<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This paper investigates the effect of separated exhaust expansion chamber parameters on pressure oscillations in spark-ignited internal combustion (IC) gasoline engines. It is known that exhaust expansion chambers are becoming increasingly more popular among both – original equipment (OE) and aftermarket equipment (AE) exhaust system manufacturers for performance-oriented motorcycles equipped with mainly single cylinder engines, but the companies are reluctant to reveal any detailed principles of operation of the mentioned expansion chambers. The subject of this research is the type of expansion chamber (separate) as used on performance-oriented motorcycles, particularly its’ effect on exhaust pressure pulsations as different chamber volumes, locations and passage sizes are tested. Time-dependent computational fluid dynamics (CFD) analysis was carried out in Solidworks Flow Simulation environment on a simplified exhaust header pipe model imitating engine operation at full load and steady speed. Honda CRF450R motorcycle engine was used as the example and fully defined using a 1D engine performance calculator software to determine the combustion chamber pressure and exhaust valve lift at any given crankshaft position. Volume flow rate of exhaust gasses at the header pipe inlet was calculated based on engine parameters and operating speed. The average pressure values with respect to physical time were measured and graphed across the header pipe inlet cross-section. Eight different header pipe and exhaust expansion chamber combinations were modelled, tested, and results compared at low, medium and high engine speeds. It was found that the presence of exhaust expansion chamber tends to dampen the amplitude and decrease the frequency of pressure oscillations generated at the opening of the exhaust valve(s). Observations show that the addition of an expansion chamber as per design of performance-oriented motorcycles helps to decrease the negative effect of engine tuning while also dampening the positive effect.</p></abstract>

This paper investigates the effect of separated exhaust expansion chamber parameters on pressure oscillations in spark-ignited internal combustion (IC) gasoline engines. It is known that exhaust expansion chambers are becoming increasingly more popular among both – original equipment (OE) and aftermarket equipment (AE) exhaust system manufacturers for performance-oriented motorcycles equipped with mainly single cylinder engines, but the companies are reluctant to reveal any detailed principles of operation of the mentioned expansion chambers. The subject of this research is the type of expansion chamber (separate) as used on performance-oriented motorcycles, particularly its’ effect on exhaust pressure pulsations as different chamber volumes, locations and passage sizes are tested. Time-dependent computational fluid dynamics (CFD) analysis was carried out in Solidworks Flow Simulation environment on a simplified exhaust header pipe model imitating engine operation at full load and steady speed. Honda CRF450R motorcycle engine was used as the example and fully defined using a 1D engine performance calculator software to determine the combustion chamber pressure and exhaust valve lift at any given crankshaft position. Volume flow rate of exhaust gasses at the header pipe inlet was calculated based on engine parameters and operating speed. The average pressure values with respect to physical time were measured and graphed across the header pipe inlet cross-section. Eight different header pipe and exhaust expansion chamber combinations were modelled, tested, and results compared at low, medium and high engine speeds. It was found that the presence of exhaust expansion chamber tends to dampen the amplitude and decrease the frequency of pressure oscillations generated at the opening of the exhaust valve(s). Observations show that the addition of an expansion chamber as per design of performance-oriented motorcycles helps to decrease the negative effect of engine tuning while also dampening the positive effect.

The Effect of separated Expansion Chamber Parameters on Exhaust Pressure Oscillations in Single Cylinder Motorcycle Engine

Latvia University of Life Sciences and Technologies

Rural Sustainability Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

This paper investigates the effect of separated exhaust expansion chamber parameters on pressure oscillations in spark-ignited internal combustion (IC)...

The Effect of separated Expansion Chamber Parameters on Exhaust Pressure Oscillations in Single Cylinder Motorcycle Engine

Publicado en línea: 31 jul 2020

Páginas: 42 - 51

Recibido: 15 abr 2020

Aceptado: 25 jun 2020

DOI: https://doi.org/10.2478/plua-2020-0006

Palabras clave
Computational Fluid Dynamics, Flow Simulation, Exhaust System, Expansion Chamber

© 2020 Kārlis Banis, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Effect of separated Expansion Chamber Parameters on Exhaust Pressure Oscillations in Single Cylinder Motorcycle Engine

Publicado en línea: 31 jul 2020

Páginas: 42 - 51

Recibido: 15 abr 2020

Aceptado: 25 jun 2020

DOI: https://doi.org/10.2478/plua-2020-0006

Palabras claveComputational Fluid Dynamics, Flow Simulation, Exhaust System, Expansion Chamber

© 2020 Kārlis Banis, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Computational Fluid Dynamics, Flow Simulation, Exhaust System, Expansion Chamber