<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Wind energy is a clean and renewable source of energy. This study seeks to explore the potential for utilising wind power for merchant ships. A new type of Flettner rotor (rotating cylinder) mounted on the superstructure of a ship is proposed and numerically simulated. The construction and installation of the rotating cylinder is designed and a numerical simulation of the ship-mounted cylinder is carried out, using the commercially available CFD code Ansys Fluent to obtain parameters such as lift and drag coefficient of the cylinder in different conditions. Specifically, it is found that the cylinder type superstructure can play a certain role in reducing the effect of friction by comparing traditional and cylindrical superstructures; the rotating cylinder can generate auxiliary thrust for the ship. After analysis, the wind speed around the cylinder and spin ratio will have a direct influence on its thrust effect; there is an inflection point in the lift coefficient with the increase of α; the thrust coefficient (8.63) reaches the maximum environmental wind speed at 10 m/s and spin ratio is 2.5. For the rotating cylinder, the greater the environmental wind, the greater the thrust contribution generated under the same spin ratio conditions. The maximum thrust can reach 750,000 N; the cylinder’s auxiliary propulsion contribution shows a better advantage in α = 2.0. The effective power generated by the cylinder reaches a maximum of 2,240 kW for environmental wind speed = 20 m/s and α = 1.0.</p>
</abstract>

Wind energy is a clean and renewable source of energy. This study seeks to explore the potential for utilising wind power for merchant ships. A new type of Flettner rotor (rotating cylinder) mounted on the superstructure of a ship is proposed and numerically simulated. The construction and installation of the rotating cylinder is designed and a numerical simulation of the ship-mounted cylinder is carried out, using the commercially available CFD code Ansys Fluent to obtain parameters such as lift and drag coefficient of the cylinder in different conditions. Specifically, it is found that the cylinder type superstructure can play a certain role in reducing the effect of friction by comparing traditional and cylindrical superstructures; the rotating cylinder can generate auxiliary thrust for the ship. After analysis, the wind speed around the cylinder and spin ratio will have a direct influence on its thrust effect; there is an inflection point in the lift coefficient with the increase of α; the thrust coefficient (8.63) reaches the maximum environmental wind speed at 10 m/s and spin ratio is 2.5. For the rotating cylinder, the greater the environmental wind, the greater the thrust contribution generated under the same spin ratio conditions. The maximum thrust can reach 750,000 N; the cylinder’s auxiliary propulsion contribution shows a better advantage in α = 2.0. The effective power generated by the cylinder reaches a maximum of 2,240 kW for environmental wind speed = 20 m/s and α = 1.0.

Study of a New Type of Flettner Rotor in Merchant Ships

College of Electromechanical Engineering, Qingdao University of Science and Technology

Polish Maritime Research

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Study of a New Type of Flettner Rotor in Merchant Ships"}

Wind energy is a clean and renewable source of energy. This study seeks to explore the potential for utilising wind power for merchant ships. A new type of...

Study of a New Type of Flettner Rotor in Merchant Ships

Publicado en línea: 30 abr 2021

Páginas: 28 - 41

DOI: https://doi.org/10.2478/pomr-2021-0003

Palabras clave
Ship propulsion, Flettner rotor, Wind energy, Rotating cylinder, Numerical simulation

© 2021 Boyang Li et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Study of a New Type of Flettner Rotor in Merchant Ships

Publicado en línea: 30 abr 2021

Páginas: 28 - 41

DOI: https://doi.org/10.2478/pomr-2021-0003

Palabras claveShip propulsion, Flettner rotor, Wind energy, Rotating cylinder, Numerical simulation

© 2021 Boyang Li et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Palabras clave
Ship propulsion, Flettner rotor, Wind energy, Rotating cylinder, Numerical simulation