, Yu. S. “Developing a set of measures to provide maximum hydraulic efficiency of gas gathering pipelines”, Journal of Achievements in Materials and Manufacturing Engineering 101 (1) July, pp. 27 – 41, 2020. DOI: 10.5604/01.3001.0014.408810.5604/01.3001.0014.4088
]Search in Google Scholar
[
[7] Doroshenko, Ya. V., Karpash, O. M., Hozhaiev, B. N. “Study composition of pipeline gas-liquid flows and the influence of harmful impurities in them on the modes of pumping, energy consumption for transportation”, Prospecting and Development of Oil and Gas Fields 4 (73), pp. 35 – 45, 2019. DOI: 10.31471/1993-9973-2019-4(73)-35-4510.31471/1993-9973-2019-4(73)-35-45
]Search in Google Scholar
[
[8] Tarayevs’kyy, O. “Evaluation of circular welds strength capacity with corrosive defects”, Metallurgical and Mining Industry 2013 (3), pp. 61 – 67, 2013.
]Search in Google Scholar
[
[9] Tarayevs’kyy, O. “Influence of main pipelines continuous exploitation on their physical and chemical properties”, Metallurgical and Mining Industry 2013 (3), pp. 68 – 72, 2013.
]Search in Google Scholar
[
[10] Tarayevs’kyy, O. “Key factors determining state of metal pipe during operation of main oil and gas pipeline”, Metallurgical and Mining Industry 7 (2), pp. 62 – 66, 2015.
]Search in Google Scholar
[
[11] Doroshenko, Ya. V., Oliynyk, A. P., Karpash, O. M. “Modeling of stress-strain state of piping systems with erosion and corrosion wear”, Physics and chemistry of solid state 21 (1), pp. 151 – 156, 2020. DOI: 10.15330/pcss.21.1.151-15610.15330/pcss.21.1.151-156
]Search in Google Scholar
[
[12] Shlapak, L. S., Linchevskyi, M. P., Sarkisov, V. O. “On the stress-strain state of the gas compressor pipeline binding of Tarutyne compressor station”, Oil & gas industry of Ukraine 3, pp. 44 – 48, 2014.
]Search in Google Scholar
[
[13] Serediuk, M., Grygorsky, S. “The laws of pressure change in pipelines during cessations of pumping units”, Oil Industry 2, pp. 100 – 104, 2015.
]Search in Google Scholar
[
[14] Serediuk, M., Grygorsky, S. “Experimental study of transient processes in oil pipeline caused by startups of pumping units”, Eastern – European Journal of Enterprise Technologies 5/2 (83), pp. 30 – 36, 2016. DOI: 10.15587/1729-4061.2016.7719010.15587/1729-4061.2016.77190
]Search in Google Scholar
[
[15] Rybitskyi, І. V., Trofimchuk, V. І., Kogut G. М. “Enhancing the efficiency of gas distribution stations operation by selecting the optimal gas pressure and temperature parameters at the station outlet”, Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu 3, pp. 47 – 52, 2020. DOI: 10.33271/nvngu/2020-3/04710.33271/nvngu/2020-3/047
]Search in Google Scholar
[
[16] Melnychenko, Y., Poberezhny, L., Hrudz, V., Zapukhliak, V., Chudyk, I., Dodyk, T. “Determination of preconditions leading to critical stresses in pipeline during lowering”, Lecture Notes in Civil Engineering 102, pp. 241 – 252, 2021. DOI: 10.1007/978-3-030-58073-5_1910.1007/978-3-030-58073-5_19
]Search in Google Scholar
[
[17] Dutta, P., Saha, S., Nandi, N. “Computational study of turbulent flow in pipe bends”, International Journal of Applied Engineering Research 10 (11), pp. 128 – 133, 2015.
