<abstract xmlns="http://www.w3.org/1999/xhtml"> This paper presents the results of study on structural parameters (particle size, surface area, pore volume) and the sorption ability of mechanically and thermally activated sodium bicarbonate. The sorption ability of the modified sorbent was evaluated by: partial and overall SO2 removal efficiency, conversion rate, normalized stoichiometric ratio (NSR). Sodium bicarbonate was mechanically activated by various grinding techniques, using three types of mills: fluid bed opposed jet mill, fine impact mill and electromagnetic mill, differing in grinding technology. Grounded sorbent was thermally activated, what caused a significant development of surface area. During the studies of SO2 sorption, a model gas with a temperature of 300°C, of composition: sulfur dioxide at a concentration of 6292 mg/mn3, oxygen, carbon dioxide and nitrogen as a carrier gas, was used. The best development of surface area and the highest SO2 removal efficiency was obtained for the sorbent treated by electromagnetic grinding, with simultaneous high conversion rate.</abstract>

This paper presents the results of study on structural parameters (particle size, surface area, pore volume) and the sorption ability of mechanically and thermally activated sodium bicarbonate. The sorption ability of the modified sorbent was evaluated by: partial and overall SO2 removal efficiency, conversion rate, normalized stoichiometric ratio (NSR). Sodium bicarbonate was mechanically activated by various grinding techniques, using three types of mills: fluid bed opposed jet mill, fine impact mill and electromagnetic mill, differing in grinding technology. Grounded sorbent was thermally activated, what caused a significant development of surface area. During the studies of SO2 sorption, a model gas with a temperature of 300°C, of composition: sulfur dioxide at a concentration of 6292 mg/mn3, oxygen, carbon dioxide and nitrogen as a carrier gas, was used. The best development of surface area and the highest SO2 removal efficiency was obtained for the sorbent treated by electromagnetic grinding, with simultaneous high conversion rate.

Flue Gas Desulfurization by Mechanically and Thermally Activated Sodium Bicarbonate

Instytut Nawozów Sztucznych, Oddział Chemii Nieorganicznej „IChN” w Gliwicach, ul. Sowińskiego 11, 44-101 Gliwice, Poland

Instytut Zaawansowanych Technologii Energetycznych, Wydział Inżynierii Środowiska i Biotechnologii, Politechnika Częstochowska, ul. J.H. Dąbrowskiego 73, 42-200 Częstochowa, Poland

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

This paper presents the results of study on structural parameters (particle size, surface area, pore volume) and the sorption ability of mechanically and...

Flue Gas Desulfurization by Mechanically and Thermally Activated Sodium Bicarbonate

Publicado en línea: 03 oct 2014

Páginas: 56 - 62

DOI: https://doi.org/10.2478/pjct-2014-0051

Palabras clave
flue gas desulfurization, sodium bicarbonate, surface area, conversion rate

© by Arkadiusz Szymanek

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Flue Gas Desulfurization by Mechanically and Thermally Activated Sodium Bicarbonate

Publicado en línea: 03 oct 2014

Páginas: 56 - 62

DOI: https://doi.org/10.2478/pjct-2014-0051

Palabras claveflue gas desulfurization, sodium bicarbonate, surface area, conversion rate

© by Arkadiusz Szymanek

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
flue gas desulfurization, sodium bicarbonate, surface area, conversion rate