<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>Polypropylene/carbon nanotubes (PP/CNTs) nancomposites were prepared with a single screw extruder by adding maleic anhydride-grafted poplypropylene (PP-g-MAH) as compatibilizer to polypropylene (PP) with different amounts of carbon nanotubes (CNTs) in the range of 0.1–0.7 wt.%. Structure and morphology of the prepared samples were examined by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), polarizing light microscopy (PLM) and X-ray diffraction (XRD). The results showed that PP spherulites decreased in size when CNTs were introduced into the polymer. Mechanical properties of the samples were also studied. Tensile tests showed that with increasing amount of CNTs the strain at break decreased whereas the Young’s modulus was improved of 16.41 % to 36.05 % and tensile strength of 36.67 % to 64.70 % compared to pristine PP. The SEM microphotographs showed that majority of the CNTs were dispersed individually and oriented along the shear flow direction.</p></abstract>

Polypropylene/carbon nanotubes (PP/CNTs) nancomposites were prepared with a single screw extruder by adding maleic anhydride-grafted poplypropylene (PP-g-MAH) as compatibilizer to polypropylene (PP) with different amounts of carbon nanotubes (CNTs) in the range of 0.1–0.7 wt.%. Structure and morphology of the prepared samples were examined by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), polarizing light microscopy (PLM) and X-ray diffraction (XRD). The results showed that PP spherulites decreased in size when CNTs were introduced into the polymer. Mechanical properties of the samples were also studied. Tensile tests showed that with increasing amount of CNTs the strain at break decreased whereas the Young’s modulus was improved of 16.41 % to 36.05 % and tensile strength of 36.67 % to 64.70 % compared to pristine PP. The SEM microphotographs showed that majority of the CNTs were dispersed individually and oriented along the shear flow direction.

Structure and tensile properties of polypropylene/carbon nanotubes composites prepared by melt extrusion

College of Material Science and Engineering, Shenyang Ligong University, Shenyang, Liaoning, 110168, China

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Polypropylene/carbon nanotubes (PP/CNTs) nancomposites were prepared with a single screw extruder by adding maleic anhydride-grafted poplypropylene (PP-g-MAH)...

Structure and tensile properties of polypropylene/carbon nanotubes composites prepared by melt extrusion

Publicado en línea: 17 oct 2014

Páginas: 442 - 447

DOI: https://doi.org/10.2478/s13536-013-0198-1

Palabras clave
carbon nanotubes, orientation, nanocomposites, polypropylene, tensile properties

© 2014 Wroclaw University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Structure and tensile properties of polypropylene/carbon nanotubes composites prepared by melt extrusion

Publicado en línea: 17 oct 2014

Páginas: 442 - 447

DOI: https://doi.org/10.2478/s13536-013-0198-1

Palabras clavecarbon nanotubes, orientation, nanocomposites, polypropylene, tensile properties

© 2014 Wroclaw University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
carbon nanotubes, orientation, nanocomposites, polypropylene, tensile properties