<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In the process of designing a marine propeller, hydroelasticity effects are neglected in most cases, due to the negligible influence of the blade’s deformation on its hydrodynamic characteristics. However, there are cases where the impact of hydroelasticity is crucial, for example in the case of high skew-back propellers or heavy-loaded composite propellers. Furthermore, the importance of composite propellers is growing due to their wide range of application, for instance in naval ships and unmanned vehicles. Although structural models and two-way fluid-structure interactions are implemented in most commercial CFD solvers, their relevance to the design process is severely limited due to the high computational cost for a single iteration. An effective solution would therefore be to implement a two-way fluid-structure interaction model in the lifting surface software, which is commonly accepted as a design tool due to its relatively low computational time and its applicability to multi-criteria optimisation. This paper presents the results of hydrodynamic analyses of an elastic propeller carried out using in-house software based on the lifting surface flow model, and extended with the FEM model for the blade structure. The results are compared with experimental measurements and computational analyses with the commercial RANS solver STAR-CCM+.</p>
</abstract>

In the process of designing a marine propeller, hydroelasticity effects are neglected in most cases, due to the negligible influence of the blade’s deformation on its hydrodynamic characteristics. However, there are cases where the impact of hydroelasticity is crucial, for example in the case of high skew-back propellers or heavy-loaded composite propellers. Furthermore, the importance of composite propellers is growing due to their wide range of application, for instance in naval ships and unmanned vehicles. Although structural models and two-way fluid-structure interactions are implemented in most commercial CFD solvers, their relevance to the design process is severely limited due to the high computational cost for a single iteration. An effective solution would therefore be to implement a two-way fluid-structure interaction model in the lifting surface software, which is commonly accepted as a design tool due to its relatively low computational time and its applicability to multi-criteria optimisation. This paper presents the results of hydrodynamic analyses of an elastic propeller carried out using in-house software based on the lifting surface flow model, and extended with the FEM model for the blade structure. The results are compared with experimental measurements and computational analyses with the commercial RANS solver STAR-CCM+.

Experimental Validation of an FEM Model Based on Lifting Theory Applied to Propeller Design Software

Maritime Advanced Research Centre(CTO S.A.)

Polish Maritime Research

This work is licensed under the Creative Commons Attribution 4.0 International License.

In the process of designing a marine propeller, hydroelasticity effects are neglected in most cases, due to the negligible influence of the blade’s deformation...

Experimental Validation of an FEM Model Based on Lifting Theory Applied to Propeller Design Software

Publicado en línea: 22 jun 2024

Páginas: 67 - 76

DOI: https://doi.org/10.2478/pomr-2024-0022

Palabras clave
scale model tests, CFD, marine propeller, fluid-structure interaction

© 2024 Andrzej Grządziela et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Experimental Validation of an FEM Model Based on Lifting Theory Applied to Propeller Design Software

Publicado en línea: 22 jun 2024

Páginas: 67 - 76

DOI: https://doi.org/10.2478/pomr-2024-0022

Palabras clavescale model tests, CFD, marine propeller, fluid-structure interaction

© 2024 Andrzej Grządziela et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Palabras clave
scale model tests, CFD, marine propeller, fluid-structure interaction