<abstract xmlns="http://www.w3.org/1999/xhtml">
<p>Minimisation of AC grid side input power factor angle for a ‘matrix converter (MC)’ improves the efficiency of the grid. Input volt-ampere requirement is minimum if the current drawn by the ‘MC’ is sinusoidal and input displacement power factor (IDPF) is unity. A MC is inherently capable of maintaining a unity displacement power factor (UDPF) angle at its input terminals. However, the input currents drawn from the grid are not sinusoidal. The high-frequency ripples are suppressed by input current filters (ICFs).These filters additionally introduce a leading phase angle for the current which varies with the loading. This phase lead can be compensated by adjusting the angle between the input current space vector and the input voltage space vector of the MC. The computation of this adjustment angle depends on the estimation of power losses in the switching devices. A simple method is proposed in this paper to estimate the switching losses without measuring device voltages and currents using the perturbation technique. The perturbation logic depends on input current, instantaneous active and reactive power computed at regular intervals of time. The proposed method effectively minimises the IDPF angle very close to zero. The experimental results are included for validation,</p>
</abstract>

Minimisation of AC grid side input power factor angle for a ‘matrix converter (MC)’ improves the efficiency of the grid. Input volt-ampere requirement is minimum if the current drawn by the ‘MC’ is sinusoidal and input displacement power factor (IDPF) is unity. A MC is inherently capable of maintaining a unity displacement power factor (UDPF) angle at its input terminals. However, the input currents drawn from the grid are not sinusoidal. The high-frequency ripples are suppressed by input current filters (ICFs).These filters additionally introduce a leading phase angle for the current which varies with the loading. This phase lead can be compensated by adjusting the angle between the input current space vector and the input voltage space vector of the MC. The computation of this adjustment angle depends on the estimation of power losses in the switching devices. A simple method is proposed in this paper to estimate the switching losses without measuring device voltages and currents using the perturbation technique. The perturbation logic depends on input current, instantaneous active and reactive power computed at regular intervals of time. The proposed method effectively minimises the IDPF angle very close to zero. The experimental results are included for validation,

Minimisation of AC Grid Side Input Power Factor Angle for Three-phase AC to Three-phase AC Matrix Converter under Varying Load

Electrical Engineering Department, Indian Institute of Engineering Science and Technology

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution 4.0 International License.

Minimisation of AC grid side input power factor angle for a ‘matrix converter (MC)’ improves the efficiency of the grid. Input volt-ampere requirement is...

Minimisation of AC Grid Side Input Power Factor Angle for Three-phase AC to Three-phase AC Matrix Converter under Varying Load

Publicado en línea: 26 mar 2024

Páginas: 205 - 219

Recibido: 22 dic 2023

Aceptado: 29 feb 2024

DOI: https://doi.org/10.2478/pead-2024-0014

Palabras clave
matrix converter, input current filter, input power factor angle, input displacement factor, switching losses

© 2024 Abhinandan Basak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Minimisation of AC Grid Side Input Power Factor Angle for Three-phase AC to Three-phase AC Matrix Converter under Varying Load

Publicado en línea: 26 mar 2024

Páginas: 205 - 219

Recibido: 22 dic 2023

Aceptado: 29 feb 2024

DOI: https://doi.org/10.2478/pead-2024-0014

Palabras clavematrix converter, input current filter, input power factor angle, input displacement factor, switching losses

© 2024 Abhinandan Basak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Palabras clave
matrix converter, input current filter, input power factor angle, input displacement factor, switching losses