<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The core of most power electronic systems involving DC/AC conversion is a voltage source inverter (VSI) that runs on some pulsewidth modulation (PWM) strategy. Numerous PWM techniques have been reported in the literature over the past few decades, each having its own merits and limitations. This paper reviews some selected areas of two-level PWM VSI, namely proper utilisation of the DC bus without deteriorating the quality of the output waveform, switching-loss reduction in the linear and over-modulation zones, common-mode voltage and PWM strategies for its reduction or elimination, distortion of the output voltage owing to dead time, and its compensation. These phenomena are explained in brief, followed by discussions on different research works relevant to these areas, and their advantages and disadvantages. Finally, the paper shows prospective directions in which research may continue in these areas in future.</p>
</abstract>

The core of most power electronic systems involving DC/AC conversion is a voltage source inverter (VSI) that runs on some pulsewidth modulation (PWM) strategy. Numerous PWM techniques have been reported in the literature over the past few decades, each having its own merits and limitations. This paper reviews some selected areas of two-level PWM VSI, namely proper utilisation of the DC bus without deteriorating the quality of the output waveform, switching-loss reduction in the linear and over-modulation zones, common-mode voltage and PWM strategies for its reduction or elimination, distortion of the output voltage owing to dead time, and its compensation. These phenomena are explained in brief, followed by discussions on different research works relevant to these areas, and their advantages and disadvantages. Finally, the paper shows prospective directions in which research may continue in these areas in future.

Pulse-width Modulation Techniques in Two-level Voltage Source Inverters – State of the Art and Future Perspectives

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The core of most power electronic systems involving DC/AC conversion is a voltage source inverter (VSI) that runs on some pulsewidth modulation (PWM) strategy....

Pulse-width Modulation Techniques in Two-level Voltage Source Inverters – State of the Art and Future Perspectives

Publicado en línea: 01 nov 2023

Páginas: 335 - 367

Recibido: 16 jun 2023

Aceptado: 16 sept 2023

DOI: https://doi.org/10.2478/pead-2023-0023

Palabras clave
carrier-based PWM, common-mode voltage, DC-bus utilisation, space-vector PWM, dead-time distortion

© 2023 Dipankar Chattejee et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Pulse-width Modulation Techniques in Two-level Voltage Source Inverters – State of the Art and Future Perspectives

Publicado en línea: 01 nov 2023

Páginas: 335 - 367

Recibido: 16 jun 2023

Aceptado: 16 sept 2023

DOI: https://doi.org/10.2478/pead-2023-0023

Palabras clavecarrier-based PWM, common-mode voltage, DC-bus utilisation, space-vector PWM, dead-time distortion

© 2023 Dipankar Chattejee et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
carrier-based PWM, common-mode voltage, DC-bus utilisation, space-vector PWM, dead-time distortion