<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this paper, an approach for a two-and-half-dimensional (2.5D) finite element method (FEM)-based analysis, or quasi-three-dimensional (3D) FEM analysis, of an axial flux machine is discussed. By cutting the 3D model laterally and thereby creating cylindrical surface cuts, the 3D model can be split into several cylindrical surfaces. Transforming those cylindrical cuts into planes leads to a layer-based two-dimensional (2D) model with different radii for each layer. By integrating over all lateral surface cuts, the results for the entire axial flux machine can be determined. In comparison to the simulation of a full 3D FEM model, the simulation of the proposed 2.5D model is much faster. To validate the approach, the two main types of axial flux machines are simulated with both 3D-FEM-based model and 2.5D-FEM-based approach, and the results are presented in this paper.</p>
</abstract>

In this paper, an approach for a two-and-half-dimensional (2.5D) finite element method (FEM)-based analysis, or quasi-three-dimensional (3D) FEM analysis, of an axial flux machine is discussed. By cutting the 3D model laterally and thereby creating cylindrical surface cuts, the 3D model can be split into several cylindrical surfaces. Transforming those cylindrical cuts into planes leads to a layer-based two-dimensional (2D) model with different radii for each layer. By integrating over all lateral surface cuts, the results for the entire axial flux machine can be determined. In comparison to the simulation of a full 3D FEM model, the simulation of the proposed 2.5D model is much faster. To validate the approach, the two main types of axial flux machines are simulated with both 3D-FEM-based model and 2.5D-FEM-based approach, and the results are presented in this paper.

Simulation Time Reduction with 2.5D FEM Analysis for Axial Flux Machines

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Simulation Time Reduction with 2.5D FEM Analysis for Axial Flux Machines"}

In this paper, an approach for a two-and-half-dimensional (2.5D) finite element method (FEM)-based analysis, or quasi-three-dimensional (3D) FEM analysis, of...

Simulation Time Reduction with 2.5D FEM Analysis for Axial Flux Machines

Publicado en línea: 26 mar 2023

Páginas: 100 - 108

Recibido: 08 ene 2023

Aceptado: 06 mar 2023

DOI: https://doi.org/10.2478/pead-2023-0008

Palabras clave
axial flux machine, FEM analysis, model reduction, 2.5D FEM, quasi-three-dimensional FEM

© 2023 Mike Königs et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Simulation Time Reduction with 2.5D FEM Analysis for Axial Flux Machines

Publicado en línea: 26 mar 2023

Páginas: 100 - 108

Recibido: 08 ene 2023

Aceptado: 06 mar 2023

DOI: https://doi.org/10.2478/pead-2023-0008

Palabras claveaxial flux machine, FEM analysis, model reduction, 2.5D FEM, quasi-three-dimensional FEM

© 2023 Mike Königs et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
axial flux machine, FEM analysis, model reduction, 2.5D FEM, quasi-three-dimensional FEM