<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper is focused on increasing the power quality of Unique Macaroni factory, located in Bahir Dar Town. Necessary data have been collected from the factory and the collected data are analysed. Based on the analysis of data, it is found that the factory working power factor is low and hovering around 0.7125. Voltage variations are up to 9.09%, average voltage unbalance is 2.2% and total harmonic distortion (THD) of load currents and voltage are 24.17% and 10.16%, respectively. Harmonic components have existed in the power distribution system of the factory. Based on the analysis of power quality problem in the factory, distribution static compensator (DSTATCOM) and its control system have been designed to boost power quality of the factory and the results are obtained by generating simulations using Matlab software. It is observed from outputs of the Matlab simulations that DSTATCOM can improve the power quality of the factory. Generally, the shape of the waveform of load voltage and current is improved and THD level of load voltage is minimised to 1.55% and load current THD level is 7.09%. The reactive power needed by the loads (442 kVAr) is almost provided by the DSTATCOM, so reactive power from source supply is very small such as 22 kVAr so that the power factor of the source tends to unity.</p>
</abstract>

This paper is focused on increasing the power quality of Unique Macaroni factory, located in Bahir Dar Town. Necessary data have been collected from the factory and the collected data are analysed. Based on the analysis of data, it is found that the factory working power factor is low and hovering around 0.7125. Voltage variations are up to 9.09%, average voltage unbalance is 2.2% and total harmonic distortion (THD) of load currents and voltage are 24.17% and 10.16%, respectively. Harmonic components have existed in the power distribution system of the factory. Based on the analysis of power quality problem in the factory, distribution static compensator (DSTATCOM) and its control system have been designed to boost power quality of the factory and the results are obtained by generating simulations using Matlab software. It is observed from outputs of the Matlab simulations that DSTATCOM can improve the power quality of the factory. Generally, the shape of the waveform of load voltage and current is improved and THD level of load voltage is minimised to 1.55% and load current THD level is 7.09%. The reactive power needed by the loads (442 kVAr) is almost provided by the DSTATCOM, so reactive power from source supply is very small such as 22 kVAr so that the power factor of the source tends to unity.

Power Quality Enhancement Using DSTATCOM in Industry Plants

Department of Electrical and Computer Engineering

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Power Quality Enhancement Using DSTATCOM in Industry Plants"}

This paper is focused on increasing the power quality of Unique Macaroni factory, located in Bahir Dar Town. Necessary data have been collected from the...

Power Quality Enhancement Using DSTATCOM in Industry Plants

Publicado en línea: 21 dic 2020

Páginas: 157 - 175

Recibido: 22 sept 2020

Aceptado: 08 nov 2020

DOI: https://doi.org/10.2478/pead-2020-0012

Palabras clave
power quality, power quality problems, DSTATCOM, Matlab/Simulink

© 2020 Atinkut Bayu, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Power Quality Enhancement Using DSTATCOM in Industry Plants

Publicado en línea: 21 dic 2020

Páginas: 157 - 175

Recibido: 22 sept 2020

Aceptado: 08 nov 2020

DOI: https://doi.org/10.2478/pead-2020-0012

Palabras clavepower quality, power quality problems, DSTATCOM, Matlab/Simulink

© 2020 Atinkut Bayu, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
power quality, power quality problems, DSTATCOM, Matlab/Simulink