<abstract xmlns="http://www.w3.org/1999/xhtml">This study investigates the behaviour of pyrolysis gas, generated by the thermal decomposing of biomass, in a pilot size reactor. The discreet mathematical model, Lattice Boltzmann, has adopted for mathematical simulation of flow of pyrolysis gas across a porous bed of biomass. The effect of permeability, pressure gradient, voidage of bed, density, temperature, and the dynamic viscosity on the mass flow rate of gas is examined by simulating the gas flow across the fixed bed of hardwood. The Darcy equation is used to estimate the flow rate of gas across the fixed bed of hardwood chips. The temperature in the reactor varies from 32 °C to 600 °C. The reactor has an external diameter of 220 mm and the vertical height of 320 mm. Rockwool insulation is used to prevent heat loss across the reactor. The external heating element of 2 kWe was provided to trigger the pyrolysis reaction. The properties of the system have been recorded by the pressure and temperature sensors, which are retrofitted along the periphery of the reactor. The temperature sensors are located at 80 mm apart from each other; whereas the pressure sensor, placed at the bottom circumference of the reactor. The effect of input parameters on the flow properties of gas is also examined to add up the qualitative assessment of the system to biomass pyrolysis. The polytropic equation of gas is found to be <italic>PV</italic>2.051 = <italic>C</italic>, whereas the compressibility of gas varies from 0.0025–0.042 m2·N–1.</abstract>

This study investigates the behaviour of pyrolysis gas, generated by the thermal decomposing of biomass, in a pilot size reactor. The discreet mathematical model, Lattice Boltzmann, has adopted for mathematical simulation of flow of pyrolysis gas across a porous bed of biomass. The effect of permeability, pressure gradient, voidage of bed, density, temperature, and the dynamic viscosity on the mass flow rate of gas is examined by simulating the gas flow across the fixed bed of hardwood. The Darcy equation is used to estimate the flow rate of gas across the fixed bed of hardwood chips. The temperature in the reactor varies from 32 °C to 600 °C. The reactor has an external diameter of 220 mm and the vertical height of 320 mm. Rockwool insulation is used to prevent heat loss across the reactor. The external heating element of 2 kWe was provided to trigger the pyrolysis reaction. The properties of the system have been recorded by the pressure and temperature sensors, which are retrofitted along the periphery of the reactor. The temperature sensors are located at 80 mm apart from each other; whereas the pressure sensor, placed at the bottom circumference of the reactor. The effect of input parameters on the flow properties of gas is also examined to add up the qualitative assessment of the system to biomass pyrolysis. The polytropic equation of gas is found to be PV2.051 = C, whereas the compressibility of gas varies from 0.0025–0.042 m2·N–1.

Mathematical Modelling of Volatile Gas Using Lattice Boltzmann Method

Department of Mathematics, Statistics and Computer Science

Govind Ballabh Pant University of Agriculture and Technology

Environmental and Climate Technologies

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Mathematical Modelling of Volatile Gas Using Lattice Boltzmann Method"}

This study investigates the behaviour of pyrolysis gas, generated by the thermal decomposing of biomass, in a pilot size reactor. The discreet mathematical...

Mathematical Modelling of Volatile Gas Using Lattice Boltzmann Method

Publicado en línea: 13 jul 2020

Páginas: 483 - 500

DOI: https://doi.org/10.2478/rtuect-2020-0030

Palabras clave
Darcy equation, flow properties, hardwood, Lattice Boltzmann method, numerical solution, modelling, pyrolysis gas

© 2020 Alok Dhaundiyal et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Mathematical Modelling of Volatile Gas Using Lattice Boltzmann Method

Publicado en línea: 13 jul 2020

Páginas: 483 - 500

DOI: https://doi.org/10.2478/rtuect-2020-0030

Palabras claveDarcy equation, flow properties, hardwood, Lattice Boltzmann method, numerical solution, modelling, pyrolysis gas

© 2020 Alok Dhaundiyal et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Palabras clave
Darcy equation, flow properties, hardwood, Lattice Boltzmann method, numerical solution, modelling, pyrolysis gas