]Search in Google Scholar
[
[18] Doroshenko, Ya., Rybitskyi, I. “Investigation of the influence of the gas pipeline tee geometry on hydraulic energy loss of gas pipeline systems”, Eastern-European Journal of Enterprise Technologies 1 (8), pp. 28 – 34, 2020. DOI: 10.15587/1729-4061.2020.19282810.15587/1729-4061.2020.192828
]Search in Google Scholar
[
[19] Abdulwahhab, M., Kumar, N., Dakhil, F. “CFD simulations and flow analysis through a T-junction pipe”, International Journal of Engineering Science and Technology 4 (07), pp. 33 – 44, 2012.
]Search in Google Scholar
[
[20] Zhang, J., Kang, J., Fan, J., Gao, J. “Study on erosion wear of fracturing pipeline under the action of multiphase flow in oil & gas industry”, Journal of Natural Gas Science and Engineering 32, pp. 334 – 346, 2016. DOI: 10.1016/j.jngse.2016.04.05610.1016/j.jngse.2016.04.056
]Search in Google Scholar
[
[21] Doroshenko, Ya., Zapukhliak, V., Grudz, Ya., Poberezhny, L., Hrytsanchuk, A., Popovych, P., Shevchuk O. “Numerical simulation of the stress state of an erosion-worn tee of the main gas pipeline”, Archives of Materials Science and Engineering 101 (2), pp. 63 – 78, 2020. DOI: 10.5604/01.3001.0014.119210.5604/01.3001.0014.1192
]Search in Google Scholar
[
[22] Marie, S., Chapuliot, S., Kayser, Y., Lacire, M., Drubay, B., Barthelet, B., Delliou, P., Rougier, V., Naudin, C., Gilles, P., Triay, M. “French RSE-M and RCC-MR code appendices for flaw analysis: Presentation of the fracture parameters calculation—Part IV: Cracked elbows”, International Journal of Pressure Vessels and Piping 84 (10-11), pp. 659 – 685, 2007. DOI: 10.1016/j.ijpvp.2007.05.00610.1016/j.ijpvp.2007.05.006
]Search in Google Scholar
[
[23] Larin, O. O., Potopalska, K. E. “Estimation of residual strength of pipeline’s elbow with volumetric corrosion defect, which is developing”, Odes’kyi Politechnichnyi Universytet Pratsi 3 (53), pp. 12 – 19, 2017. DOI: 10.15276/opu.3.53.2017.0210.15276/opu.3.53.2017.02
]Search in Google Scholar
[
[24] Doroshenko, Ya. V. “Development of technology for repair of shaped elements of pipeline systems in hard-to-reach places”, Oil and gas power engineering 1 (33), pp. 36 – 46, 2020. DOI: 10.31471/1993-9868-2020-1(33)-36-4610.31471/1993-9868-2020-1(33)-36-46
]Search in Google Scholar
[
[25] Doroshenko, Ya., Zapukhliak, V., Poliarush, K., Stasiuk, R., Bagriy S. “Development of trenchless technology of reconstruction of “Pulling pig P” pipeline communications”, Eastern-European Journal of Enterprise Technologies 2 (1). pp. 28 – 38, 2019. DOI: 10.15587/1729-4061.2019.16435110.15587/1729-4061.2019.164351
]Search in Google Scholar
[
[26] Squires, K., Eaton, J. “Particle response and turbulence modification in isotropic turbulence”, Phys. Fluid 2 (7), pp. 1191 – 1203, 1990. DOI: 10.1063/1.85762010.1063/1.857620
]Search in Google Scholar
[
[27] Hinze, J. O. “Turbulence”, McGraw-Hill, New York, p. 790, 1975.
]Search in Google Scholar
[
[28] Finnie, I., Kabil, Y. “On the formation of surface ripples during erosion”, Wear 8 (1). p. 60 – 69, 1965. DOI: 10.1016/0043-1648(65)90251-610.1016/0043-1648(65)90251-6
]Search in Google Scholar
[
[29] Gallagher, R. H. “Finite element analysis: Fundamentals”, Prentice-Hall, New York, p. 416, 1975.
]Search in Google Scholar
