<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Induction machines have of late become the most popular workhorses in the industry replacing DC machines because of their advantages, such as reduced cost, reliability and the absence of commutators, which make them adapt to unfavourable conditions with lower maintenance requirement. However, higher-order models of AC machines, nonlinearities in model equations, uncertainties in parameters and load disturbances make induction motors difficult to control than that of DC motors. In this paper, a robust control strategy considering the recent advances in technology is proposed employing input-output feedback linearization for the exact decoupling of electromagnetic torque and rotor flux using fractional-order sliding mode controller (SMC) for the outer speed loop. The sliding mode observer is also designed to extract the rotor flux from the DC input voltage of the inverter and stator current measurements. Finally, a comparison between the commonly used proportional integral and derivative (PID) controller and the proposed fractional-order SMCs is made and the conclusion is reached.</p>
</abstract>

Induction machines have of late become the most popular workhorses in the industry replacing DC machines because of their advantages, such as reduced cost, reliability and the absence of commutators, which make them adapt to unfavourable conditions with lower maintenance requirement. However, higher-order models of AC machines, nonlinearities in model equations, uncertainties in parameters and load disturbances make induction motors difficult to control than that of DC motors. In this paper, a robust control strategy considering the recent advances in technology is proposed employing input-output feedback linearization for the exact decoupling of electromagnetic torque and rotor flux using fractional-order sliding mode controller (SMC) for the outer speed loop. The sliding mode observer is also designed to extract the rotor flux from the DC input voltage of the inverter and stator current measurements. Finally, a comparison between the commonly used proportional integral and derivative (PID) controller and the proposed fractional-order SMCs is made and the conclusion is reached.

Fractional Order Sliding Mode Speed Control of Feedback Linearized Induction Motor

Electrical and computer Engineering Department

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Induction machines have of late become the most popular workhorses in the industry replacing DC machines because of their advantages, such as reduced cost,...

Fractional Order Sliding Mode Speed Control of Feedback Linearized Induction Motor

Publicado en línea: 31 oct 2020

Páginas: 109 - 122

Recibido: 29 jul 2020

Aceptado: 18 sept 2020

DOI: https://doi.org/10.2478/pead-2020-0010

Palabras clave
induction motor, input-output feedback, linearization, fractional-order sliding mode controller, SVPWM, load torque observer

© 2020 Yeshiwas Fetene et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Fractional Order Sliding Mode Speed Control of Feedback Linearized Induction Motor

Publicado en línea: 31 oct 2020

Páginas: 109 - 122

Recibido: 29 jul 2020

Aceptado: 18 sept 2020

DOI: https://doi.org/10.2478/pead-2020-0010

Palabras claveinduction motor, input-output feedback, linearization, fractional-order sliding mode controller, SVPWM, load torque observer

© 2020 Yeshiwas Fetene et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
induction motor, input-output feedback, linearization, fractional-order sliding mode controller, SVPWM, load torque observer