<abstract xmlns="http://www.w3.org/1999/xhtml">

The object of the work is numerical analysis of the state of stress in the plate with holes made along its diagonal, which was subjected to a plane load. The plate was subjected to biaxial loading both in the direction of the y axis, i.e. Py = +/-100 kN and the z axis, i.e. Pz = +/-100 kN. It was shown that the highest concentration of reduced stress occurred in a plate with two holes in the case of load in the form of pure shear (Py = -100 kN, Pz = 100 kN). The pure shear load case proved to be the least favourable from the point of view of straining the plate with holes.
</abstract>

The object of the work is numerical analysis of the state of stress in the plate with holes made along its diagonal, which was subjected to a plane load. The plate was subjected to biaxial loading both in the direction of the y axis, i.e. Py = +/-100 kN and the z axis, i.e. Pz = +/-100 kN. It was shown that the highest concentration of reduced stress occurred in a plate with two holes in the case of load in the form of pure shear (Py = -100 kN, Pz = 100 kN). The pure shear load case proved to be the least favourable from the point of view of straining the plate with holes.

Stress Distribution in a Plate with a Holes Along the Diagonal Distribution Under Plane Biaxial Load

Faculty of Mechanical Engineering, Department of Mechanics and Machine Design

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The object of the work is numerical analysis of the state of stress in the plate with holes made along its diagonal, which was subjected to a plane load. The...

Stress Distribution in a Plate with a Holes Along the Diagonal Distribution Under Plane Biaxial Load

Publicado en línea: 12 dic 2020

Páginas: 91 - 100

DOI: https://doi.org/10.2478/scjme-2020-0023

Palabras clave
Plate, holes, reduced stresses, stress concentration factor, biaxial load, numerical calculations

© 2020 Konieczny Mateusz et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Stress Distribution in a Plate with a Holes Along the Diagonal Distribution Under Plane Biaxial Load

Publicado en línea: 12 dic 2020

Páginas: 91 - 100

DOI: https://doi.org/10.2478/scjme-2020-0023

Palabras clavePlate, holes, reduced stresses, stress concentration factor, biaxial load, numerical calculations

© 2020 Konieczny Mateusz et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Plate, holes, reduced stresses, stress concentration factor, biaxial load, numerical calculations