<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>The estimation of firing temperature of ceramics using methods based on pre-dose sensitization of the 110°C TL peak of quartz have yielded incoherent results. Recently the fast component of the CW-OSL of quartz has been observed to have pre-dose characteristics similar to that of the 110°C TL peak. The motivation for this study has been to look into the feasibility of this signal, the OSL counter part of pre-dosed TL emission, for the firing temperature identification. The variation in the sensitization ratio of the TL and OSL emissions with different heating temperatures was also utilized to unveil the firing temperature mark of the specimen.</p></abstract>

The estimation of firing temperature of ceramics using methods based on pre-dose sensitization of the 110°C TL peak of quartz have yielded incoherent results. Recently the fast component of the CW-OSL of quartz has been observed to have pre-dose characteristics similar to that of the 110°C TL peak. The motivation for this study has been to look into the feasibility of this signal, the OSL counter part of pre-dosed TL emission, for the firing temperature identification. The variation in the sensitization ratio of the TL and OSL emissions with different heating temperatures was also utilized to unveil the firing temperature mark of the specimen.

An attempt to estimate firing temperature using OSL pre-dose sensitization of quartz

Astrophysical Sciences Division, Bhabha Atomic Research Centre, Mumbai, 400 085, India

Environmental Assessment Division, Bhabha Atomic Research Centre, Mumbai, 400 085, India

Geochronometria

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The estimation of firing temperature of ceramics using methods based on pre-dose sensitization of the 110°C TL peak of quartz have yielded incoherent results....

An attempt to estimate firing temperature using OSL pre-dose sensitization of quartz

Publicado en línea: 19 jun 2011

Páginas: 217 - 222

DOI: https://doi.org/10.2478/s13386-011-0034-5

Palabras clave
TL, OSL, firing, quartz, sensitization

© 2011 Silesian University of Technology, Gliwice, Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

An attempt to estimate firing temperature using OSL pre-dose sensitization of quartz

Publicado en línea: 19 jun 2011

Páginas: 217 - 222

DOI: https://doi.org/10.2478/s13386-011-0034-5

Palabras claveTL, OSL, firing, quartz, sensitization

© 2011 Silesian University of Technology, Gliwice, Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
TL, OSL, firing, quartz, sensitization